Owner's Manual

PREPARATION

Desktop Pedestal Installation

For proper ventilation, allow a clearance of 4" on each side and from the wall.

Wall Mount: Horizontal installation

For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation

instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and

Setup Guide.

GROUNDING

Ensure that you connect the earth ground wire to prevent

possible electric shock. If grounding methods are not pos-

sible, have a qualified electrician install a separate circuit

breaker. Do not try to ground the unit by connecting it to

telephone wires, lightening rods, or gas pipes.

Power Supply

Short-circuit

Breaker

■

The set can be installed in various ways such as on a wall, or on a desktop etc.

■

The set is designed to be mounted horizontally.

4 inches

4 inches 4 inches 4 inches

4 inches

4 inches 4 inches

4 inches

If you want to install the desk-type stand

fixture protection cover (50PB65

only)

To prevent the foreign materials from

entering the desk-type stand fixture, fix

the desk-type stand fixture protection

cover by using the supplied bolts as

shown at the figure.

Bolts

Desk-type stand

fixture protection cover