Installation Manual
Table Of Contents
- INSTALLATION MENU
- PUBLIC DISPLAY SETTINGS
- TV MANAGER
- GENERAL
- KEY CODES
- Customizable Portal
- EXTERNAL CONTROL DEVICE SETUP
- TRANSMISSION / RECEIVING PROTOCOL
External Speaker
(Depending on model)
1 Go to General → External Speaker.
(1) Volume Control
• Selects the volume control method of an external speaker. You can choose either Off/Int Variable or
Fixed.
(1) Output
• This item is enabled when Volume Control is set to Fixed. You can choose one of 7 steps.
(0.01/0.03/0.05/0.1/0.2/0.5/1 Watts)
• Some models can choose one of 9 steps. (0.01/0.03/0.05/0.1/0.2/0.5/1/1.5/2 Watts)
NOTE
• Optical supported models :
- If You set External Speaker as Variable Output Mode, User cannot select External Speaker(Optical) in
Sound-Out menu.
• Headphone supported models :
- External Speaker and Headphone can not be used simultaneously.
- Disconnect Headphone to use External Speaker. External Speaker only works when Headphone is
disconnected.
23
ENGLISH