Owner's Manual

Table Of Contents

GB-52

WATCHING TV / PROGRAMME CONTROL

NETWORK IN FREESAT MODE Freesat (For Future Use)

Switch to Freesat mode using the FREESAT button.

(FREESAT button toggles between Freesat and Non-Freesat TV modes.)

The function enables you to view or set the network connection information for the Freesat interactive services. (Freesat

service for the future)

Ensure that the TV is correctly connected to the local area network (LAN) and can access the internet. (►p.105)

Select SETUP.

• If you have selected On in LOCK > Lock System menu, you will be

prompted to enter your password to access. Use NUMBER buttons to

input a 4-digit password.

• Most users use a router or modem that has a DHCP server function can

automatically be allocated an IP address.

•

Connected will appear when internet is successfully connected.

• MAC Address is a unique address that identies your TV’s hardware in

the network.

Select Network.

Select DHCP or Static.

If you use a router or modem that has a DHCP (Dynamic Host Configuration Protocol)

server function, select DHCP. The IP address will automatically be determined.

If there is no DHCP server on the network and you want to set the IP address manually,

select Static.

When selecting Static, enter values for IP Address, Subnet Mask, Gateway and DNS

Server.

Select Save.

Select Close.

• Press the MENU button to return to normal TV viewing.

• Press the RETURN button to return to the previous screen.