Owner's Manual

GB-21
EXTERNAL EQUIPMENT SETUP
INSERTION OF CI MODULE
- To view the encrypted (pay) services in digital TV mode.
- This feature is not available in all countries.
➊
Insert the CI Module to PCMCIA (Personal Computer Memory Card International
Association) CARD SLOT of TV as shown.
For further information, see p.51.
NOTE
Check if the CI module is inserted into the PCMCIA card slot in the right direction.
If the module is not inserted properly, this can cause damage to the TV and the
PCMCIA card slot.
DIGITAL AUDIO OUT SETUP
Sending the TV’s digital audio signal to external audio equipment via the Digital Audio
Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the
OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or
amp).
➊
Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
➋
Connect the other end of the optical cable to the digital audio (Optical) input on
the audio equipment.
➌
Set the “TV Speaker option - Off ” in the AUDIO menu.(►p.85). Refer to the
external audio equipment instruction manual for operation.
CAUTION
Do not look into the optical output port. Looking at the laser beam may damage
your vision.
HEADPHONE SETUP
You can listen the sound through the headphone.
➊
Plug the headphone into the headphone socket.
➋
To adjust the headphone volume, press the + or - button.
If you press the MUTE button, the sound from the headphone is
switched off.
NOTE
AUDIO menu items are disabled when connecting a headphone.
When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
Optical Digital Audio Out is not available when connecting a headphone.
►
►
►
►
►
AV IN 3
L/ MONO
R
AUDIO
VIDEO
H/P
➊
ANTENNA IN
(RGB)
2
3
1(DVI)
➊