INSTALLATION MANUAL LED TV Please read this manual carefully before operating your set and retain it for future reference. LV3***-U* LV5***-U www.lg.
ENGLISH TABLE OF CONTENT INSTALLATION MENU ���������������������������� 3 PUBLIC DISPLAY SETTINGS ������������������� 4 TV MANAGER ����������������������������������������12 -1.
ENGLISH INSTALLATION MENU Introduction The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’. The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. • Image shown may differ from your TV. Installation Menu (V 3.
ENGLISH Public Display Settings • Image shown may differ from your TV. Public Display Settings (V 3.0) Installation Menu (V 3.0) ▲ Public PublicDisplay DisplayMode Settings TV Manager Password Change Set ID Setup Configuration Setup Time Scheduler Lock Mode External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.
ENGLISH (3) Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100) • Decide to apply volume policy of ‘Start Volume’, ‘Maximum Volume’ and ‘Minimum Volume’ as Yes(Work) or No(Do Not Work). (3-1) Start Volume This entry sets the start volume level when is power on. • The level is specified as a number between minimum volume to maximum value. (Min ≤ Start ≤ Max) • The default setting is ‘Off’ (disabled).
ENGLISH (4-2) Local Key Operation Decide to operate ‘Local/Front Key’ working behavior by setting ‘Local Key Operation’ as Normal, Block All. (* 40LV3**H series use Normal, Use PWR Only, Block All.) • When ‘Local Key Operation’ is set to Block All, all local keys don’t work. (If value is Use PWR Only, it blocks all local keys except power key.) • When ‘Local Key Operation’ is set to Normal, all local key are available.
ENGLISH (5-3) Channel Change Decide to change channel or not by setting ‘Channel Change’ as ‘Yes’(Change Possible) or ‘No’(Change Impossible) when present source is TV. • When ‘Channel Change’ is set to No (Change Impossible) --Channel Key, Numeral Key, List Key, Q.View Key don’t work and entering ‘Channel Menu’ in the Main Menu OSD is impossible. --‘Channel’ item in ‘On Time’ menu will be fixed. --Entering ‘Setup Menu’ in the ‘Main Menu’ OSD is impossible regardless of ‘Setup Menu’ item.
ENGLISH (6) Power Management The Power Management feature will turn off the television receiver if no input control command is received from either the Local or IR Key within a selected hours. • Activity on either of these inputs shall restart the ‘Power Management’ timer and check key time interval again. • This entry can be set to a value which is corresponding to the desired hours (1 to 7). • Default value is ‘Off(disabled)’. • TV should off and on after apply this setting.
ENGLISH (8-3) Major Select major part of start channel number if Input source value is TV. (in case of ATV, it means physical channel number.) (8-4) Minor Select minor part of start channel number if Input source value is TV. (8-5) A/V Setting If ‘A/V Setting’ is changed from ‘No’ to ‘Yes’, parameters that are set before entering ‘Installation Menu’ are applied whenever turn on power. • Following Parameters are applied to basic.
ENGLISH (9) Aux Source Setting The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When ‘Aux Source Setting’ is set to Yes(Work), the RJP or HDMI-CEC / HTNG will not operate (9-1) Input Source • Available Input Source List (9-2) Setting • Decide whether selected ‘Input Source’ is usable (Enable) or not (Disable). • User cannot disable the current input’s ‘Aux Source Setting’. (10) Factory Reset Factory reset returns all the parameters to the default settings.
Item Public Display Settings Power On Status Volume Start Volume Maximum Volume Minimum Volume Key Operation IR Operation Local Key Operation Limited Mode Setup Menu Input Source Change Channel Change Menu Display OSD Display System Provider Mode Power Management DTV Channel Update Power On Default Input Source Tune Mode Major Minor A/V Setting Aspect Ratio Enable Disable Yes No Yes No Off, Minimum Volume ~ Maximum Volume Minimum Volume ~ 100 0 ~ Maximum Volume Yes No Normal / Use PWR Only / Block All Norm
ENGLISH TV Manager 1. USB Ez Download Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL (see Send to USB descriptions for more information regarding file types), Logo Image, etc (TLX, MICOM for Pro:Centric). * Splash images and EPK files should be copied into the folder named LG_DTV on the USB. TLL files should be copied to the root folder of the USB.Insert Image files shoud be copied into the folder named LG_SIG on the USB.
to download either SPI Boot or LG Boot Logo. If you checked the LG Boot Logo checkbox, then the Splash image, if selected, will be unchecked. Also, if you select the LG Boot Logo and proceed with the download, the existing Splash image will be deleted. ENGLISH 5 Select the EPK option (software update) and then use the two dots and three dots buttons Ez Download (USB Port1) [TLL] GlobalClone00001.TLL [LOGO] 1024X768.jpg [EPK] M1A_DVB_CN_RevNo1539_v00.00... [NOSIG] 1360X768.jpg [NOSIG] Insertlmage.
ENGLISH USB Cloning An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Public Display Mode Installation Menu settings, User A/V settings and the Channel Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead.
• Image shown may differ from your TV. ENGLISH Receive From USB 1 Plug USB memory card into the USB port of the TV. 2 Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) Public Display Mode TV Manager Password Change Set ID Setup Configuration Setup Time Scheduler Lock Mode External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 3 Use the OK button to select the USB and Ez Download and press the OK button.
ENGLISH Send To USB • Image shown may differ from your TV. 1 Plug USB memory card into the USB port of the TV. 2 Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) Public Display Mode TV Manager Password Change Set ID Setup Configuration Setup Time Scheduler Lock Mode External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 3 Use the OK button to select the USB and Send to USB and press the OK button.
PCMCIA CARD SLOT Make a ‘LG_DTV’ folder on the USB flash drive and then copy the splash image file to that folder. ENGLISH Logo Image Download • Image shown may differ from your TV. 2 1 Connect the USB device to the USB IN jack on the TV. AV (RGB) IN 3 AUDIO IN OPTICAL MPONENT/RGB/DVI) AUDIO OUT USB IN /DVI IN ANTENNA/ CABLE IN button 2 Use the RS-232C IN (CONTROL & SERVICE) to select the TV Manager option and then press the OK button. Installation Menu (V 3.
ENGLISH 2. Diagnostics Diagnostics Setup Introduction This diagnostic function provides current status information of the TV in XML file format using a USB device. If the user sets a signal standard level, SignalTrace checks the signal strength status of the digital channel that the user tuned to. It checks and records good and bad channel signals, and then provides the signal information to a USB storage device in XML file format. Installation Menu (V 3.
• Go to Installation menu -> TV Manager -> Diagnostics -> Diagnostics Setup • Set the level value in Signal Tracer Set. (Disable, 10 to 90) ENGLISH (3) Saving signal status information of digital channels through SignalTrace in XML format TV Manager USB Diagnostics Setup Diagnostics Setup Signal Tracer Set Diagnostics Previous Previous ◄ Disable ► OK OK • Change the channel and tune to a digital channel, then maintain the status for more than 5 seconds. • Create an empty file named tv_signal.
ENGLISH Password Change • Image shown may differ from your TV. --To ensure more security, Password can be changed by installers’ own design. --The changed password is applied to the ‘extra contents’ password.( *Only for LW340H-UA series) Installation Menu (V 3.0) Public Display Mode TV Manager Password Change Password Change Set ID Setup Configuration Setup Time Scheduler Lock Mode External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.
ENGLISH Set ID Setup Installation Menu (V 3.0) Public Display Mode TV Manager Password Change Set ID Setup Setup Configuration Setup Time Scheduler Lock Mode External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 1 Use the Set ID Setup Set ID Lock Set ID Previous ◄ Yes ► 1 OKOK OK button to select the Set ID Setup. • Set ID Lock --Set the ‘Set ID’ item in ‘Option’ Menu whether to activate or not. --Set to Yes(Work) or No(Do Not Work).
ENGLISH Configuration Setup • Image shown may differ from your TV. Installation Menu (V 3.0) Configuration Setup Public Display Mode TV Manager Password Change Set ID Setup Number of RCU Splash Offset Time Configuration Setup Time Scheduler Lock Mode External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.
• When ‘15Min Auto Off’ is set to ‘Enable’, TV will turn off if there is no signal in 15Min. ENGLISH (5) 15Min Auto Off (6) Auto Sensing • -If ‘Auto Sensing’ is set to ‘ ', the input is automatically switched when the input signal that you set to ‘ON’ is received. • If ‘Auto Sensing’ is set to ‘Disable’, the input is not switched when the input signal is received. • If SIMPLINK is set to On, HDMI is automatically set to Disable and can not work.
ENGLISH Time Scheduler Installation Menu (V 3.0) Public Display Mode TV Manager Password Change Set ID Setup Configuration Setup Time Scheduler scheduler Lock Mode External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 1 Use the Time Scheduler Time Scheduler ◄ On Off Timer Previous OK button to select the Time Scheduler. (1) Time Scheduler • It is a mode to set whether to use or not. • When ‘Time Scheduler’ is set to ‘On’, You can adjust ‘On Timer’, ‘Off Timer’ menu.
ENGLISH Lock Mode Installation Menu (V 3.0) Public Display Mode TV Manager Password Change Set ID Setup Configuration Setup Time scheduler Lock Mode Lock Mode Data Service External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 1 Use the ◄ Enable ► USB Enable Factory Reset Enable Previous OK OK button to select the Lock Mode. • If ‘Lock Mode’ items are disabled, the following features will be unavailable.
ENGLISH External Speaker Installation Menu (V 3.0) Public Display Mode TV Manager Password Change Set ID Setup Configuration Setup Time scheduler Lock Mode External Speaker External Speaker Volume Control Output Previous ◄ Fixed ► 1 Watt OK HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 1 Use the OK button to select the External Speaker. (1) Volume Control • ‘Selects the volume control method of an external speaker. You can choose either Variable or Fixed.
ENGLISH Speaker output SETUP 1 Connect the external speaker to the external speaker out jack on the TV. EXTERNAL SPEAKER OUT GND RIGHT LEFT GND NOTE • External speaker must be used three plug(SE : Single Ended, Stereo) as shown in the drawings and external speaker fully inserted with external Speaker Jack. • Otherwise it will cause defect.
ENGLISH HCEC Setup Installation Menu (V 3.0) Public Display Mode TV Manager Password Change Set ID Setup Configuration Setup Time scheduler Lock Mode External Speaker HCEC Setup CEC Mode S/W : 02.00.00.01 Micom : 0.00.84 1 Use the Default ► No Device ID All StandBy All HTNG HotelMode HCEC Setup Insert Image ◄ IR Decoding Previous No OK OK button to select the HCEC Setup.
• Sets the sending and receiving scenario of the operation about [CEC Op standBy(0x0c) Command(Device Power)]. • The detailed scenario is described on the table below.
ENGLISH INSERT IMAGE • This feature allows you to display an image you have stored on the TV instead of the LG Cube when there is no signal due to DTV signal attenuation, external device failure, or cable removal. Public Display Mode TV manager Password Change Set ID Setup Configuration Setup Time scheduler Lock Mode External Speaker HCEC Setup Insert Image Insert Image Insert Image Mode Enable ► Full Slide Time Previous S/W : 02.00.00.01 Micom : 0.00.
ENGLISH WELCOME VIDEO (Depending upon model) Installation Menu (V 3.0) Public Display Settings TV Manager Password Change Set ID Setup Configuration Setup Time Scheduler Lock Mode HCEC Setup Insert Image Welcome Video S/W : 02.00.00.01 Micom : 0.00.84 Welcome Video Welcome Video Video Reset Previous ◄ Disable ► Confirm OK OK • This feature allows you to download videos via USB storage to display on your TV after your TV boots up and the boot logo appears.
ENGLISH CRESTRON (Depending upon model) • Image shown may differ from your TV. • This function enables synchronization with applications provided by Crestron. Installation Menu (V 3.0) Public Display Settings TV Manager Password Change Set ID Setup Configuration Setup Time Scheduler Lock Mode HCEC Setup Insert Image Welcome Video Crestron Server 0 . 0 . 0 Port 41794 IP ID 3 Previous . 0 OK Crestron S/W : 02.00.00.01 Micom : 0.00.
ENGLISH EXTERNAL CONTROL DEVICE SETUP KEY CODES • This feature is not available for all models. Code (Hexa) 00 01 02 03 06 07 08 09 0B 0E 0F 10 - 19 1A 1E 20 21 28 30 39 CH +, PR + CH -, PR Volume + Volume (Arrow Key / Right Key) (Arrow Key / Left Key) Power Mute Input SLEEP TV, TV/RAD * Number Key 0 - 9 Q.View / Flashback FAV (Favorite Channel) Text (Teletext) T.
ENGLISH EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
1 RS-232C configurations 3-Wire Configurations(Not standard) 5 6 ENGLISH Customer Computer PC RXD 2 2 TXD TXD 3 1 RXD GND 5 3 GND 9 RS-232C (Serial port) TV OR RXD 3 2 TXD TXD 2 1 RXD GND 5 3 GND D-Sub 9 Phone Set ID For Set ID number, see "Real Data Mapping". 1. Press SETTINGS to access the main menus. 2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK. 3. Press the Navigation buttons to scroll to SET ID and press OK. 4.
ENGLISH Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.38) 03. Screen Mute k d (p.38) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08. Color/ Colour k i 00 to 64 04.
ENGLISH Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
ENGLISH 06. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 07.
Transmission [x][u][ ][Set ID][ ][Data][Cr] ENGLISH Data Min : 00 to Max : 32 Ack [k][ ][Set ID][ ][OK/NG][Data][x] Data Min : 00 to Max : 64 Ack [u][ ][Set ID][ ][OK/NG][Data][x] 16. OSD Select (Command: k l) ►► To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on Ack [l][ ][Set ID][ ][OK/NG][Data][x] 17.
ENGLISH ►► Select channel to following physical number.
[Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 04: Low byte Channel Data Data 05 : Input Source (Digital/Satellite for Japan) - 02 : Antenna TV (DTV) - 07 : BS (Broadcasting Satellite) - 08 : CS1 (Communication Satellite 1) - 09 : CS2 (Communication Satellite 2) Data Min : 00 to Max : 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] Control Panel Light (Command: m g) ENGLISH [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data D
ENGLISH 29. Input select (Command: x b) (Main Picture Input) X : don’t care Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV 31. Extended 3D(Command: x v) (only 3D models) (Depending on model) ►► To change 3D option for TV.
►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] ENGLISH 32.