Installation Manual

Communication Parameters
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command reference list
* (Depending on model)
COMMAND1 COMMAND2 DATA (Hexadecimal)
1 Power k a 00 to 01
2 Aspect Ratio k c (page 42)
3 Screen Mute k d (page 42)
4 Volume Mute k e 00 to 01
5 Volume Control k f 00 to 64
6 Contrast k g 00 to 64
7 Brightness k h 00 to 64
8 Color k i 00 to 64
9 Tint k j 00 to 64
10 Sharpness k k 00 to 32
11 OSD Select k l 00 to 01
12 Remote Control Lock Mode k m 00 to 01
13 Treble k r 00 to 64
14 Bass k s 00 to 64
15 Balance k t 00 to 64
16 Color Temperature x u 00 to 64
17 Equalizer j v (page 44)
18 Energy Saving j q 00 to 05
19 Tune Command m a (page 44)
20 Channel Skip/Add m b 00 to 01
21 Key m c Key Codes
22 Control Backlight m g 00 to 64
23 Input select x b (page 47)
24 Auto Configure j u (page 47)
• During playing media, all commands except Power (ka) and Key (mc) are not executed and treated as NG.
With RS-232C cable, TV can communicate “ka command” in power-on or power-off status. But with USB-to-
Serial converter cable, the command works only if TV is on.
40
ENGLISH