Lifds Good LCD TV OWNER'S MANUAL 19LH20 32LH30 19LU55 22LH20 37LH30 22LU55 26LH20 42LH30 26LU55 52LH20 47LH30 57LH20 42LH20 32CL20 32LFll 37LFll 22LH200C 47 LF21 42LFll 47LFll Please read this manual your set and retain it The model and sel on the carefully Rec before operating located V. ever need service. Serial: This product qualifies for ENERGY STAR in the "factory default (Home Use)" setting. 1 -800-243-0000 usa co_m_ . u_, 1 -888-865-3026 usa com_od_ u_ .
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock this product hazards, do not expose to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLEPARTS INSIDE. REFERTO Class B digital device This equipment QUALIFIED SERVICEPERSONNEL. has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS O Read these instructions. Protect the power cord from being walked on Keep these instructions. or pinched Heed all warnings. receptacles, and the point where they exit from the apparatus. particularly at plugs, convenience Follow all instructions. O Do not use this apparatus near water. Only use attachments/accessories the manufacturer. O by Clean only with dry cloth.
SAFETYINSTRUCTIONS Never touch this apparatus or antenna a thunder or lighting storm. during O WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV 0 When mounting with a TV on the wall, make sure wet hands. Do not install not to install the TV by the hanging power and near flammable signal cables on the back of the TV.
@ @ ANTENNAS Outdoor antenna If an outdoor precautions should head grounding antenna Install your is installed, below. An outdoor not be located power follow the antenna system in the vicinity lines or other light or lines or circuits as death or serious injury can occur. Be sure the antenna to provide some surges and built-up Section system is grounded protection a bookcase.
CONTENTS WARNING / CAUTION SAFETY INSTRUCTIONS ............................ 2 .......................... 3 Channel Setup - Auto Scan (Auto Tuning) ........................... 54 - Add / Delete Channel (Manual Tuning) ...... 55 FEATURE OF THIS TV ............................... 8 - Channel Editing ........................................ Channel List .................................................... 56 57 Favorite Channel Setup / Favorite Channel List.. 58 Brief Information .......................
Auto Volume Leveler (Auto Volume) ................. 80 Clear Voice II ................................................... 81 Preset Sound Setting (Sound Mode) ................ 82 Sound Setting Adjustment - User Mode ........... 83 Balance .......................................................... 84 TV Speakers On/Off Setup ............................. 85 Audio Reset ................................................... 86 Stereo/SAP Broadcasts Setup .......................... 87 Audio Language .....
FEATURE OF THIS TV High-definition television. High-resolution digital r_ DOLBY DIGITAL i__'i. j[_ _ _I' television playback composed of roughly broadcast a million orand more pixels, system 16:9 aspect-ratio I Manufactured under license from Dolby Laboratories. "Dolby "and the double-D symbol are trademarks of Dolby Laboratories. screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions.
PREPARATION ACCESSORIES Ensure that the following accessories dealer where you purchased The accessories included are included with your TV. If an accessory is missing, please contact the the TV. may differ from the images below. _D rT1 _D 0 z Owner's Manual CD Manual Remote Control, Batteries Power Cord Not included with all models When using the VGA (D-sub * Wipe spots on the exterior only with the polishing cloth.
PREPARATION FRONTPANELINFORMATION _ Image shown may differ from your TV. m 19/22/26LH20, 22LH200C MENU i INPUT Button 0 z POWER Button Button ENTER VOLUME CHANNEL Button (-, 4-) Buttons (V,A) Buttons ii:: _iiiiiiii:iiiiii:iiii ))))) 32/37/42LH20, 32/37/42/47LH30 CHANNEL (A,T) Buttons __ VOLUME (+,-) Buttons -- ENTER Button -- MENU Button -- INPUT -- POWER Button SPEAKER Remote Control Power/Standby Sensor, Indicator llluminates red in standby mode.
m 32/37/42/47LFll, © z 47LF21,32CL20 CHANNEL ( ^, v) Buttons VOLUME (+,-) Buttons SPEAKER -- ENTER Button MENU Button Power/Standby Indicator llluminates red in standby mode. llluminates blue when the set is switched Remote Control INPUT Button on.
PREPARATION ,,,IImage shown may differ from your TV. _e 19/22LU55 MENU m Button ENTER Button _e INPUT Button © z POWER Button VOLUME CHANNEL (-, +) Buttons (v, ^) Buttons 26LU55 .... ......... ............... _ ......
BACK PANELINFORMATION _ Image shown may differ from your TV.
PREPARATION ""_Image shown may differ from your TV.
_D m _D O z O @ ANTENNA/CABLE USB IN SERVICE ONLY Used for software updates. O AV (Audio/Video) IN Connect over-the air signals to this jack. Connect cable signals to this jack. IN Analog composite connection. definition video only (480i). Supports standard @ RS-232C IN (CONTROL Used by third & SERVICE) PORT party devices. This port is used for Service or Hotel mode. O HDMI/DVI IN, HDMI IN @ COMPONENT Digital Connection. Supports HD video support 480i.
PREPARATION STAND INSTRUCTIONS (For 19/22LH20,22LH200C) _ Image shown may differ from your TV. "O INSTALLATION m O © z Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown until you hear it click.
DETACHMENT O Carefully cushioned place the TV screen side down on a surface to protect "0 _o the screen from m damage. _o 0 z Loose the bolts from TV. Detach the stand from TV. PROTECTION COVER O Insert the PROTECTION COVER into the TV. _ _ii_ ¸ !_ PROTECTION Fix the 4 bolts securely back of the TV.
STAND INSTRUCTIONS (For 26/32/37/42LH20, 32/37/42/47LH30) ,,,iImage shown may differ from your TV. "O INSTALLATION m O © z Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 bolts securely back of the TV.
DETACHMENT m O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 0 © z Loose the bolts from TV. Detach the stand from TV. PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.
PREPARATION STAND INSTRUCTIONS (For 32/37/42/47LF11,47LF21,32CL20) ,,,iImage shown may differ from your TV. -O INSTALLATION (For 32/37/42LFll, 32CL20) m O If your TV has a protection remove the tape. And carefully O z tape attached, place the TV screen side down on a cushioned surface to protect the screen from damage. e Assemble the parts of the STAND with COVER BODY BASE of the TV by using the 4 STAND BODY screws supplied. COVER BASE Assemble the TV as shown.
DETACHMENT m O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. © z Loose the bolts from TV. Detach the stand from TV. PROTECTION COVER After removing protection the cover stand, install the included over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.
PREPARATION STAND INSTRUCTIONS (For 19/22/26LU55) ,,,IImage shown may differ from your TV. INSTALLATION "O _o m _o O © z Carefully cushioned place the TV screen side down on a surface to protect the screen from damage. O Fix the bolts securely using the holes.
DETACHMENT @ Carefully cushioned place the TV screen side down on a surface to protect the screen from damage. © Z Loose the bolts and then detach the stand from TV. O Loose the bolts from TV. And detach the COVER BASE from TV. 19/22LU55 26LU55 COVER BASE 19/22LU55 O Detach the STAND BODY from TV.
PREPARATION VESAWALL MOUNTING Install your wall mount on a solid wall perpendicular contact to the floor. When attaching to other building materials, please your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting LG recommends that wall mounting the TV to a wall. r'rl be performed by a qualified professional installer.
CABLEMANAGEMENT ,,,IImage shown may differ from your TV. For 19/22/26LU55 "O m O fter connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables. For 32/37/42/47LFll, © z 47LF21,32CL20 O onnect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. O Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT O CLIP Fit the CABLE MANAGEMENT CLIP as shown.
PREPARATION CABLE MANAGEMENT _ Image shown may differ from your TV. For 19/22LH20, m 22LH200C O onnect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. O Install the CABLE MANAGEMENT CLIP as shown. © z CABLE MANAGEMENT O Fit the CABLE MANAGEMENT CLIP as shown. How to remove the CABLE MANAGEMENT Hold the CABLE MANAGEMENT backward.
For 26/32/37/42LH20, 32/37/42/47LH30 -O O _o onnect the cables as necessary. To connect additional equipment see the EXTERNAL EQUIPMENT SETUP section. m _o © z O Install the CABLE MANAGEMENT shown. CLIP as CABLE MANAGEMENT O CLIP ut the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
PREPARATION DESKTOP PEDESTALINSTALLATION _ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. _D r1-1 4 inches _D 4 inches 4 inches 4 inches © z SWIVELSTAND (Except After installing 19/22LH20, 22LH200C, 19/22/26LU55) the TV, you can adjust the TV set manually to the left or right direction your viewing position.
ATTACHING THE TV TO A DESK (Except 19/22LH20, 22LH200C,19/22LUS5, The TV must be attached 47LH30, to a desk so it cannot 47LF11,47LF21 ) be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand _D rT1 _D © z 1-Screw (provided as parts of the product) Desk Stand 1-Screw (provided as parts of the product) Desk KENSINGTON SECURITY SYSTEM _ This feature is not available for all models.
PREPARATION SECURING THE TV TO THE WALL TO PREVENTFALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). ,,,iImage shown may differ from your TV. m We recommend Additionally, © z potentially Caution: that you set up the TV close to a wall so it cannot fall over if pushed backwards.
,,,ITo prevent damage do not connect to the power outlet until all connections are made between the devices. ""_Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) _D Wall Antenna Socket or Outdoor Antenna without m a Cable Box Connections. _D For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ,,,_ To prevent the equipment damage, never plug in any power cords until you havefinished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 26/32/37/42LH20. HD RECEIVERSETUP This TV can receive digital you do receive digital r'_ Component over-the-air/digital signals from a digital cable signals without set-top an external box or other digital external digital set-top box. However, if device. Connection x _D I.
HDMI Connection 1. How to connect O onnect the digital set-top box to the HDMI/DVI IN or HDMI/DVl IN 1/2"/5" jack on the TV. m X e m No separate audio connection is necessary. HDMI supports both audio and video. z m _D 2. How to use Turn on the digital set-top C box. m (Refer to the owner's manual for the digital ,l_Select the HDMI or HDMI1/2"/3" z set-top box.) input source on the TV m using the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect m x O Connect the DVI output of the digital set-top box to the HDMI/DVl IN or HDMI/DVl IN 1/2" jack on the TV. O Connect AUDIO m _o z m X:) c the digital set-top box audio output IN (RGB/DVI) jack on the TV. to the "0 m z m 2. How to use c "0 Turn on the digital set-top box.
DVD SETUP Component Connection 1. How to connect O Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). m x .-I m z m O Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV. ,0 c m z .-I 2. How to use 1""13 .-.I c 01_ Turn on the DVD player, insert a DVD. 0_Select the Component input source on the TV using the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP Composite (RCA) Connection 1. How to connect O m x .-t Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). m z 2. How to use m JC) c Turn on the DVD player, insert a DVD. 01_ Select the AV orAV 1/2 _ input source on the TV using the INPUT button on the remote control. m z .
VCR SETUP Antenna Connection 1. How to connect m x m O _o Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN sock- z et on the TV. m XD c "O O Connect the antenna cable to antenna in socket of the VCR. the m RF z Wall Jack m c "O 2. How to use Antenna 01_ Set VCR output switch to 3 or 4 and then tune TV to the same channel number. 01_ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.
EXTERNALEQUIPMENT SETUP Composite (RCA) Connection 1. How to connect m x m _o z _> O Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). m X:) c "O 2. How to use m z 01_ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) m c "O 01_ Select the AV or AV 1/2 _ input source on the TV using the INPUT button on the remote control.
OTHERA/V SOURCESETUP Camcorder 1. How to connect 0 Connect the Video Game Set AUDIO/VIDEO between TV and external Match the jack colors. jacks equipment. r'_ x m _o z (Video = yellow, Audio Left = white, and Audio Right = red) m X_ c 2. How to use m z 01_ Select the AV2 _ input source on the TV using the INPUT button on the remote control. ,i_If connected to AV or AV the AV or AVI IN I input, select m c -O input source on the TV. 01_ Operate the corresponding external equipment.
EXTERNALEQUIPMENT SETUP AUDIO OUT CONNECTION (Except 19/22LH20,22LH200C) Send the TV's audio to external via the Audio Output port. 5.1 -channel connect If you want to enjoy digital AUDIO OUT terminal audio equipment broadcasting through on the back of TV to a Home Theater 1. How to connect m x m z O Connect end of the optical cable to the TV port of OPTICAL one DIGITAL AUDIO OUT.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection m 1. How to connect x m _o z O onnect the VGA output (PC) jack on the TV. of the PC to the RGB IN m X:) c O Connect the PC audio output (RGB/DVI) jack on the TV. to the AUDIO IN "0 m z 2. How to use 01_ Turn on the PC and the TV. m c -O 01_ Select the RGB-PC input source on the TV using the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect m O onnect the DVI output of the PC to the HDMI/DVI IN or HDMI/DVI IN 1/2" jack on the TV. O Connect the PC audio output (RGB/DVl) jack on the TV. x m _o z m X:) c to the AUDIO "O m z 2. How to use Turn on the PC and the TV. m c "O 01_ Select the HDMI or HDMI1/2" using the INPUT button * HDMI 2: Except 19/22LH20, 42 input source on the TV on the remote control.
r'_ X m _D z m x_ C m z m Supported Display Specifications For 19/22/26/32/37/42LH20, 19/26LU55, 22LH200C, 32CL20 C (RGB-PC, HDMI-PC) For 32/37/42/47LH30, 22LUSS, 32/37/42/47LF11,47LF21 31 •469 70•08 31.468 70.09 31.469 70•08 31.469 70.08 31 •469 59.94 31.469 59.94 37.879 60•31 35.156 37.879 56.25 60.31 48.363 60•00 48.363 60•00 4Z776 59.87 4Z776 59.87 4Z720 59.799 4Z712 60.015 63.981 60.02 75.00 60•00 66 587 5_ _34 • _. _ _ ................. 6__ ............
EXTERNALEQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, m Phase, and Size can also be adjusted. You can use this function only when the PC resolution is set to 1024X768, x m _o z m X:) c m z m c "0 Select PICTURE. Select Screen (RGB-PC). Select Resolution. Select the desired resolution. 44 1280X768 or 1360X768.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, not correct, try using the manual settings or a different if the image is still resolution or refresh rate on the PC. r'_ x m z m c m z m c Select PICTURE. Select Screen (RGB-PC). 01_ If the position correct, 011_ If picture after Auto Select Auto Config.. of the image is still not try Auto adjustment can adjust Phase. needs to adjustment the again.
EXTERNALEQUIPMENT SETUP Adjustment If the picture for screen Position, is not clear after auto adjustment Size, and Phase and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. m x m z m _D c m z m c Select PICTURE. _ Position: ture Select Screen (RGB-PC). to left/right Size, or Phase. is to adjust pic- and up/down as you prefer.
Screen Reset (Reset to original factory values) Returns Position, This feature Size, and Phase to the default factory settings. operates only in RGB-PC mode. m x m _o z m c m z m c -0 Select PICTURE. Select Screen (RGB-PC). Select Reset. Select Yes.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INFO Displays channel information at the top of the screen. _ p.59 AV MODE Toggles through preset Video and Audio modes. _ p.62 POWER Turns the TV on from standby or off to standby. -r" z < N I > z z fT1 N © Z © INPUT Rotates through inputs. Also switches the TV on from standby. _ p.60 ENERGYSAVING Adjusts the Energy Saving. _ p.76 VOLUME UP Adjusts the volume.
NUMBER button -- (DASH) LIST FLASHBK THUMBSTICK (Up/Down/Left Right/ENTER) MENU RETURN Used to enter a program number for multiple program channels such as 2-1,2-2, etc. Displays the channel table. _ p.57 Tunes to the last channel viewed. Navigates the on-screen N -r" z menus and adjusts the system settings to your preference. < Displays the main menu or clears all on-screen displays and return to TV viewing. Allows the user to move return one step in an interactive function.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV @ First, connect power cord correctly. And switch the AC power control switch on TV (Except 19/22LH20, 22LH200C, 32/37/42/47LF11,47LF21,32CL20). At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the (b/l, POWER, INPUT, CH (^ or v ), Number (0~9) Select the viewing source by using the INPUT 01_ This TV is programmed "-r" z When mode.
INITIAL SETTING This Function guides the user to easily set the essential chasing the TV. It will be displayed vated from the user menus. items for viewing the TV for the first on the screen when turning 01_ Default selection is "Home Use". We recommend ture in your home environment. the TV on for the first time. setting the TV to "Home Use" time when pur- It can also be acti- mode for the best pic- 01_ "Store Demo" Mode is only intended for use in retail environments.
WATCHING TV / CHANNEL CONTROL ON-SCREENMENUSSELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. -r" z < N -r" > Z Z fT1 T N 0 Z _m 0 For USA Display each menu. Select a menu item. Accept the current selection. Return to TV viewing.
QUICK MENU Your TV's OSD (On Screen Display) Q.Menu may differ slightly (Quick Menu) is a menu of features from what is shown in this manual. which users might use frequently. [] Aspect [] Picture Ratio: Selects your desired picture format. Mode: Selects the factory preset picture depend on the viewing environment. ((_ Sound Mode: of program. ((@)) Multi Audio: Selects the factory preset sound for type Changes the audio language (Digital signal).
WATCHING TV / CHANNEL CONTROL CHANNELSETUP Auto Scan (Auto Automatically channel list. finds all channels Run this function antenna Tuning) available if you change your connected residence during TV broadcasting Auto Tuning memorizes through only the channels antenna or cable inputs, and stores them in memory or move the TV. Also, make sure to run this function on the with the hours. available at the time. -r" z < N -r" > Z Z fT1 N 0 Z _m Select CHANNEL.
Add/Delete When selecting ity of the signal Channel (Manual Tuning) DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the qual- being received. -r" z c_ < N -r" > Z Z fT1 Select CHANNEL. 0HThe TV will ask for a password if parental control Select Manual Tuning. has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel N 0 Z 0 search. 01_ When setting the Auto tuning Select DTV, TV, CADTV, or CATV.
WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel List are displayed Edit List are displayed in black and the channels deleted from the Channel Edit in blue. When a channel number is deleted, it means that you will be unable to select it using CH ^ v button during TV viewing. If you wish to select the deleted it in the Channel Edit menu. channel, directly enter the channel number with the NUMBER buttons or select N T z < N I > z z _) Ch.
CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. This padlock is displayed when the channel is locked with parental control. iiii_iii_iiiiiH_iiii_i_i_i_i_iiiiiiiiii_ii_i_i_iii_!iiiiiiii_ii!i_Ji_iiiiHiiii_i_ii_iHI_iii_iiiiiii_iiii_i iii_iii!i!_iiii_iiii!_i_iiii_ii_iii_iiiiii!ii_Wiii!!_ii_iiiiii!iii_!iiiii_iii!_iiii!ii!i N -r" z < Displaying Channel List Display the Channel List.
WATCHING TV / CHANNEL CONTROL FAVORITECHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly for the TV to select all the in-between channels. To tune to a favorite channel, press the FAV (Favorite) button select channels of your choice without waiting repeatedly. or Select your desired channel. Select Del/Add/Fav. N -r" z Select Favorite. < N -r > Z Z Return to TV viewing.
BRIEFINFORMATION Brief Info shows the present screen information. Show the Brief Info on the screen. Return to TV viewing. ¢h -r" z @ @ @ < N -r > z z fT1 N © Z © Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio. Caption : The program contains the Q.MENU one or more caption @ Program title @ Day, Month, Year @ Program start time services. Use menu to select wanted Closed caption.
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Select the desired input source. 19J22,H20, [ TV].i AV ].[Component I 22LH200C: N t __,H_0, 19/22LU55, 32CL20: ! [ .o_,] . [ ._.c ] I TV].1 _V ].[Co_onen_ 1 t z < N -r > z z __,._0, 26LU55, 47LF21, 32/37/42/47LFl1: t I "o_'_ ]- "o_'_]-I "o_"]_[ fT1 N © Z [ TV].1 _w ].[ _w 1.
INPUT LABEL This indicates which device is connected to which input port. _!!i!_!i_!i_!ii!i_!i_!_!_!i_!_i_i_i_i_i_i_!i_!i_i_!_!_ q iiiiiiiiiiiiii i!iii!_! !i!!!i!ii_ ii¸i_ii ¸i!iill ¸ii !!iii:ijili ili ¸iliilii̧¸ii!iiiiiii ii 19/22LH20, 22LH200C With using OPTION menu 26/32/37/42 LH20, 19/22LU55, 32¢1_20 32/37/42/47LH30, 26LU55,47LF21 32/37/42/47LFll With using INPUT button !:iii!ili ii̧¸i i!ill N -r" z < N -1> z z fT1 Select OPTION. Select the source. N 0 Z _m 0 Select Input Label.
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii _i_i_i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i!!_i6!!_!i!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!i!!i!!_!!i!!i!i!i!i!i!i!i!i! ,_,If you select "Cinema" in AV mode, Cinema ! will be selected both for "PIC- TURE menu - Picture Mode" menu - Sound Mode" and "AUDIO respectively.
KEY LOCK The TV can be set up so that it can only be used with the remote This feature can be used to prevent This TV is programmed to remember unauthorized which option control. viewing by locking out the front panel controls. it was last set to even if you turn the TV off. -r" z c_ < N -r > Z Z fT1 N O Z Select OPTION. O Select Key Lock 01_ In Key Select 0 n or Off. Lock 'On', if the TV is turned CH (^ remote v) or NUMBER buttons control. 0_With the Key Return to the previous menu.
WATCHING TV / CHANNEL CONTROL e"-% €_ImPLInK SIMPLINK cables allows you to control and settings. and play other This TV may work with AV devices devices _,mp-,nK logo are fully supported. SIMPLINK can be turned on and off in the user menus. -r" z c_ < N -r" > Z Z fT1 Select OPTION. N 0 Z Select SIMPLINK. 0 Select On or Off. Return to the previous menu. Return to TV viewing.
SIMPLINK Functions Direct Play: out additional _Select Disc AV device: playback: 01_ Power off _Switch Sync After connecting control Enables you to select one of the AV devices connected Control all devices: audio-out: Power AV devices to the TV, you can directly the devices and play media with- settings. connected AV devices by pressing the ^ When you power offthe TV, all connected v to TV. < > , ENTER, I_, II, I L _I_I and I_I_ buttons. devices are turned off.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature HDMI/RGB-PC 1920X1080 lets you choose the way an analog picture input source use 4:3 or 16:9 aspect with a 4:3 aspect ratio ratio. But you is displayed can select all aspect on your TV. ratios in HDMI-PC input. You can select a different aspect ratio depending on input source (analog broadcasting, digital broadcasting, aux). C _D m © z _D © Select PICTURE. _ You can also adjust Aspect the Q.MENU. Select Aspect Ratio.
16:9 4:3 Adjust the picture portion Just horizontally, in a linear pro- to fill the entire screen. want to view a picture 4:3 aspect ratio. Zoom the edges of video signals are cropped 1-27o. Just 4:3 when you with an original Scan Normally Choose Scan turns shows the complete off this cropping and video. -O Choose Zoom when you want to view the picture N without C bottom any alteration. portions However, the top and of the picture will be cropped.
PICTURECONTROL PICTURE WIZARD This feature lets you adjust the picture Use this to calibrate quality the screen quality by easily following When you adjust made. quality of the original by adjusting image. the Black and White Level etc. You can calibrate the image to Low, Recommended or High, you can see the example of the changes you "O N C _D r_ Select PICTURE. N © Z Adjust White Select Picture Wizard. _D © Adjust Color. Adjust Picture Wizard. Adjust Black Level.
e.g) -0 ¢h C _o Adjust Horizontal Sharpness. m ¢h © Z _o © Select input source to apply the settings. Save. Adjust Vertical Sharpness. Finish the Picture Wizard. 01_ If you stop the setting step, the changes the TV. 0_Once the Picture ture quality, Energy to Off before the final will not be saved to Wizard Saving sets the picis changed automatically. Adjust Backlight.
PICTURECONTROL PRESETPICTURE SETTINGS (PICTURE MODE) There are factory setting manually. presets for picture settings available in the user menus. You can use a preset, change each "O N C _D N © Z _D Select PICTURE. 01_Vivid, © Standard, Sport, Natural, Cinema, and Game Settings are preset for the optimum picture quality at the factoSelect Picture Mode. ry. 01_ Vivid: This is the mode to maximize the effect Select Vivid, Cinema, Standard, Sport, Natural, or Game.
MANUAL PICTURE ADJUSTMENT- USERMODE Adjust the picture appearance to suit your preference and viewing situations. "O N C _D m Select PICTURE. Select Picture When Mode. adjusting Backlight function Backlight: This Cinema, Sport, or Game. Select Backlight, Sharpness, Natural, Contrast, Color, or Tint. adjustments. of LCD panel, to control the brightness of the screen. Adjusting the is recommended when setting of the set.
PICTURECONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according You can set the video seeing differently To reset to the factory default after function for each Picture Mode. for each input. making "O N C m N O Z O Select PICTURE. Select Advanced Control. Select your desired options. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. 72 to the special video screen.
EXPERTPICTURE CONTROL By segmenting categories, Expert1 fit, offering the optimal picture and Expert2 provide more categories which users can set as they see quality for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in. "O N C r_l N O Z Select PICTURE. Select Picture Mode. Select 17A°Expertl Select Expert O or I._AExpert2. Control. Select your desired menu option. Make appropriate adjustments.
PICTURECONTROL Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. i,i,iAdjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. i,i,iAdjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
Standard: Displays standard set of colors. Wide: Increase number of colors used. Maximize the utilization of color to increase color quality. Show clearer and distinctive This function Convert yet natural edges in of the video. is enabled in "Picture the color of a different This is the function Mode - Cinema, video to HD color. to filter the specific colors of the video. You can use the RGB filter to set color saturation This is the function This feature Expert". and hue accurately.
PICTURECONTROL ENERGYSAVING It reduces the TV's power consumption The default factory setting complies level to be viewed at home. by lowering the backlight with the Energy Star level. requirements You can increase the brightness of your screen by adjusting the Energy Mode. i ii iiiiiil!i and is adjusted to the comfortable Saving level or by setting the Picture iiiii! i!ii "O N C _D r_l @ N © Z _D © Select PICTURE. 01_ When selecting Screen off after 3 seconds. Select e_ Energy Saving.
PICTURERESET Settings of the selected picture modes return to the default factory settings. "O N C m N O Z O Select PICTURE. Select Picture Reset. Select Yes. Initialize the adjusted value. Return to TV viewing.
PICTURECONTROL POWERINDICATOR - Except 19/22/26LH20, Adjust the power/standby 22LH200C indicator 19/22/26LU55, 32/37/42/47LF11, 47LF21, 32CL20 light of TV front. "0 -4 C _o rrl © z -4 _o © Select OPTION. Standby Light: set the indicator Select Standby Light Select your desired options. Return to the previous menu. Return to TV viewing. 78 01_ Power Indicator. or Power Light.
DEMO MODE Displays a slide show to explain the various feature of this TV. c _o m © z _o Select OPTION. 01_ This feature Setting-Home Select Demo is disabled in "Initial © Use". Mode. Select On to show the various feature of the TV. Return to TV viewing. After a while, Demo Mode starts. If you want to stop the demo, press any button (Except VOL +, - and MUTE button).
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Auto Volume makes sure that the volume regular Because each broadcasting time the channel adjustments station is changed. has its own signal conditions, This feature for each program. 0 c Z z c Select AUDIO. 1-11 N 0 Z .-I Select Auto Volume. 0 Select On or Off. Return to the previous menu. Return to TV viewing. 8O level remains consistent whether you are watching a commercial TV program.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. Select AUDIO. Select Clear Voice II. 0 c Z z Select 0 n or Off. c l'rl Adjustment for Clear Voice Level With selecting O n N 0 Z .-I 0 Select Level. Make appropriate adjustments. Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL PRESETSOUND SETTINGS (SOUND MODE) Sound Mode sound options lets you enjoy the best sound based on the program without any special adjustment as the TV sets the appropriate content. 0 c Z Select AUDIO. 01_ Standard, and Select Sound Mode. l'rl N 0 Z .-I are Cinema, preset for Sport, optimum sound quality at the factory. z c Music, Game Select Standard, Cinema, Sport, Music, or Game. 01_ You can also adjust the Q.MENU. 01_Standard: sound. Music: music.
SOUND SETTING ADJUSTMENT- USER MODE Adjust the sound to suit your taste and room situations. Select AUDIO. Make appropriate Select Sound adjustments. O c Z Mode. Return to the previous menu. _o Select Standard, Cinema, Music, Sport, z Return to TV viewing. or Game. c l'rl Select Treble N 0 Z .-I or Bass. 0 SRS TRUSURROUND XT Select this option to sound realistic. Select AUDIO. If sound quality or volume you want, it is recommended Select SRS TruSurround Select On or Off. XT.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. 0 c Z _o Select AUDIO. z c Select Balance. l'rl N 0 Z .-I Make appropriate 0 Return to the previous menu. Return to TV viewing. 84 adjustments.
TV SPEAKERSONIOFF SETUP Turn the TV speakers off if using external In AV, Component, RGB and HDMI audio equipment. with HDMI to DVl cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a SRS System, turn offthe TV's internal speakers. O c z _o Select AUDIO. z c Select TV Speaker. l'rl N 0 Z .-I Select O n or Off. 0 Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return 0 c Z z c Select AUDIO. l'rl N 0 Z .-I Select Reset. 0 Initialize the adjusted value. Return to TV viewing. 86 to the default factory settings.
STEREO/SAPBROADCASTSETUP For Analog only: This TV can receive MTS stereo programs panies the stereo program if the broadcast if the station transmits and any SAP (Secondary an additional Audio Program) that accom- sound signal. Mono sound is automatically used is only in Mono. 0 c Z _o Analog TV z Digital TV Select Multi Select SAP. Select Mono, Stereo, Return to TV viewing. c or SAP. Audio. Select other languages. l'rl N 0 Z .-I 0 Return to TV viewing.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided This feature operates only in DTV/CADTV mode. O c Z _o Select OPTION. z c Select Audio Language. l'rl N 0 Z .-I Select your desired language. 0 Return to the previous menu. Return to TV viewing. 88 by the broadcasting station.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. 0 c Z Select OPTION. z Select Menu Language. c l'rl Select your desired language. From this point on, the on-screen menus will be shown in the selected language. N 0 Z .-I 0 Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Captions tioning Broadcasting are provided information to help people with if provided and is usually the program's digital System Captions on a program. dialog. hearing Caption/Text, and analog channels on the Antenna/Cable. which was last set when you turned loss watch TV. Select a caption Analog caption if provided displays information by the broadcaster, This TV is programmed the power off.
Digital Choose Other Broadcasting the language System Captions you want the DTV/CADTV Languages can be chosen for digital This function in only available when Caption Captions to appear in. sources only if they are included on the program. Mode is set On. 0 c z Select OPTION. z c Select Caption. l'rl N 0 Z .-I Select 0 n. Select CC1-4, Text1-4, Service1 - 6. 0 or Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV This function captions in only available that appear when Caption on your screen. Mode is set On. O c Z _o Select OPTION. z 01_ Size: c l'rl N 0 Z .-I Select Caption. Set the word size. 01_ Font: Select a typeface 0_Text Color: Choose for the text. a color for the text. 01_ Text Opacity: Specify the opacity for the text color. Select O n. 0 Select Digital 01_ Bg (Background) background color. Option.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically The digital channel signal Set the clock manually from a digital includes if the current channel information signal. for the current time is set incorrectly time provided by the broadcasting station. by the auto clock function. Select TIME. rT1 z Select Clock. Select Auto. Select your viewing area time zone. • U.S.A: Eastern, Central, Pacific, Alaska, or Hawaii.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. If this TV is unplugged once or turn off with the AC power control Select TIME. m m Select Clock. z c_ Select Manual. Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing. 94 switch on the TV, reset the Clock function.
AUTO ON/OFF TIME SETTING This function The Off Time operates only if the current function overrides The TV must be in standby the On time has been set. Time mode for the On If you do not press any button within automatically mode. revert to standby function Time if they are both set to the same time. to work. 2 hours after the TV turns If you turn the TV off using the AC power control not work because the power is blocked.
TIME SETTING SLEEPTIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Select TIME. H To cancel the Sleep m Select Sleep Timer. z Make appropriate adjustments. Return to the previous menu. Return to TV viewing. 96 Timer, f_i_ You can also adjust Sleep the Q.MENU. select Off.
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program this function, and the categories. the following It is also possible to block all program viewing for a time period.
PARENTALCONTROL / RATINGS Lock System Enables or disables the blocking scheme you set up previously. Select LOCK. Input the password. m z © z Select Lock System. Select On or Off. © Return to the previous menu. z Cl 98 Return to TV viewing. 01_ When you select 0 n, the Lock System is enable.
Set Password Change the password _o_ __ by inputting a new password twice. Select LOCK. Input the password. m Select Set Password. Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm. z N © z © Return to the previous menu. z Return to TV viewing.
PARENTALCONTROL / RATINGS CHANNEL BLOCKING Blocks any channels T,sf_ T that you do not want to watch or that you do not want your children } T X t to watch. T Ch. Change _ Navigation CH Page Change _ Previous Block/Unblock Select LOCK. ,_ If a channel is locked, enter the password to unlocked Input the password. Select Block Channel. _D m z N 0 z _D 0 Select a channel to block or unblock. Block or unblock a channel. _D > z c_ Return to the previous menu. Return to TV viewing.
MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according set the ratings limit - For USA to the movie ratings limits by blocking the movie ratings limit only applies __ specified, so children cannot view certain out all the movies with the ratings above a specified to movies shown on TV, not TV programs, Select LOCK. 0_.If such as soap operas. Movie Children movies. You can level.
PARENTALCONTROL / RATINGS TV Rating Children Prevents children rating - For USA from watching does not apply to other certain children's TV programs. TV programs, Unless you block ences in the TV Rating - sub menu, your children can view those according certain to the ratings limit set. The children TV programs intended for mature programs. Select LOCK. 01_ Age (applies to TV-Y, TV-Y7) 0101_ Fantasy Violence Input the password. m z N O z Select TV Rating-Children.
TV Rating General- ForUSA Based on the ratings, _O_ blocks certain TV programs that you and your family 01_ Age (applies to TV-G,TV-PG,TV-14,TVMA). Select LOCK. Input do not want to view. 01_ Dialogue-sexual TV-PG,TV- 14). the password. dialogue (applies to 01_ Language-adult language (applies to TV-PG, TV-14, TV-MA). Select TV Rating-General. Select Age, Dialogue, Sex or Violence. 01_ Sex-sexual situations (applies to TV-PG, TV-14, TV-MA).
PARENTALCONTROL / RATINGS TV Rating English - For CANADA Selecting Canadian English rating system. Select LOCK. 0fu_ IfTV Input the password. French Rating-English is locked, to unlocked or TV Ratingenter the password it temporarily. _o r_l z N © z _o 01_ E (Exempt) Select TV Rating-English. 01_ C (Children) 01_ C8-1- (Children Select E, C, C8+, G, P G, 1 4+, 1 8+, or Blocking Off.
TV Rating French - For CANADA Selecting Canadian French rating system. _@ 0,_E (Exempt) Select LOCK. 0,_G (General) 01_ 8ans+ Input the password. (General-Not convenient for lit- tle children) 01_ 13ans+ (Not convenient for children of _D 13 years and younger) Select TV Rating-French. 01_ 16ans+ (Not convenient r_ z for children of 16 years and younger) 01_ 18ans+ Select E, G, 8ans+, 1 6ans+, 1 8ans+, Return to the previous menu.
PARENTALCONTROL / RATINGS DOWNLOADABLE RATING This function is available This function operates only for digital channels. only when TV has received Region5 Rating data. 01_ Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Select LOCK. 0_,_ If a Downloadable rating is locked, enter the password to unlocked it temporarily. _D m z N O z _D O Input the password. Select Downloadable Rating.
EXTERNAL INPUT BLOCKING Enables you to block an input. !_!_!_!_!_!_!_!_i_i_!i_!_i_i_i_i_!_i_i_i_i_i_i_i_ii_ii_i_iiiiiii_ _i_!i_ii_ii_!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i_!i_!i!il _ i!iii_i!_ii_iii!!_!iiiiii!i!ii!!ii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiilililililil ................ 19/22LH20, 22LH200C 26/32/37/42LH20, 19/22LU55, 32CL20 iiiiii 32/37/42/47LH30, 26LU55, 47LF21 32/37/42/47LF11 _ Select LOCK. Input the password. _D m z Select Input Block. N O z _D Select input source.
APPENDIX TROUBLESHOOTING Check to see if there is any object between the product causing obstruction. Ensure you are pointing IMM Ensure that the batteries are installed with correct ,MM Ensure that the correct remote operating is turned channel. The problem Is the power cord inserted on. may be with the broadcast. into wall power outlet? Check your antenna direction ,f_Test the wall power outlet, and/or location. plug another product's power cord was plugged power cord into the outlet in.
mm_ Press the VOL or VOLUME button. i,i,iSound muted? Press MUTE button. mini Try another channel. The problem may be with the broadcast. i,i,iAre the audio cables installed properly? i,i,iAdjust Balance in menu option. i,i,iA change in ambient when the product humidity is turned or temperature may result in an unusual noise on or off and does not indicate a fault with the product. Check HDMI cable over version 1.3. Check USB cable over version 2.0. Use normal MP3 file.
MAINTENANCE Early malfunctions enjoy your Caution: Careful and regular Be sure to turn the power off and unplug Cleaning 0 can be prevented. cleaning can extend the amount of time you can new TV. the power cord before you begin any cleaning. the Screen Here's a great way to keep the dust offyour water and a little fabric softener screen for a while. Wet a soft cloth in a mixture of lukewarm or dish washing detergent. Wring the cloth until it's almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 18.2 x 13.8 x 6.7 inches 462.4 21.0 x 15.6 x 6.7 inches x 353.0 x 171.0 mm 533.4 x 39Z0 18.2 x 12.1 x 2.5 inches 462.4 x 308.0 x 65.0 x 171.0 mm 21.0 x 13.8 x 2.5 inches mm 533.4 x 351.4 x 65.0 mm 8.3 Ibs / 3.8 kg 10.5 Ibs / 4.8 kg Z9 Ibs / 3.6 kg 10.1 Ibs / 4.6 kg 19.6 Ibs / 8.9 kg 25.3 Ibs / 11.5 kg 1Z1 Ibs / Z8 kg 22.7 Ibs / 10.3 kg m Z C7 X 32.6 Ibs / 14.8 kg 39.6 Ibs / 18.0 kg 28.6 Ibs / 13.0 kg 35.7 Ibs / 16.
31.6 x 22.9 x 8.8 inches 805.0 x 583.0 x 224.0 26.6 36.2 x 25.9 x 11.6 inches mm 922.0 x 659.0 x 29Z0 Ibs / 12.1 kg 32.8 Ibs / 14.9 kg 24.2 Ibs / 11.0 kg 28.8 Ibs / 13.1 kg 39.6 Ibs / 18.0 kg 49.6 Ibs / 22.5 35.7 Ibs / 16.2 kg 43.8 Ibs / 19.
18.1 x 14.6 x Z1 inches 20.8 x 16.4 x Z7 inches 462.0 x 375.0 x 182.0 mm 529.1 18.1 x 12.0 x 2.5 inches 462.0 x 305.0 x 416.6 x 196.0 mm 20.8 x 13.4 x 2.5 inches x 65.0 mm 529.1 x 342.3 x 65.0 mm 9.7 Ibs / 4.4 kg 11.9 Ibs / 5.4 kg 8.1 Ibs / 3.7 kg 10.1 Ibs / 4.6 kg 19.6 Ibs / 8.9 kg 26.8 Ibs / 12.2 kg 16.9 Ibs / Z7 kg 23.3 Ibs / 10.
31.5 x 23.7 x 8.9 inches 801.8 x 604.2 36.2 x 26.8 x 11.5 inches x 227.5 mm 919.6 x 682.5 x 295.8 31.5 x 21.4 x 3.1 inches 36.2 x 24.0 x 3.5 inches 801.8 x 544.1 919.6 x 610.5 x 89.0 mm 26.4 x 79.0 mm Ibs / 12.0 kg 35.4 Ibs / 16.1 kg 23.1 Ibs / 10.5 kg 29.5 40.6 x 29.2 x 11.5 inches 1052.8 x 742.5 x 295.8 x 92.0 Ibs / 13.4 kg 45.1 x 31.7 x 13.5 inches mm 1146.0 x 805.8 40.6 x 26.3 x 3.6 inches 1032.8 x 670.1 x 342.9 1146.0 x 752.8 x 105.0 mm 44.9 Ibs / 20.4 kg 60.
IR CODES ....
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C or an A/V control system) to control 01_ Note: RS-232C on this unit is intended The instructions software. RS-232C below are provided input jack to an external the TV's functions control device (such as a computer externally. to be used with third to help with programming party RS-232C software control hardware or to test functionality Setup i.
RS-232C Configurations Either cable below can be used. PC TV RXD TXD TXD RXD GND GND DTR DSR DSR RTS DTR CTS CTS RTS D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to 'Real Data Mapping'. _> m z c7 X Select OPTION. 0101_ Real data mapping 0 : Step 0 Select Set ID. A : Step 10 (SET ID 10) Choose the desired TV ID number. The adjustment 1-99. range of Set ID is Return to the previous menu.
Command Reference 01 Power List k O0 - 01 1 k r 00 ~ 64 b (_ p.U9) 15. Bass k s 00 ~ 64 k c (p.119) 1 k t 00 - 64 k d ( _p.U9) 1Z Color Temperature k u 00 - 02 ume k e O0 - 01 1 j q (_ p.120) 06. Volume Control k f O0 ~ 64 19. Auto Configuration j u (_ p.120) 07. k g O0 - 64 21 m b O0 - 01 08. Brightness k h O0 ~ 64 22. Key rn c ( , p. 121) 09 k i O0 - 64 m g 00 - 64 10. Tint k j O0 ~ 64 11 k k O0 _ 64 12.
01. Power (Command: To control k a) Power On/Off You can also adjust mute using the MUTE button on remote control. of the TV.
11. Sharpness (Command: *Refer to 'Real data mapping'. k k) To adjust screen sharpness. Acknowledgement[t][ ][set ID][ ][OK/NG] [Data] [x] You can also adjust sharpness in the PICTURE menu. TransmisSion [k] [k][] [set ID][] [Data] [Cr] Data Min: O0 - Max: 64 (*transmit 1 7. Color Temperature (Command: _Refer to 'Real data mapping'. You can also adjust color temperature Acknowledgement [k] [ ][Set ID] [] [OK/NG] [Data] [x] Transmission[k] [u][] (Command: k I) in the PICTURE menu.
Data 5: Thetable above liststhebinary code which must be converted toHexadecimal before sending. Forexample: Thebinary code totunethesubsource toanNTSC cable channel is"10000001",which translates to"81" inHex. * 7th 21. Channel Add/Del (Command: m b) To add and delete the channels. [m] [b] [ ] [Set ID] [ ] [Data] [Cr] Transmission Data 00: Channel Delete Data 01 : Channel Add bit : For which source do you want to change the A_knoWiedgernenL [b][ channel.
OPEN SOURCE LICENSE- This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim this license document, but changing it is not allowed. 1991 the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's licensed at all.
b) You must cause any work that you distribute that in whole or in part contains or publish, or is derived c) Accompany from the it with the information offer to distribute corresponding you received as to the source code. (This alter- Program or any part there of, to be licensed as a whole at native is allowed only for noncommercial no charge to all third license.
If, as a consequence of a court patent infringement patent issues), conditions judgment or for any other or allegation of reason (not limited to are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS Also add information on how to contact you by electronic and paper mail. How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible If the program is interactive, make it output this when it starts in an interactive mode: a short notice like use to the public, the best way to achieve this is to make it free software which everyone can redistribute under these terms.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA To protect Everyone is permitted ified by someone else and passed on, the recipients to copy and distribute this license document, [This is the first counts verbatim copies of but changing it is not allowed. released version of the Lesser GPL.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that each copy an appropriate is linked with the Library has the freedom and the wherewithal and to the absence of any warranty; and distribute warranty; to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and with the library in order to run. a in exchange for a fee. 2.
3. You may opt to apply the terms of the ordinary GNU General the object file is unrestricted, regardless of whether it is legal- Public License instead of this License to a given copy of the ly a derivative work. Library. To do this, you must alter all the notices that refer to plus portions of the library will still fall under Section 6.
For an executable, the library" the required ed for reproducing cial form of the "work that uses must include any data and utility exception, the executable from it. However, as a spe- the include anything materials to be distributed that is normally distributed and so on) of the operating runs, unless that cutable. of other (compiler, itself proprietary the operating accompanies contradicts kernel, the exe- the license libraries that do not normal- system.
If the library does not specify a license version number_ you may choose any version ever published Foundation. 14.1f you wish to incorporate To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively parts of the library into other free programs whose distribution these, write to the author by the Free Software conditions are incompatible to ask for permission.
MOZILLA PUBLIC LICENSE Version 1.1 1 •Definitions• code which is described in the source code notice required by exhibit as original code, and which, at the time 1.0.1. "Commercial use" means distribution the covered code available to a third 1.1. or otherwise making of its release under party. "Contributor" means each entity that tributes to the creation of modifications• this license is not already covered code governed by this license. creates or con- 1.lO.l .
(c) the licenses granted effective in this section 2.1 (a) and (b) are on the date Initial developer original You may not offer or impose any terms on any source code first distributes version that code under the terms of this license. you (d) Notwithstanding section 2.
3.Z (c) Representations. contributor represents that, except as disclosed You may create a larger work by combining with other code not governed modifications are contributor's and/or contributor has sufficient and distribute original creation(s) rights to grant the rights Required notices. covered code by the terms of this license the larger work as a single product. In such a case, you must make sure the requirements license are fulfilled for the covered code. by this license. of this 4.
Z DISCLAIMER OF WARRANTY. COVERED such participant CODE IS PROVIDED UNDER THIS ON AN "AS IS" BASIS, WITHOUT KIND, EITHER WITHOUT sold, distributed, INCLUDING, THE ENTIRE RISK AS TO THE QUALITY or had made, modifications made by that participant. COVERED CODE 8.3. AND PERFOR- MANCE OF SHOULD ANY COVERED CODE PROVE DEFECTIVE IN IS WITH YOU.
11. MISCELLANEOUS• EXHIBIT A -Mozilla Public License• This license represents the complete agreement concerning subject matter hereof. If any provision held to be unenforceable, of this license is such provision shall be reformed only to the extent necessary to make it enforceable• License shall be governed by California (except to the extent applicable erwise), excluding its This law provisions The contents of this file are subject to the Mozilla Public License Version 1.