Installation Manual
Table Of Contents
- INSTALLATION MENU
- PUBLIC DISPLAY SETTINGS
- TV MANAGER
- GENERAL
- KEY CODES
- Customizable Portal
- EXTERNAL CONTROL DEVICE SETUP
- TRANSMISSION / RECEIVING PROTOCOL
Key Operation
• Manage key usability of Local(Front) Key and Remote Control. When selected to On, following IR Operation
and Local Key Operation will be worked by below.
IR Operation
Decide whether work the LG remote control or not.
• Able to set Normal, Use PWR Only, Block All
• When IR Operation is set to Block All, all normal remote keys don’t work. Use PWR Only (Block
except power) makes block all remote keys except power key.
• Although IR Operation value is Use PWR Only or Block All. It can work in service mode. (In-Start,
In-Stop, Power-Only, ADJ, Hotel-Mode, Hotel-Mode-Ready, P-Check, S-check, In-Time, FMode-
Init, FMode-Start, FMode-AV, FMode-F1)
• Menu key action to enter the installation menu and key action with special menu(In-Start / EZ-
Adjust …) are still available.
• When IR Operation is set to Normal (Work), all remote keys are available.
Local Key Operation
Decide to operate Local/Front Key working behavior by setting Local Key Operation as Normal,
Use PWR Only, Block All
• When Local Key Operation is set to Block All, all local keys don’t work. (If value is Use PWR Only,
it blocks all local keys except power key.)
• When Local Key Operation is set to Normal, all local key are available.
Exception)
In case of power off condition with all key are blocked, Power On Status value turns to PWR, and
disabled status to fix value for power on operation. (fool-proof routine)
6
ENGLISH