Owner's Manual

GB-34
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
NONFREESAT PROGRAMME TUNING (IN FREESAT INPUT  
Switch to Freesat input using the FREESAT button.
(FREESAT button toggles between Freesat and Non-Freesat TV modes.)
If you select this function in Freesat mode, the TV mode will be automatically switched to Non-Freesat mode.
If you want to tune more satellite programmes besides the Freesat programmes, use this function.
1
MENU
Select SETUP.
• If you have selected On in LOCK > Lock
System menu, you will be prompted
to enter your password to access. Use
NUMBER buttons to input a 4-digit
password.
• If the transponder you require is not
listed, select User Dened and enter the
transponder details you require.
• To stop the search, press the OK button
during channel search.
• Some programmes can be tuned more
than once. You can delete unwanted
programmes later by pressing the red
button in Programme Edit. (►p.39)
• Satellite was preset to Astra 2 satellites
at 28.2° East.
2
OK
Select Non-Freesat
Tuning.
3
OK
Display Non-Freesat
Tuning.
4
OK
OK
Select Transponder
and select a value.
5
OK
Select Network Search and select Enable or Disable.
6
OK
OK
Select Scrambled Type and select All or FTA.
7
OK
OK
Select Channel Type and select among All, TV and Radio.
8
Select Search.
9
OK
Run Non-Freesat Tuning.
The search results will appear.
The found programmes are automatically
saved in order.
• Press the MENU button to return to normal TV viewing.
• Press the RETURN button to return to the previous screen.