OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. CS56** P/NO : MFL67466612 (1203-REV02) Printed in Korea www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 2 TABLE OF CONTENTS 25 TROUBLESHOOTING 3 Licenses 26 Environmental Information 3 OPEN SOURCE SOFTWARE NOTICE 26 WEEE 27 SPECIFICATIONS 4 Safety Instructions 10 Installation Procedure 10 ASSEMBLING AND PREPARING 10 13 14 15 15 16 18 18 Unpacking Parts and buttons Lifting and moving the TV Setting up the TV Tidying cables Mounting on a table Mounting on a wall Not using the Desk Type stand 19 MAKING CONNECTIONS 19 20 20 21 21 22 22 2
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
SAFETY INSTRUCTIONS ENGLISH ENG Safety Instructions Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS Do not drop the product or let it fall over when connecting external devices. y yy Otherwise, this may result in injury or damage to the product. Keep the packing anti-moisture material or vinyl packing out of the reach of yy children. y Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
SAFETY INSTRUCTIONS ENGLISH ENG Do not disassemble, repair or modify the product at your own discretion. y yy Fire or electric shock accident can occur. y Contact the service center for check, calibration or repair. If any of the following occur, unplug the product immediately and contact your local yy service centre.
SAFETY INSTRUCTIONS Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to yy keep the former from touching the latter even when the antenna falls. y This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces. yy Also avoid places where there is vibration or where the product cannot be fully supported.
SAFETY INSTRUCTIONS ENGLISH ENG Do not turn the product On/Off by plugging-in or unplugging the power plug to the yy wall outlet. (Do not use the power plug for switch.) y It may cause mechanical failure or could give an electric shock. Please follow the installation instructions below to prevent the product from yy overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
SAFETY INSTRUCTIONS Contact the service center once a year to clean the internal parts of the product. y yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING Owner’s manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Power Cord Stand Screws 8 EA, M4 x 20 (See p. 15) Desk-mount Screw (Only 32/37/42CS56**) (See p. 16) Isolator (Depending on model) (See p.12) Protection cover (See p. 18) Stand Body / Stand Base (See p. 15) ENGLISH ENG or Remote control and batteries (AAA) (See p.
ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Antenna Isolator Installation Guide -- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. -- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna.
ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons Screen Remote control andy intelligent sensors1 Power indicator Speakers OK Touch Button SETTINGS INPUT Touch buttons2 Description Scrolls through the saved programmes. H Adjusts the volume level. H OK Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menu, or saves your input and exits the menus. INPUT Changes the input source. /I Turns the power on or off.
ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration.y CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) y Do not fasten the screws with too much force; otherwise they may be worn out and get loosened.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20 20 10 cm 10 cm 2 m 10 c 10 cm Connect the power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING (This feature is not available for all models.) Using the Kensington security system (This feature is not available for all models.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit . Connect the Kensington security system cable between the TV and a table.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm 10 cm yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
MAKING CONNECTIONS Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). This section on MAKING CONNECTIONS mainly uses diagrams for the 32/37/42/47CS56** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
MAKING CONNECTIONS DVI to HDMI connection Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect. It does not matter which port you use. Choose any HDMI input port to connect.
MAKING CONNECTIONS 21 Composite connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown. Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with th e composite cable as shown.
MAKING CONNECTIONS Audio connection Transmits the video signal from PC to the TV. To transmit an audio signal, connect an audio cable. You may use an optional external audio system instead of the built-in speaker. AUDIO IN (RGB/DVI) NOTE yy If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off. RGB IN (PC) Digital optical audio connection Transmits a digital audio signal from the TV to an external device.
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
USINGyTHEyUSERyGUIDE ENGLISH ENG USING THE USER GUIDE UseryGuideyallowsyyouytoymoreyeasilyyaccessytheydetailedyTVyinformation. 1y PressySETTINGSytoyaccessytheymainymenus. 2y PressytheyREDybuttonytoyaccessytheyCustomer Supportymenus. 3y PressytheyNavigationybuttonsytoyscrollytoyUser GuideyandypressyOK.
MAINTENANCE / TROUBLESHOOTING 25 Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
ENVIRONMENTAL INFORMATION ENGLISH ENG Environmental Information (India only) WEEE Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the e-waste (Management and Handling) Rules, 2011. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.
SPECIFICATIONS 27 Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 32CS56** MODELS Dimensions (W x H x D) Weight With stand (mm) Without stand (mm) 795.0 x 504.0 x 73.5 9.2 With stand (kg) Without stand (kg) Power requirement MODELS Dimensions (W x H x D) Weight 32CS560-TD 32CS560Y-TD 795.0 x 568.0 x 207.0 With stand (mm) 8.
SPECIFICATIONS ENGLISH ENG Environment condition New Zealand, Singapore Operating temperature 0 °C to 40 °C Operating humidity Less than 80 % Storage temperature -20 °C to 60 °C Storage humidity Less than 85 % Television System Programme Coverage Australia Television System Programme Coverage Indonesia, Israel, Myanmar, Sri Lanka Television System Programme Coverage South Africa Television System Programme Coverage Vietnam, Malaysia Television System Programme Coverage Iran, Algeria,
SPECIFICATIONS Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.469 31.5 59.94 60 720x576 31.25 50 1280x720 37.5 44.96 45 50 59.94 60 33.72 33.75 28.125 26.97 27 33.716 33.75 56.25 67.43 67.5 59.94 60 50 23.97 24 29.976 30.00 50 59.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
Network Quick Setup Guide TroubleshootingyNetworkyProblems *yImageyshownymayydifferyfromyyouryTV. *yImageyshownyonyayPCyorymobileyphoneymayyvaryydependingyonytheyOSy(OperatingySystem). WiredyNetworkyConnection 1y PressytheySETTINGSybuttonytoyaccessytheymainymenu.y 2y SelectytheyNETWORKy→yNetwork Status menu. NETWORK Move OK NetworkyConnection NetworkyStatus Internet connection Followytheyinstructionsybelowythatycorrelateytoyyourynetworkystatus. Check the TV or the router.
Network Quick Setup Guide yInstallingy&ySetting Installythey UpdatingytheyTVyFirmware SETTINGS → Customer Support ( a )y→ySoftware Update SoftwareyUpdate PictureyTest yprogrammeyonyyouryPC. 1y Goytoy .yThen,yselectyyouryregion.y 2y SelectySupport.yThen,ySearchyforyyourymodel. 3y SelectyDriversy&ySoftware.yThen,yselecty PICTURE AUDIO SETUP TIME LOCK OPTION NETWORK MYyMEDIA . 4y Youycanyrunytheyprogrammeywhenyinstallationyisycomplete. SoundyTest SignalyTest Product/ServiceyInfo.
