OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. LT38** LT64** LT66** LT74** LT76** www.lg.
TABLE OF CONTENTS ENG ENGLISH TABLE OF CONTENTS 3 LICENSES 26 MAINTENANCE 3 OPEN SOURCE SOFTWARE NOTICE 26 26 26 4 INSTALLATION PROCEDURE 26 TROUBLESHOOTING 4 ASSEMBLING AND PREPARING 27 CAUTION FOR USING EZSIGN 4 6 7 8 9 9 11 12 14 15 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall Tidying cables How to use Dual Lock™ 16 MAKING CONNECTIONS 16 16 17 17 18 19 19 19 19 20 20 20 21 21 22 C
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENG ENGLISH NOTE Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are yy using. New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 5 ENERGY AV MODE INPUT TV SAVING 2 4 5 7 8 9 0 FLASHBK LIST 3 6 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote control, Batteries (AAA) (See p.23, 24, 25) EzSign Editor CD (Only LT640E) or Owner’s manual Power Cord Holder (Only 32/37/42/47LT64**, 32/37/42/47LT66**, 32/37/42/47LT38**, 32/37/42/47LT74**, 32/37/42/47LT76**) (See p.14) Stand Screws 4 EA, M4 x 12 2 EA, M4 x 16 (Only 22LT64**, 22LT38**) (See p.
ASSEMBLING AND PREPARING Separate purchase ENG ENGLISH Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING 7 ENGLISH ENG Parts and buttons (Only 32/37/42/47LT64**, 32/37/42/47LT66**, 32/37/42/47LT38**, 32/37/42/47LT74**, 32/37/42/47LT76**) Screen IN 3 (Only 22/26LT64**, 26LT66**, 22/26LT38**, 26LT769*) Remote control sensor Speakers Power Indicator (Can be adjusted using the Power Indicator in the OPTION -menu.) Clock LED Stand (Only LT64**, LT66**, LT38**, LT74**, LT760*) (Only LT64**, LT66**, LT74**, LT760*) Button ∧∨ Description Scrolls through the saved programmes.
ASSEMBLING AND PREPARING ENG ENGLISH Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should yy be at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION Avoid touching the screen at all times, as this yy may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall.
ASSEMBLING AND PREPARING ENG ENGLISH (Only 32/37/42/47LT64**, 32/37/42/47LT66**, 32/37/42/47LT38**, 32/37/42/47LT74**, 32/37/42/47LT760*) 1 3 M4 x 14 4 EA Stand Body M4X20 Front Stand Base Top View M4 x 14 4 EA 2 CAUTION When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Make sure that the screws are fastened yy completely.
ASSEMBLING AND PREPARING Securing the TV to a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.
ASSEMBLING AND PREPARING ENG ENGLISH Securing the TV to a wall (This feature is not available for all models.) Using the Kensington security system (This feature is not available for all models.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.
ASSEMBLING AND PREPARING Separate purchase (Wall Mounting Bracket) Model 22/26LT64**, 22/26LT38**, 26LT66** 26LT76** VESA Standard screw Number of screws Wall mount bracket 100 x 100 M4 4 LSW100B(G) Model 37/42LT64**, 37/42LT66**, 37/42LT38**, 37/42LT74**, 37/42LT76** VESA Standard screw Number of screws Wall mount bracket Model VESA Standard screw 200 x 200 M6 4 LSW200B(G) 47LT64**, 47LT66**, 47LT38**, 47LT74**, 47LT76** 400 x 400 M6 Number of screws 4 Wall mount bracket LSW420BX A B 32LT64
ASSEMBLING AND PREPARING ENG ENGLISH Not using the DESK-TYPE STAND (Only 32/37/42/47LT64**, 32/37/42/47LT66**, 32/37/42/47LT38**, 32/37/42/47LT74**, 32/37/42/47LT76**) Image shown may differ from your TV. When installing the wall mounting bracket, use the Protection cover. Insert the Protection cover into the TV until clicking sound. Tidying cables (Only 32/37/42/47LT64**, 32/37/42/47LT66**, 32/37/42/47LT38**, 32/37/42/47LT74**, 32/37/42/47LT76**) 1 Install the Power Cord Holder and Power Cord.
ASSEMBLING AND PREPARING (This feature is not available for all models.) Fix the set-top box to the TV and use it when you want to. 1 After removing the protection paper from the Dual Lock, stick it to the TV and the set-top box as shown. Dual Lock™ 2 Attach the set-top box to the TV by pressing the Velcro strips together. NOTE Please make sure no foreign substances yy exist on the surface of the product, and then firmly attach the Dual Lock.
ENG ENGLISH BLE MAKING CONNECTIONS MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the 32LT66** models. Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS HDMI connection (Only 26/32/37/42/47LT76**) 3 DVD/ Blu-Ray / HD Cable Box / HD STB / PC 2 ARC (Audio Return Channel) An external audio device that supports yy SIMPLINK and ARC must be connected using HDMI/DVI IN 1 (ARC) port. When connected with a high-speed HDMI yy cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function.
MAKING CONNECTIONS ENG ENGLISH DVI to HDMI connection (Only LT769*) Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustrations. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS Network Setup (Only LT64**, LT66**, LT38**, LT74**, LT760*) Transmits the video signal from PC to the TV. To transmit an audio signal, connect an audio cable. (Only LT74**, LT76**) Wired Network Connection This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication. (Image shown may differ from your TV.
MAKING CONNECTIONS ENG ENGLISH Audio connection Speaker output SETUP (Only 32/37/42/47LT64**, 32/37/42/47LT66**, 32/37/42/47LT38**, 32/37/42/47LT74**, 32/37/42/47LT76**) You may use an optional external audio system instead of the built-in speaker. NOTE Connect the external speaker to the Speaker output(STEREO) jack on the TV.
MAKING CONNECTIONS 21 Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV. (*Not Provided) USB IN ▼PCMCIA CARD SLOT▼ (Only LT64**, LT66**, LT38**, LT74**) USB (*Not Provided) USB IN (Only LT76**) USB IN View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. (*Not Provided) (*Not Provided) NOTE yyTo use a USB Hub device, make sure that it is connected to the USB IN 1 (HUB) port.
MAKING CONNECTIONS ENG ENGLISH Euro Scart connection Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the Euro Scart cable as shown on the following illustration. To display images by using progressive scan, make sure to use the Euro Scart cable.
REMOTE CONTROL 23 ENGLISH ENG REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL ENG ENGLISH (Only LT64**, LT66**, LT76**) Number buttons Enters numbers. Turns the TV on or off. LIST Accesses the saved programme list. ꕊ ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption. ENERGY AV MODE Selects an AV mode. AV MODE TV/ RAD SAVING INPUT Changes the input source. TV/RAD Selects Radio, TV and DTV programme. GUIDE - Shows programme guide. (Only LT640H, LT660H, LT760H) - Shows Contents List in EzSign mode.
REMOTE CONTROL 25 ENGLISH ENG (Only LT74**) Number buttons Enters numbers. Turns the TV on or off. ꕊ ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption. ENERGY AV MODE LIST Accesses the saved programme list. INPUT AV MODE Selects an AV mode. SAVING 1.,;@ 2 abc 3 def INPUT Changes the input source. 0 [ LIST PORTAL Displays and removes hotel interactive menu. CHAR/NUM Shifts the Character or Number. Q.
MAINTENANCE / TROUBLESHOOTING MAINTENANCE ENG ENGLISH Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall yy outlet to prevent possible damage from lightning or power surges.
CAUTION FOR USING EZSIGN 27 Only 22/26/32/37/42/47LT640E Do not remove a USB drive while data is being copied. It can corrupt the data and EzSign may not work yy properly. While loading a USB device or dongle, your TV may function slower than normal. yy Some user-created subtitles may not work properly. yy Some special characters are not supported in subtitles. yy HTML tags are not supported in subtitles. yy Subtitles in languages other than the supported languages are not available.
SPECIFICATIONS ENG ENGLISH SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 22LT64** 22LT38** MODELS 22LT640H-ZA 22LT640E-ZA 22LT380H-ZA Dimensions With stand(mm) (W x H x D) Without stand(mm) 516.6 x 385.7 x 192.0 516.6 x 385.7 x 192.0 516.6 x 332.2 x 41.6 516.6 x 332.2 x 41.6 3.7 3.7 Weight With stand(kg) Without stand(kg) 3.1 3.
SPECIFICATIONS 29 37LT66** 37LT38** 37LT640H-ZA 37LT640E-ZA 37LT660H-ZA 37LT380H-ZA Dimensions With stand(mm) (W x H x D) Without stand(mm) 867.3 x 592.8 x 231.9 867.3 x 592.8 x 231.9 867.3 x 592.8 x 231.9 867.3 x 532.8 x 68.6 867.3 x 532.8 x 68.6 867.3 x 532.8 x 68.6 Weight With stand(kg) 11.2 11.2 11.2 Without stand(kg) 10.0 10.0 10.
SPECIFICATIONS ENG ENGLISH 47LT74** 47LT66** 47LT38** 47LT740H-ZA 47LT660H-ZA 47LT380H-ZA 1101.0 x 728.5 x 273.1 1101.0 x 728.5 x 273.1 1101.0 x 728.5 x 273.1 1101.0 x 665.4 x 54.5 1101.0 x 665.4 x 54.5 1101.0 x 665.4 x 54.5 With stand(kg) 17.3 17.3 17.3 Without stand(kg) 15.3 15.3 15.
SPECIFICATIONS Wireless LAN module(TWFM-B003D) specification Standard IEEE802.11a/b/g/n Frequency Range 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) Modulation CCK / OFDM / MIMO Output Power (Typical) 802.11a: 11 dBm 802.11b: 15 dBm 802.11g: 13 dBm 802.11n - 2.4GHz: 13 dBm 802.11n - 5GHz: 13 dBm Data rate 802.11a/g: 54 Mbps 802.11b: 11 Mbps 802.11n: 300 Mbps Antenna Gain (Typical) 2400 to 2483.5 MHz: -2.5dBi 5150 to 5250 MHz: -2.2dBi 5725 to 5850 MHz: -2.
SPECIFICATIONS ENG ENGLISH Component port connecting information HDMI/DVI-DTV supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720x480 31.469 31.5 59.94 60 720x576 31.25 50 1280x720 37.5 44.96 45 50 59.94 60 33.72 33.75 28.125 26.97 27 33.716 33.75 56.25 67.43 67.5 59.94 60 50 23.97 24 29.976 30.00 50 59.94 60 1920x1080 RGB-PC, HDMI/DVI-PC supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720x400 31.468 70.08 640x480 31.
IR CODES This feature is not available for all models. yy Code (Hexa) 08 95 30 0B F0 10-19 53 1A 02 Function Note (POWER) ENERGY SAVING Remote control Button (Power On/Off) AV MODE INPUT TV/RAD Number Key 0-9 LIST Q.
EXTERNAL CONTROL DEVICE SETUP ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP RS-232C Setup RS-232C Configurations Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
EXTERNAL CONTROL DEVICE SETUP 35 Baud rate: 9600 bps (UART) yy Data length: 8 bits yy Parity : None yy ENGLISH ENG Communication Parameters Stop bit: 1 bit yy Communication code: ASCII code yy Use a crossed (reverse) cable. yy Command reference list (Depending on model) 01. Power k 02. Aspect Ratio k 03. Screen Mute k a c d DATA (Hexadecimal) 00 to 01 (See p.37) (See p.37) 04. Volume Mute k e 00 to 01 05. Volume Control k f 00 to 64 06. Contrast k g 00 to 64 07.
EXTERNAL CONTROL DEVICE SETUP ENG ENGLISH Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] [Command 2] [Set ID] : First command to control the TV.(j, k, m or x) : Second command to control the TV. : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
EXTERNAL CONTROL DEVICE SETUP 37 04. Volume Mute (Command: k e) ►► To control Power On/Off of the set. ►► To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To show Power On/Off.
EXTERNAL CONTROL DEVICE SETUP ENG ENGLISH 09. Tint (Command: k j) 13. Treble (Command: k r) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping’. See p.40. (Only LT64**, LT66**, LT38**, LT74**) ►► To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.40.
EXTERNAL CONTROL DEVICE SETUP 19. Tune Command (Command: m a) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. ►► Select channel to following physical number.
EXTERNAL CONTROL DEVICE SETUP ENG ENGLISH 23. Input select (Command: x b) (Main Picture Input) ►► To select input source for main picture.
or The model and serial numbers of the TV is located on the back of the TV Record it below should you ever need service.
