Installation Manual
Table Of Contents
- INSTALLATION MENU
- PUBLIC DISPLAY SETTINGS
- TV MANAGER
- GENERAL
- KEY CODES
- Customizable Portal
- EXTERNAL CONTROL DEVICE SETUP
- TRANSMISSION / RECEIVING PROTOCOL
Aux Source Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When Aux Source
Setting is set to On (Work), the RJP or HDMI-CEC / HTNG will not operate
• Available Input Source List
• Decide whether selected Input Source is set to On (Enable) or Off (Disable).
• User cannot disable the current input’s Aux Source Setting.
Factory Reset
Factory reset returns all the parameters to the default settings.
1 Press Enter key to proceed factory reset. and confirmation message window will be shown.
2 When select YES, all television settings except UTT value should write to the default settings.
10
ENGLISH