Installation Manual

Download Boot Logo
Make a ‘LG_DTV’ folder on the USB flash drive and then copy the splash image file to that folder.
* Image shown may differ from your TV.
AV
(RGB)
/DVI IN
1 2
COMPONENT
IN
RGB IN (PC)
SPEAKER
OUT
ANTENNA/
CABLE IN
OPTICAL
AUDIO OUT
AUDIO IN
(COMPONENT/RGB/DVI)
RS-232C IN
(CONTROL & SERVICE)
H/P OUT
IN 3 USB IN
PCMCIA CARD SLOT
1 Connect the USB device to the USB IN jack on the TV.
2 Use the button to select the TV Manager option and then press the OK button.
3 Use the button to select the USB and Download Boot Logo and press the OK button.
4 Use the button to select the desired file name and press the OK button.
NOTE
• Splash Image update function supports only JPEG format file of less than 1 MB file size.
• Except for JPEG images with progressive encoding.
• We recommend you that splash image resolution match the TV`s panel resolution.
• Max resolution of splash image : Full HD → 1920 x 1080, HD → 1360 x 768.
• Min resolution of splash image : Full HD → 64 x 64, HD → 64 x 64.
• TV keep splash image until you change a new splash image.
• Please do not use the ampersand character(&) and the left angle bracket (<) in the file name to use DZM file
on EZ Download.
• Non-standard photo/image file may not be displayed.
16
ENGLISH