Owner's Manual

GB-33
WATCHING TV / PROGRAMME CONTROL
FREESAT PROGRAMME TUNING IN FREESAT INPUT  
Switch to Freesat input using the FREESAT button.
(FREESAT button toggles between Freesat and Non-Freesat TV modes.)
If you select this function in Non-Freesat mode, the TV mode will be automatically switched to Freesat mode.
Use this to automatically find and store all available Freesat programmes.
When you start auto programming, all previously stored service information will be deleted.
1
MENU
Select SETUP.
• If you have selected On in LOCK > Lock System
menu, you will be prompted to enter your password
to access. Use NUMBER buttons to input a 4-digit
password.
• If you search the Freesat programme for the rst
time, your TV will attempt to detect the Freesat
signal before entering your postcode.
- When the Freesat signal is detected, press the OK
button to go to the next step.
- If the Freesat detection fails please check that the
satellite cable are connected correctly.
• To stop the search, press the OK button during
channel search.
• The freesat service uses the Astra2 satellites at
28.2° East.
2
OK
Select Freesat Tuning.
3
OK
Select Yes.
4
OK
Display Freesat Tuning.
5
Enter your full postcode including a space for local services.
6
Select Search.
7
OK
Run Freesat Tuning.
The search results will appear.
The found programmes are automatically saved in order.
• Press the MENU button to return to normal TV viewing.
• Press the RETURN button to return to the previous screen.