Installation Manual
Table Of Contents
- INSTALLATION MENU
- PUBLIC DISPLAY SETTINGS
- TV MANAGER
- GENERAL
- KEY CODES
- Customizable Portal
- EXTERNAL CONTROL DEVICE SETUP
- TRANSMISSION / RECEIVING PROTOCOL
Speaker Output Setup
* Depending upon model
• Connect the external speaker to the external speaker out jack on the TV.
EXTERNAL
SPEAKER OUT
VOLUME
CONTROL
+
-
STEREO 8
UP
DOWN
Control port for Speaker out
RIGHT
LEFT
GND
GND
: Depending upon model
or
NOTE
• External speaker must be used three plug(SE : Single Ended, Stereo) as shown in the drawings and
external speaker fully inserted with external Speaker Jack.
• Otherwise it will cause defect.
• Use only with the 3 Pole 3.5 mm Stereo Jack.
• Do not connect your headphones or earphones to the port for connecting an external speaker.
Method of Volume control port
* Depending upon model
• Cable Spec.
GND / Up / Down
• Each Up / Down pin is pulled to 3.3 V with CPU GPIO.
• CPU detects transition from 3.3 V to GND level for volume control.
24
ENGLISH