LED TV ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. 32LN560HBUA a 12 14 16 20 b c X6 (M4 X L20) www.lg.
Read Safety and Reference. WARNING : To prevent injury, this apparatus must be securely attached to the desk/wall in accordance with the Safety and Reference. Leer Seguridad y Consultas. ESPAÑOL ADVERTENCIA : Para prevenir daños, este aparato debe ser instalado a la mesa/pared de acuerdo a la guía de Seguridad y Consultas. Lisez Sécurité et références.
5 6 c 7
Kg 32LN560HBUA 739 739 495 495 (29.0) (29,0) (19.4) (19,4) 241 (9.4) 241 (9,4) 441 441 (17.3) (17,3) 84 (3.3) 84 (3,3) 6.05 6,05 4.85 4,85 (13.3) (13,3) (10.
*MFL71978802* (2211-REV00)
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 32LN340CBUD 32LN340HBUA 32LN560HBUA 32LN570HBUA *MFL71957802* (2211-REV00) www.lg.com Copyright © 2022 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS ENGLISH Important Safety Instruction Warning! Safety instructions Preparing Optional Extras 8 Wall Mounting Bracket Lifting and Moving the TV Mounting on a Table 10 Using the Kensington Security System (optional) 10 Attaching the TV to a desk Securing TV to the Wall Mounting on a Wall Connections 13 Antenna/Cable 13 Other connections 15 Network setup Using the Button Adjusting the Angle of the TV to suit view Using Remote Control Troubleshooting 2 Settings (Type A) 21 Selecting Pictu
ENGLISH IR OUT Using Guide 39 Suitable / Not Recommend remote-controller data format 39 IR Receiver specifications Open Source Software Notice Information Software Download Information Updating Firmware Licenses Regulatory 41 FCC Notice 41 FCC Radio Frequency Interference Requirements (for UNII devices) 41 FCC RF Radiation Exposure Statement 42 Industry Canada Statement 42 IC Radiation Exposure Statement 42 RSS-247 Requirement 43 NOTE TO CABLE/TV INSTALLER 43 WARNING! (STABILITY HAZARD) 43 Symbols 43 LG T
Important Safety Instruction ENGLISH •• Read these instructions. •• Keep these instructions. •• Heed all warnings. •• Follow all instructions. •• Do not use this apparatus near water. •• Clean only with dry cloth. •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning! Safety instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH •• Disconnecting the Device from the Main Power -- The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible. •• Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. •• Outdoor Antenna Grounding (Can differ by country): -- If an outdoor antenna is installed, follow the precautions below.
Preparing •• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. •• Image shown may differ from your TV. •• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• The available menus and options may differ from the input source or product model that you are using. •• New features may be added to this TV in the future.
ENGLISH Optional Extras Lifting and Moving the TV Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies. (Depending upon model) When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
•• Use at least two people to move a large TV. •• When transporting the TV by hand, hold the TV as shown in the following illustration. •• Avoid touching the screen at all times, as this may result in damage to the screen. •• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen. •• Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur.
Using the Kensington Security System (optional) ENGLISH (Depending upon model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. Connect the Kensington security system cable between the TV and a table.
Securing TV to the Wall (TYPE B) ENGLISH 2-Screws for Stand Fixing, 2-Washers for Stand Fixing, 2-Nuts for Stand Fixing (Provided as parts of the product.) (Depending upon model) 1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV.
Mounting on a Wall ENGLISH An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount.
Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. HDMI Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional. •• Make sure not to bend the copper wire of the RF cable.
External Speakers Method of volume control port (Depending upon model) (Depending upon model) •• Cable Spec. ENGLISH Each up/down pins are connected to CPU with pull up resistor respectively. EXTERNAL SPEAKER OUT or GND / UP / DOWN SPEAKER OUT LINE OUT CPU detects transition from 3.3 V to GND level for volume control. AUDIO LINE OUT VOLUME CONTROL Control port for Speaker out + - UP DOWN GND RIGHT LEFT GND : Depending upon model •• Use only with the 3 pole 3.5 mm stereo jack.
Using the Button Network setup (Depending upon model) Wired network connection ENGLISH You can simply operate the TV functions, using the button. This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to the port on the TV.
Adjusting the Menu ENGLISH (Depending upon model) When the TV is turned on, press the button one time. You can adjust the Menu items using the button. Turns the power off. Changes the input source. Scrolls through the saved channels. Adjusting the Angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ Adjusts the volume level. (Depending upon model) •• When adjusting the angle of the product, watch out for your fingers.
(TYPE A) (For series of LN340C, LN340H) * To use the button, press and hold for more than 3 seconds. ENGLISH (Power) Turns the TV on or off. Returns to the last TV channel. Activates or deactivates the subtitles. Shows information on the current program. Resizes an image. (Input) Changes the input source. Number button Enters numbers. (Dash) Inserts a dash between numbers such as 2-1 and 2-2. Accesses the saved channel list. Alternates between the two last channels selected (pressing repeatedly).
(TYPE B) (For series of LN560H, LN570H) ENGLISH (Power) Turns the TV on or off. Accesses the Smart menu. Selects the remote’s operating mode: TV. Selects the remote’s operating mode: DVD. Changes the input source. Turns the TV off in a set amount of time. Number button Enters numbers. (Dash) Inserts a dash between numbers such as 2-1 and 2-2. (Space) Not functional. Tunes to the last channel or input viewed. Adjusts the volume level. Not functional. Selects a closed caption. Enables VD function.
•• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. •• Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. •• This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
ENGLISH •• Abnormal Display -- If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
Adjusting the Brightness of a Picture •• For series of LN340C, LN340H (Depending upon model) (Settings) [Picture] [Advanced Settings] [Brightness] Adjust the brightness of the entire screen. •• [Panel Brightness] Controls the level of screen brightness by adjusting the backlight. •• [Adjust Contrast] Adjusts the contrast of the bright and dark areas of the picture. •• [Black Level] Adjusts the brightness of dark areas of the screen.
ENGLISH Settings (Type B) Adjusting the Brightness of a Picture •• For series of LN560H, LN570H (Depending upon model) [Picture] [Advanced Settings] [Brightness] Adjust the brightness of the entire screen. •• [Panel Brightness] Controls the level of screen brightness by adjusting the backlight. •• [Adjust Contrast] Adjusts the contrast of the bright and dark areas of the picture. •• [Black Level] Adjusts the brightness of dark areas of the screen.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Television system Channel coverage (Band) External antenna impedance Operating Temperature Operating Humidity Storage Temperature Storage Humidity ENGLISH Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).
HDMI (PC) supported mode Resolution ENGLISH 640 x 350 720 x 400 640 x 480 800 x 600 1024 x 768 1360 x 768 1152 x 864 1280 x 1024 1920 x 1080 Horizontal Vertical Frequency (kHz) Frequency (Hz) 31.46 70.09 31.46 70.08 31.46 59.94 37.87 60.31 48.36 60.00 47.71 60.01 54.34 60.05 63.98 60.02 67.50 60.00 HDMI (DTV) supported mode Resolution 640 x 480p 720 x 480p 720 x 576p 1280 x 720p 1920 x 1080i 1920 x 1080p 24 Horizontal Vertical Frequency (kHz) Frequency (Hz) 31.46 59.94 31.50 60.00 31.46 59.94 31.
Supported Audio Formats File Format .wav (Bit rate) (Sample freq.) 8 kHz ~ 96 kHz (Support) PCM (channels) mono, stereo .ogg (Bit rate) 64 Kbps - 320 Kbps (Sample freq.) 8 kHz ~ 48 kHz (Support) Vorbis (channels) mono, stereo .wma (Bit rate) 128 Kbps ~ 320 Kbps (Sample freq.) 8 kHz ~ 48 kHz (Support) WMA (channels) up to 6 ch .flac (Bit rate) (Sample freq.) 8 kHz ~ 96 kHz (Support) FLAC (channels) mono, stereo Extension .asf .
Key Codes (TYPE A) * This feature is not available for all models. ENGLISH Code (Hexa) Function 00 / 01 / Code (Hexa) Function 45 4C (Dash) / 02 4D 03 52 06 5B 07 61 (Blue) 08 (Power) 63 (Yellow) 09 (Mute) 71 (Green) 0B (Input) 72 (Red) 0E 79 0F 10 - 19 7C Number Key 0 - 9 1A 8F 1E 91 28 AA 39 B0 40 B1 41 BA 43 (Home) 8E (Settings) / AB 44 •• Key code 4C (0 x 4C) is available on ATSC/ISDB models which use major/minor channel.
Key Codes (TYPE B) * This feature is not available for all models. Function Code (Hexa) Function 00 C0 (Green) 01 C1 (Red) 02 C2 (Yellow) 03 C3 (Blue) 06 8E 07 8F 08 (Power) B0 09 10 - 19 28 B1 Number Key 0 - 9, (Back) (Space) BA AA 39 AB 40 7C 41 7E 43 DC 44 60 0B 61 0C 71 0E 72 1A 63 4C 5B ENGLISH Code (Hexa) (Dash) 91 - •• Key code 4C (0 x 4C) is available on ATSC/ISDB models which use major/minor channel.
External Control Device Setup (Depending upon model) •• You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. (PC) RS-232C Setup * For other models, connect to the USB port. * The connection interface may differ from your TV.
RS-232C Configurations Communication Parameters RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS TV 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS TV 2 1 4 3 RXD TXD GND IR-OUT •• Baud rate: 9,600 bps (UART) •• Data length: 8 bits •• Parity: None •• Stop bit: 1 bit •• Communication code: ASCII code •• Use a crossed (reverse) cable. ENGLISH 7-Wire Configurations (Standard RS-232C cable) Set ID For Set ID number, see “Real data mapping”.
Command Reference List (Depending upon model) ENGLISH Command1 Command2 1 Power k a Data (Hexadecimal) 00 to 01 2 Aspect Ratio k c (page 31) 3 Screen Mute k d (page 32) 4 Volume Mute k e 00 to 01 5 Volume Control k f 00 to 64 6 Contrast k g 00 to 64 7 Brightness k h 00 to 64 8 Color k i 00 to 64 9 Tint k j 00 to 64 10 Sharpness k k 00 to 32 11 OSD Select k l 00 to 01 12 Remote Control Lock Mode k m 00 to 01 13 Balance k t 00 to 64 14 Color Temperature
Transmission / Receiving Protocol 1 Power (Command: k a) (Depending upon Model) ►►To control Power On/Off of the set. (Command1)(Command2)( )(Set ID)( )(Data)(Cr) (Command1): First command to control the TV. (j, k, m or x) (Command2): Second command to control the TV. (Set ID): You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ►►To select screen mute on/off. ►►To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission ENGLISH (k)(d)( )(Set ID)( )(Data)(Cr) Transmission (k)(g)( )(Set ID)( )(Data)(Cr) Data 00: Screen mute off (Picture on) / Video mute off Data 01: Screen mute on (Picture off) Data 10: Video mute on Data Min: 00 to Max: 64 * Refer to “Real data mapping”.
12 Remote Control Lock Mode (Command: k m) ►►To adjust the screen tint. You can also adjust tint in the picture settings. ►►To lock the front panel controls on the monitor and remote control. Transmission Transmission (k)(j)( )(Set ID)( )(Data)(Cr) (k)(m)( )(Set ID)( )(Data)(Cr) Data Red: 00 to Green: 64 * Refer to “Real data mapping”. Data 00: Off Data 01: On Ack Ack (j)( )(Set ID)( )(OK/NG)(Data)(x) 10 Sharpness (Command: k k) ►►To adjust the screen sharpness.
15 Energy Saving (Command: j q) 17 Equalizer (Command: j v) ►►To reduce the power consumption of the TV. You can also adjust Energy Saving in picture settings. ►►To adjust equalizer.
18 Tune Command (Command: m a) 19 Channel Skip / Add (Command: m b) ►►Select channel to following physical number. ►►To set skip status for the current Channel. Transmission Transmission Data 00: High channel data Data 01: Low channel data ex. No. 47 00 2F (2FH) No. 394 01 8A (18AH), DTV No.
23 Channel block/unblock (Command: m d) 22 Input select (Command: x b) (Main Picture Input) ►►This command may work differently depending upon model and signal. ►►To select input source for main picture.
(For all other regions including Colombia, Excluding the above countries) 24 Fail Over Mode (Command: m i) Transmission Transmission (Data 00): Physical Channel Number (Data 01)(Data 02): Channel Data -- (Data 01): High Channel data -- (Data 02): Low Channel data 00 00 ~ 27 0F (Decimal: 0 ~ 9999) (Data 03): Input Source -- 10: Antenna TV (DTV) -- 20: Antenna Radio (Radio) -- 40: Satellite TV (SDTV) -- 50: Satellite Radio (S-Radio) -- 90: Cable TV (CADTV) -- a0: Cable Radio (CA-Radio) (Data 04): block(01
26 Internal storage media contents play (Command: s n, a8) ►►Plays media stored in the internal memory. * Real data mapping 00: Step 0 ENGLISH ►►This command may work differently depending upon model and signal.
IR OUT Using Guide (except for 32LN340CBUD) ENGLISH Suitable / Not Recommend remote-controller data format Item Data format code Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Suitable Data Format Not Recommend Data Format Single: Enable Repeat: Enable Single: Enable Repeat: Disable Single: Disable Repeat: Disable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format IR Receiver spe
Open Source Software Notice Information ENGLISH To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents, please visit https://opensource.lge.com.
Regulatory (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ENGLISH Industry Canada Statement RSS-247 Requirement (For Canada) [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE TO CABLE/TV INSTALLER Refers to alternating current (AC). Refers to direct current (DC). ENGLISH (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Symbols Refers to class II equipment.
ENGLISH 44
ENGLISH 45
ENGLISH 46
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. LG Customer Information Center For inquires or comments, visit www.lg.
