LCD TV OWNER’S MANUAL 26LG3DCH 32LG3DC 32LG3DCH Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
10 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. 13 Refer all servicing to qualified service personnel.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Back Panel Information . . . . . . .
SOUND & LANGUAGE CONTROL APPENDIX Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 53 Clear Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 55 Sound Setting Adjustment - User Mode . . . . . . . . . . . 56 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 TV Speakers On/Off Setup .
FEATURE OF THIS TV 6 LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio.
PREPERATION ACCESSORIES PICT UR E TV SO PO W ER UN D 1 SA 4 7 5 - VO PU T 6 9 FLA SHBK TI ME R L IN 3 8 0 AD P RA TI O 2 CC JU M ST M EN UT E CH U PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. RE TU RN EN TE R 1.5V 1.5V Copyright© 2007 LGE, All Rights Reserved.
PREPARATION FRONT PANEL INFORMATION PREPARATION ■ Image shown may differ from your TV. ■ NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). Stand (only 32LG3DC model) :This feature is not available for all models CH CHANNEL(+, -) Buttons VOL VOLUME (+, -) Buttons 32LG3DC model ENTER Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
BACK PANEL INFORMATION Image shown may differ from your TV.
R PREPARATION ANTENNA IN M.P.I. 14 3 2 7 S-VIDEO AUDIO USB IN SERVUCE ONLY (MONO) RESET UPDATE VIDEO 5 RS-232C IN (SERVICE ONLY) PILLOW SPEAKER NORMAL SPEAKER RGB IN (PC) PILLOW SPEAKER ( COMPONENT IN 1 AV IN 1 HDMI/DVI IN 15 (only 26/32LG3DCH model) 4 VIDEO AUDIO AUDIO IN (RGB/DVI) 6 ) 8 REMOTE CONTROL OUT SPEAKER OUT 8 9 1 2 HDMI/DVI IN Digital Connection. Supports HD video and Digital audio.
STAND INSTALLATION (only 32LG3DC model) ■ Image shown may differ from your TV. ■ When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the deviate from abrasion of the tightening part of the bolt. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. Assemble the TV as shown.
PREPARATION CABLE MANAGEMENT ■ Image shown may differ from your TV. PREPARATION 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the Bolt as shown. It will help prevent the power cable from being removed by accident. PROTECTIVE BRACKET 2 Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP 3 12 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches CAUTION 4 inches 4 inches G Ensure adequate ventilation by following the clearance recommendations. G Do not mount near or above type of heat source. PREPARATION 4 inches SWIVEL STAND The TV can be conveniently swivelled on its stand 90° to the left or right to provide the optimum viewing angle.
PREPARATION VESA WALL MOUNTING This TV accepts VESA FDMI compliant mounts via the four screw holes on the back of the TV. We recommend that you use an LG brand wall mount when mounting the TV to a wall. PREPARATION 100 mm R 200 mm ! NOTE G Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount. ( PROTECTION COVER ■ Image shown may differ from your TV.
SECURING THE TV TO THE WALL TO PREVENT FALLING ■ You should purchase necessary components to prevent TV from falling off of the stand. Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
PREPARATION ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed. Wall Antenna Socket Outdoor Antenna (VHF, UHF) R PREPARATION 1.
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 32LG3DC model. ■ HD RECEIVER SETUP Component Connection 1. How to connect Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the TV. PR L R 2. How to use ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP ( ) HDMI Connection 1. How to connect UPDATE UP Connect the digital set-top box to H D M I / D V I I N jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. ■ AV IN 1 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) (MONO) S-VIDEO AUDIO 2.
( ) RGB IN (PC) AUDIO IN (RGB/DVI) SPEAKER OUT REMOTE 8 CONTROL OUT DVI to HDMI Connection 1. How to connect HDMI/DVI IN USB IN SERVUCE ONLY AV IN 1 2. How to use COMPONENT IN Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV. 2 (MONO) S-VIDEO AUDIO RGB IN (PC) VIDEO 1 AUDIO IN (RGB/DVI) AUDIO VIDEO Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB PR L Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. HDMI/DVI IN ■ ■ ■ Turn on the DVD player, insert a DVD. Select the C o m p o n e n t input source on the TV using the I N P U T button on the remote control.
S-Video Connection 1. How to connect Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. 2. How to use ■ ■ Turn on the DVD player, insert a DVD. Select the A V 1 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions. AUDIO ( MONO ) AV AV IN 1 S-VIDEO 2 COMPONENT IN Connect the S-VIDEO output of the DVD to the S - V I D E O input on the TV.
EXTERNAL EQUIPMENT SETUP VCR SETUP ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty. EXTERNAL EQUIPMENT SETUP Antenna Connection 1. How to connect 1 2 Connect the RF antenna out socket of the VCR to the A N T E N N A I N socket on the TV.
Composite (RCA) Connection 1 ) V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) AUDIO ( MONO ) AV IN IN 11 AV S-VIDEO ( AUDIO VIDEO 2. How to use ■ R VIDEO 1 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select the A V 1 input source on the TV using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder 1. How to connect 1 Video Game Set VIDEO ■ ■ H/P Select the A V 2 input source on the TV using the I N P U T button on the remote control. If connected to A V I N 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. VIDEO L/MONO AUDIO R ■ AV IN 2 24 L 2. How to use R EXTERNAL EQUIPMENT SETUP V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors.
PILLOW SPEAKER SETUP ■ (only 26/32LG3DCH model) Connect a pillow speaker to the LCD TV/Monitor. Connect the P I L L O W S P E A K E R output jack on the back of the TV. 2 Connect an acccessory pillow speaker or wired remote control unit to this 6-pin jack. 3 Select P I L L O W S P E A K E R on the rear panel of the TV. ■ PILLOW SPEAKER NORMAL SPEAKER PILLOW SPEAKER NOTE: If the pillow speaker switch is set to Pillow Speaker, no sound will be heard from the TV speakers.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection RGB OUTPUT AUDIO 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the VGA output of the PC to the R G B I N ( P C) jack on the TV. 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. 1 2. How to use UPDATE USB IN RS-232C IN RVUCE ONLY (SERVICE ONLY) Turn on the PC and the TV.
DVI to HDMI Connection UPDATE 1. How to connect HDMI/DVI IN 1 Connect the DVI output of the PC to the H D M I / D V I I N jack on the TV. 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. 2. How to use S-VIDEO AUDIO (MONO) 1 AUDIO VIDEO AUDIO IN (RGB/DVI) 2 Turn on the PC and the TV. ■ Select the HDMI/DVI input source on the TV using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. EXTERNAL EQUIPMENT SETUP PICTURE Move Screen Enter MENU Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config. Position R G • Advanced Control • Reset Screen (RGB-PC) Size Phase Reset 1 MENU 2 ENTER Select P I C T U R E.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move Screen Enter E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Move MENU Prev. Resolution Auto config.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. EXTERNAL EQUIPMENT SETUP PICTURE Move Screen Enter Move MENU Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config.
Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. Move Screen Enter Move MENU Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config. Position R • Advanced Control Initialize Settings. G Yes Size • Reset Screen (RGB-PC) Phase Reset G No EXTERNAL EQUIPMENT SETUP PICTURE 1 MENU Select P I C T U R E.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS (only 32LG3DC model) When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV on or off. POWER TV In AV, Component, RGB-PC, and HDMI/DVI input sources, screen returns to the last TV channel. WATCHING TV / CHANNEL CONTROL INPUT External input modes rotate in regular sequence: TV, AV, Component, RGB-PC, and HDMI/DVI.
NUMBER button — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed. TIMER Select the amount of time before your TV turns off automatically. G p.70 CC Select a closed caption. G p.64 (*In DTV/CADTV mode G p.65, 66) MUTE Switch the sound on or off. G p.35 CHANNEL Select available channels. UP/DOWN ADJUST Adjust the screen resolution, position, size and phase. G p.
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , I N P U T, C H ( + or - )button on the TV or press the P O W E R, I N P U T, C H( + or - ), N u m b e r ( 0~9 9 ) button on the remote control. 1 WATCHING TV / CHANNEL CONTROL 34 2 Select the viewing source by using the I N P U T button on the remote control.
CHANNEL SELECTION 1 Press the C H ( + or - ) or NUMBER buttons to select a channel number. Adjust the volume to suit your personal preference. 1 Press the V O L ( + or - ) button to adjust the volume. 2 If you want to switch the sound off, press the M U T E button. 3 You can cancel the Mute function by pressing the MUTE or V O L ( + or - ) button.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. Move Enter CHANNEL Auto Tuning Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Move Enter Press ‘Yes’ button to begin auto tuning. Yes No 1 MENU Select C H A N N E L. ENTER Select A u t o T u n i n g.
WATCHING TV / CHANNEL CONTROL Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter Move WATCHING TV / CHANNEL CONTROL Auto Tuning Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Enter DIGITAL F G Select channel type and RF-channel number.
Channel Editing A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the topright corner of the screen. Move Enter Auto Tuning Manual Tuning Channel Edit Channel Label Add/Delete 1 MENU Select C H A N N E L. ENTER Select C h a n n e l E d i t.
WATCHING TV / CHANNEL CONTROL CHANNEL LABEL Choose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel. CHANNEL Move Enter WATCHING TV / CHANNEL CONTROL Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Move Enter DIGITAL 2-1 Channel Logo F Disney G Close 1 MENU Select C H A N N E L.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. TV AV1 AV2 Component RGB INPUT ENTER Select the desired input source. TV HDMI AV1 RGB AV2 Component ■ ■ ■ ■ ■ T V: Select it to watch over-the-air, cable and digital cable broadcasts. A V 1 - 2: Select them to watch a VCR or other external equipment. C o m p o n e n t : Select them to watch DVD or a Digital set-top box. R G B: Select it to view PC input.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. ! NOTE G If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and is not covered by warranty.
Set by program Zoom 1 Selects the proper picture proportion to match the source’s image. Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 (16:9 4:3) 16:9) Zoom 2 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. PICTURE CONTROL Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually.
Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard • Brightness 50 • Sharpness 60 • Color 60 • Tint 0 • Backlight E R G E PICTURE CONTROL 1 MENU Select P I C T U R E. ENTER Select P i c t u r e M o d e. ENTER Select V i v i d, S t a n d a r d, C i n e m a, S p o r t, or G a m e..
Picture Mode - Expert Control By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.
ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB-PC mode.
PICTURE CONTROL ADVANCED CONTROL - EYE CARE Dims extremely bright pictures. P i c t u r e M o d e - V i v i d, C i n e m a”.
ADVANCED CONTROL - REAL CINEMA Set up the TV for the best picture appearance for viewing movies. When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E E • Contrast 50 • Contrast 50 • Brightness 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 i R • Sharpness 50 Resetting video configuration... • Color 50 • Tint G • Advanced Control PICTURE CONTROL 1 Select P I C T U R E. ENTER Select R e s e t. 2 3 ENTER MENU 52 Initialize the adjusted value. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Move : Off Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 L : Standard Balance Enter Off On 0 L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 ENTER Select A u t o V o l u m e. ENTER Select O n or O f f. 3 4 RETURN Return to the previous menu.
SOUND &LANGUAGE CONTROL CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices.
PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory and are not adjustable. 1 SOUND Select the sound options: S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e (your own settings). MENU Return to TV viewing.
SOUND &LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move Auto Volume : Off Clear Voice : On Balance Sound Mode 0 Enter L R : Standard R • Treble 50 Treble 50 • Bass 50 • Bass 50 Bass 50 Select A U D I O. Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e. ENTER Select T r e b l e or B a s s. ENTER Make appropriate adjustments.
SRS TRUSURROUND XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material.
SOUND &LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Auto Volume : Off Clear Voice : On 0 Sound Mode L R : Standard SOUND & LANGUAGE CONTROL 58 : On Balance 0 L Balance : 0 R : Standard • SRS TruSurround XT: Off Close 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O. ENTER Select B a l a n c e. 2 3 Make appropriate adjustments.
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Move Enter AUDIO Move E : On Balance Sound Mode E Clear Voice Clear Voice 0 L : Standard R : On Balance Sound Mode 0 L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 : On R : Standard • SRS TruSurround XT: Off • Reset TV Speaker Enter • Reset TV Speaker : On Off On MENU Select A U D I O. ENTER Select T V S p e a k e r. ENTER Select O n or O f f.
SOUND &LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move : Off Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 R Balance Sound Mode 0 Enter L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL 1 MENU Select A U D I O. ENTER Select R e s e t. 3 Initialize the adjusted value. R i Resetting audio configuration...
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. 1 SAP Each time you press the S A P button, M o n o, S t e r e o, or S A P appear in turn. 2 MENU Return to TV viewing. If other languages available on the digital signal, select them with the S A P button.
SOUND &LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Move Enter OPTION Language : English Language Caption : Off Caption Move Enter : English : Off English Menu Audio F English Close SOUND & LANGUAGE CONTROL 1 MENU Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select A u d i o.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Move Enter OPTION Move Enter Language : English Language : English Caption : Off Caption : Off Menu Audio F English G English Close MENU Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select M e n u. 2 3 4 Select your desired language. From this point on, the on-screen menus will be shown in the selected language.
SOUND &LANGUAGE CONTROL CAPTION MODE Caption must be provided to help people with hearing loss watch TV. 1 cc ■ Select Caption O n or O f f. When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Language : English Language : English Caption : Off Caption : Off Enter F Mode On G Service1 Digital Option Close MENU Select O P T I O N. ENTER Select C a p t i o n. ENTER Select O n.
SOUND &LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Language : English Language : English Caption : Off Caption : Off F Enter F Mode On G Service1 Digital Option Close Custom G Size A Standard Font Font 1 Text Color White Text Opacity Solid Bg Color Black Bg Opacity Solid Close SOUND & LANGUAGE CONTROL 1 MENU Select O P T I O N.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. TIME Move Enter TIME Move Enter Manual Clock : Feb/21/2008/ 2:10 AM Clock F : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off Year On Time : Off On Time : Off Month 2 Date 21 Hour 2 AM Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off Minute 10 Eastern Time Zone Daylight Saving Auto Close 1 TIME SETTING MENU Select T I M E. ENTER Select C l o c k.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work.
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. 1 TIMER Select the sleep timer options: Off, 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2 ENTER TIME SETTING 70 ■ You can also adjust S l e e p T i m e r in the T i m e menu.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME Move TIME Move Clock : Feb/21/2008/ 2:10 AM Clock : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off On Time : Off On Time : Off Enter Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off Enter Off On TV will be automatically turned off, in case of No Signal for 10 minutes. 1 Select T I M E. ENTER Select A u t o S l e e p. ENTER Select O n or O f f.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System Enter : Off LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block Enter Off On 1 MENU 2 1 2 3 4 5 6 7 8 9 ENTER Select L O C K. Input the password. 0 Select L o c k S y s t e m.
PARENTAL CONTROL /RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System Enter : Off LOCK Lock System Set Password Set Password Block Channel Block Channel Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER 2 1 2 3 4 5 6 7 8 9 Select L O C K. Input the password. 0 PARENTAL CONTROL / RATING 74 3 Select S e t p a s s w o r d.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Block/Unblock Move CH + Move Page RETURN Previous MENU Exit 1 MENU 2 1 2 3 4 5 6 7 8 9 ENTER Select L O C K. Input the password. 0 Select B l o c k C h a n n e l. 4 ENTER Select a channel to block or unblock.
PARENTAL CONTROL /RATINGS MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL /RATINGS TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view.
DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channels. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL /RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
APPENDIX The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
(Hexa) Code Function Note 08 POWER 0F 0B Code Function Note Remote control Button (Power On/Off) D6 TV Discrete IR Code (TV Input Selection) TV Remote control Button 5A AV1 Discrete IR Code (AV1 Input Selection) INPUT Remote control Button BF COMPONENT Discrete IR Code (Hexa) 4D PICTURE Remote control Button 52 SOUND Remote control Button D5 RGB Discrete IR Code (RGB Input Selection) 0A SAP Remote control Button CE HDMI1 Discrete IR Code (HDMI1 Input Selection) 79 RAT
86
