LED TV LJ61** LJ62** AAA X2 (M4 X L16) : Depending on model / Abhängig vom Modell / Selon le modèle / In base al modello / En función del modelo / Dependendo do modelo / Afhankelijk van het model / Ανάλογα με το μοντέλο / Odvisno od modela / Típusfüggő / Zależnie od modelu / Závisí na modelu / V závislosti od modelu / În funcţie de model / В зависимост от модела / Sõltub mudelist / Priklauso nuo modelio / Atkarībā no modeļa / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit / Ovisno o mod
1 2 3 4
ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN LAN AUDIO OUT/ H/P OUT
H/P OUT Satellite IN PCMCIA CARD SLOT OPTICAL DIGITAL AUDIO OUT COMPONENT IN VIDEO/Y PB PR L/MONO AUDIO R AV IN VIDEO/Y PB PR L/MONO AUDIO R
COMPONENT IN VIDEO/Y PB VIDEO AV IN PR L/MONO AUDIO R AUDIO VIDEO/Y PB PR L/MONO AUDIO R VIDEO L/MONO AUDIO R
1 2 3 4
0 1 2 A E D B G1 G2 F A 32LJ610V-ZD 32LJ622V-ZB 739 B 472 C 168 C D 441 E F 84 4.90 F G1 G2 4.
*MFL69649102*
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69649209* P/NO : MFL69649209(1706-REV01) Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Warning! Safety instructions ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
•• Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product. •• If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
ENGLISH •• Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. •• Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. •• Prevent dust collecting on the power plug pins or outlet.
Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. •• When holding the TV, the screen should face away from you to avoid damage. ENGLISH •• Do not use any unapproved items to ensure the safety and product life span.
Mounting on a table You can simply operate the TV functions, using the button. 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation. ENGLISH Using the button 10 cm 10 cm 10 cm 10 cm 10 cm Basic functions 2 Connect the power cord to a wall outlet. Power On (Press) Power Off1 (Press and Hold) Menu Control (Press2) Menu Selection (Press and Hold3) 1 All running apps will close, and any recording in progress will stop.
•• Make sure that children do not climb on or hang on the TV. Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket.
ENGLISH Connections (notifications) Adapter connection Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. (Depending on model) •• The external device connection may differ from the model.
Remote control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. Make sure to point the remote control toward the remote control sensor on the TV.
Magic remote functions ENGLISH (Some buttons and services may not be provided depending on models or regions.) When the message “Magic remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching the and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV.
Registering magic remote How to register the magic remote To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control. * If the TV fails to register the Magic Remote, try again after turning the TV off and back on. How to deregister the magic remote Press the and (HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.
Troubleshooting Cannot control the TV with the remote control. ENGLISH •• Check the remote control sensor on the product and try again. •• Check if there is any obstacle between the product and the remote control. •• Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. •• Check if the product is turned on. •• Check if the power cord is connected to a wall outlet.
Specifications 32LJ60** Wireless module specification (Only LJ55**, LJ59**, LJ60**, LJ61**) (Only 32LJ622V-ZB, 43/49LJ624V-ZC, 55LJ625V-ZB) AC/DC Adapter ENGLISH •• As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. •• For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
CI Module (W x H x D) ENGLISH Environment condition 100.0 mm x 55.0 mm x 5.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
MANUEL D'UTILISATION CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE Veuillez lire attentivement ce manuel avant de mettre le produit en service et conservez-le afin de pouvoir vous y référer ultérieurement. www.lg.
2 CODES DE TOUCHE FRANÇAIS FR CODES de touche • Cette option n'est pas disponible sur tous les modèles.
CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE 3 • L’image ci-dessous peut être différente de celle affichée sur votre téléviseur. Connectez la prise USB pour convertisseur de série / RS-232C à un périphérique de contrôle externe (comme un ordinateur ou un système de contrôle A/V) pour contrôler de l'extérieur les fonctions du produit. Remarque : Le type de port de contrôle sur le téléviseur peut varier selon les modèles.
USB USB IN IN 4 CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE (PC) (PC) (TV) (TV) RS-232C IN (CONTROL • Vous devez vous munir d'une prise jack avec un câble RS-232 pour& SERVICE) établir la connexion entre le PC et le téléviseur et dont les références se trouvent dans le manuel. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * Pour les autres modèles, utilisez le port USB. * L'interface de connexion peut être différente de celle de votre téléviseur.
CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE 5 Paramètres de communication • Bit d'arrêt : 1 bit • Code de communication : Code ASCII • Utilisez un câble croisé (inversé). Liste de référence de commandes (selon le modèle) COMMAND1 COMMAND2 01. Alimentation* 02. Format de l'image 03. Désactivation de l'écran 04. Volume en sourdine 05. Contrôle de volume k a k c k d k e DONNÉES (Hexadécimales) 00 à 01 15. Balance 16. Couleur (p.7) Température 17. Méthode (p.
6 CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE FRANÇAIS FR Protocole de transmission / réception Transmission Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : Première commande permettant de contrôler la TV. (j, k, m ou x) [Command 2] : seconde commande permettant de contrôler la TV. [Set ID] : Vous pouvez modifier le réglage [Set ID] pour choisir le numéro d'ID du moniteur souhaité dans le menu Option. La plage d'ajustement du téléviseur est de 1 à 99.
CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE 7 01. Alimentation (Command : k a) ►► Pour *activer/désactiver l'appareil.
8 CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE FRANÇAIS FR Données Min : 00 à Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Teinte (Command : k j) ►► Permet de régler la teinte de l'écran. Vous pouvez aussi ajuster la teinte dans le menu IMAGE. Transmission [k][j][ ][Set ID][ ][Data][Cr] Données Rouge : 00 sur vert : 64 * (selon le modèle) 14. Graves (command : k s) ►► Permet de régler les graves. Vous pouvez aussi régler les graves dans le menu AUDIO.
CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE 0 0 5e bande 1 0 1 0 0 20 (décimal) Ack [v][ ][Set ID][ ][OK/NG][Data][x] * Dépend du modèle et peut être modifié si le mode du son est réglé sur une valeur d'équaliseur ajustable. 19. Économie d'énergie (Command : j q) ►► Pour réduire la consommation d'énergie du téléviseur. Vous pouvez aussi régler l'option d'économie d'énergie dans le menu IMAGE.
10 CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE FRANÇAIS FR de chaîne physique - 22 : TV terrestre (TNT) – N'utilisez pas de numéro de chaîne physique - 26 : TV par câble (CADTV) - N'utilisez pas de numéro de chaîne physique - 46 : TV par câble (CADTV) – N'utilisez que le numéro de chaîne majeur (chaîne unique) Deux octets sont disponibles pour chacune des chaînes majeures et mineures. De manière générale, l'octet bas est utilisé tout seul (l'octet haut est 0).
CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE ►► Pour sélectionner la source d'entrée de l'image principale. Transmission [x][b][ ][Set ID][ ][Data][Cr] DONNÉES 00 : TNT 01 : CADTV 02 : TNT par satellite 10 : ATV ISDB-BS (Japon) 03 : ISDB-CS1 (Japon) 04 : ISDB-CS2 (Japon) 11 : CATV 20 : AV ou AV1 21 : AV2 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 Ack [b][ ][Set ID][ ][OK/NG][Data][x] * Cette fonction dépend du modèle et du signal. 25.
12 CONFIGURATION DU PÉRIPHÉRIQUE DE CONTRÔLE EXTERNE FRANÇAIS FR 27. Auto Configure (Configuration automatique) (Command: j u) (selon le modèle) ►► Permet de régler la position de l'image et de réduire automatiquement le tremblement de l'image. Cette option ne fonctionne qu'en mode RGB (PC).