Owner's Manual

GB-18
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connecting with a Euro Scart Cable
➊
Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the
TV.
➋
Turn on the DVD player, insert a DVD.
➌
Select AV1 input source using the INPUT button on the remote control.
If connected to AV2 Euro scart socket, select AV2 input source.
➍
Refer to the DVD player’s manual for operating instructions.
NOTE
Any Euro scart cable used must be signal shielded.
Copy-protected programmes will not be output on the EURO scart sockets for
legal reasons. Even if it was output, the video signals fed through the EURO
scart sockets will be not recorded by copyright protection systems.
Scart Output
Main Input AV1 (SCART1 Output) AV2 (SCART2 Output)
Digital TV Mute Digital TV
Analogue TV
Mute
(Analogue TV if the TV mode you last
watched is Analogue mode.)
Analogue TV
AV1 (SCART1)
CVBS
AV1 (CVBS)
RGB
AV2 (SCART2) CVBS AV2 (CVBS)
Component Mute
RGB Mute
AV3(CVBS) AV3 (CVBS)
HDMI1
Mute
HDMI2 Mute
HDMI3 Mute
HDMI4 (Only 32/42LF73**) Mute
Connecting the HDMI Cable
➊
Connect the HDMI output of the DVD to the HDMI/DVI IN 1, HDMI IN 2,
HDMI IN 3 or HDMI IN 4 (Only 32/42LF73
**
) jack on the TV.
➋
Select HDMI1, HDMI2, HDMI3 or HDMI4 (Only 32/42LF73
**
) input source
using the INPUT button on the remote control.
➌
Refer to the DVD player’s manual for operating instructions.
NOTE
The TV can receive video and audio signals simultaneously when using a
HDMI cable.
If the DVD does not support Auto HDMI, you must set the output resolution
appropriately.
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t
support HDMI version 1.3, flickering or no screen display can result. Please
use the latest cables that support at least HDMI version 1.3.
►
►
►
►
►
ANTENNA IN
(RGB)
2
3
1(DVI)
(R) AUDIO (L)
AUDIO/
VIDEO
ANTENNA IN
(RGB)
2
3
1(DVI)
ANTENNA IN
(RGB)
2
3
1(DVI)
➊
ANTENNA IN
(RGB)
2
3
1(DVI)
(R) AUDIO (L)
AUDIO/
VIDEO
ANTENNA IN
(RGB)
2
3
1(DVI)
ANTENNA IN
(RGB)
2
3
1(DVI)
➊