Installation Manual
Table Of Contents
- INSTALLATION MENU
- PUBLIC DISPLAY SETTINGS
- TV MANAGER
- GENERAL
- KEY CODES
- Customizable Portal
- EXTERNAL CONTROL DEVICE SETUP
- TRANSMISSION / RECEIVING PROTOCOL
Menu Display
Function to decide whether work with menu (including relevant menus too) of control key (On –
Enter possible) or not (Off – Enter Impossible).
• Although select Off (Enter impossible), the action that press a Menu button for 5 seconds to
enter installation menu is available.
• When select On (Enter possible), Menu works.
OSD Display
Decide to display OSD or not by setting OSD Display as On (Display) or Off (Do not Display).
• When OSD Display is set to Off (Do not Display), all OSD is not displayed except some exception.
• Although select Off (Do not Display), the action that press a menu button for 5 seconds to
enter installation menu and entering service menu are available. (In-Start, Power-Only, Adjust,
Installation Menu …)
System Provider Mode
System Provider Mode allows access to the menu system from the front panel or remote control
but access is controlled as follows:
• When value is On, Accessible Items on the menu system, others are not permissible.
- Input select screens
- Sleep Timer
- Aspect Ratio
- Closed Caption
- Safety / My Media / About This TV
• Q.menu, which is related to Channels of User Menu, is not accessible.
• If the channel map is empty, Auto-tuning guide dialog should be blocked by pressing List, Fav,
CH+ (Page up), CH- (Page down) keys.
Power Management
The Power Management feature will turn off the television receiver if no input control command is received
from either the Local or IR Key within a selected hours.
• Activity on either of these inputs shall restart the Power Management timer and check key time interval
again.
• This entry can be set to a value which is corresponding to the desired hours (1 to 7).
• Default value is Off (disabled).
• TV should off and on after apply this setting.
DTV Channel Update
It is a mode to set whether to update DTV channel information automatically or not.
• When DTV Channel Update is set to Auto, the function to update TV’s channel map according to DTV
channel’s stream information
• DTV Channel Update is set to Manual, the function to keep TV’s channel map even though DTV channel’s
information is changed.
8
ENGLISH