OWNER’S MANUAL Safety and Reference LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Safety instructions Please read these safety precautions carefully before using the product.
Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Des Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
If any of the following occur, unplug the product immediately and contact your local service centre. • The product has been impacted by shock • The product has been damaged • Foreign objects have entered the product • The product produced smoke or a strange smell This may result in fire or electric shock. Be careful in handling the adapter to prevent any external shocks to it. An external shock may cause damage to the adapter. Make sure the power cord is connected securely to the power plug on the TV.
When installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard. We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Only use the specified type of battery. This could cause damage to the remote control. Do not mix new batteries with old batteries.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
Preparing You may find different brightness and color of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.
Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. (Depending on model) LED Clock LEC-003 CAUTION • Avoid touching the screen at all times, as this may result in damage to the screen.
Basic functions Attaching the TV to a desk (Key description is given for mainly joystick) Power On (Features may vary depending on models) joystick button and press it once for few seconds and release it. (However, if the Menu button is one the screen, pressing and holding the joystick button will let you exit the Menu.) Volume Control The TV should be attached to a desk so it cannot be pulled in a forward/ backward direction, potentially causing injury or damaging the product.
Using the kensington security system Adjusting the angle of the TV to suit view (Features may vary depending on models.) (Features may vary depending on models) • Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensington.com. Connect the Kensington security system cable between the TV and a table.
Separate purchase(Wall mounting bracket) 49LW31** 49/55LW34* 49/55LW54** 300 x 300 M6 4 (Only when the item of the following form is provided) (Features may vary depending on models.) Fix the set-top box to the TV and use it when you want to. 1 After removing the protection paper from the Dual LockTM, stick it to the TV and the set-top box as shown. A B Dual Lock™ CAUTION • Otherwise electric shock may occur. • If you install the TV on a ceiling or slanted wall, it may fall and Result in severe injury.
Connections (notifications) Adapter connection (Depending on model) Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE • The external device connection may differ from the model.
NOTE CAUTION • Use only with the 3 Pole 3.5 mm Stereo Jack. • Do not connect your headphones or earphones to the port for connecting an external speaker. Method of Volume control port Other connections (Depending on model) • Cable Spec. Each Up / Down pin is pulled to 3.3 V with CPU GPIO. GND / Up / Down CPU detects transition from 3.3 V to GND level for volume control. Network setup Wired network connection (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port.
Remote control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. 3 ENGLISH 3 To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. 3 4 CAUTION • Do not mix old and new batteries, as this may damage the remote Control.
(Depending on model) C A D B C A Shows programme guide. Displays and removes hotel interactive menu. Views the information of the current programme and (POWER) Adjusts the brightness of the screen to reduce energy consumption. Selects an AV mode. Changes the input source. Selects Radio, TV and DTV programme. Number buttons Enters numbers. Accesses the saved programme list. Returns to the previously viewed programme. B Adjusts the volume level. Accesses your favourite programme list. Resizes an image.
Licenses ENGLISH Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
Specifications CI Module Size1 (W x H x D) Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % ENGLISH 100.0 mm x 55.0 mm x 5.0 mm 1 Only Satellite models.
HDMI/DVI-DTV supported mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.46 31.50 59.94 60.00 720 x 480 31.47 31.50 59.94 60.00 Resolution 720 x 576 31.25 50.00 1280 x 720 37.50 45.00 44.96 50.00 60.00 59.94 1920 x 1080 28.12 33.75 33.72 56.25 67.50 67.43 27.00 26.97 33.75 33.71 50.00 60.00 59.94 50.00 60.00 59.94 24.00 23.97 30.00 29.97 HDMI/DVI-PC supported mode (Use HDMI IN 1 for PC mode) Resolution 1 Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.46 31.
Supported video formats • .asf, .wmv (Only LW30**, LW31**, LW34**,LW540*) [Video] MPEG-4 Part2, XViD, H.264/AVC, VC1(WMV3, WVC1), MP43 [Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3 • .divx, .avi [Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC [Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I, MPEG-1 Layer II, Dolby Digital, MPEG-1 Layer III (MP3) • .ts, .trp, .tp, .mts, .m2ts [Video] H.
Supported photo formats • Category : 2D (jpeg, jpg, jpe) [Available file type] SOF0 : Baseline, SOF1 : Extend Sequential, SOF2 : Progressive [Photo size] Minimum : 64 x 64, Maximum (Normal Type) : 15360 (W) x 8640 (H), Maximum (Progressive Type) : 1920 (W) x 1440 (H) • Category : BMP [Available file type] .
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
LED TV 32LW30** AAA X4 (M4 X L14) www.lg.
1 2 3 1 2 A B 4
ANTENNA/ CABLE IN HDMI IN USB IN H/P OUT PCMCIA CARD SLOT Satellite IN
COMPONENT IN VIDEO/Y PB VIDEO AV IN PR L/MONO AUDIO R AUDIO VIDEO/Y PB PR L/MONO AUDIO R VIDEO L/MONO AUDIO R
HDMI-DVI IN HDMI IN VIDEO/Y PB PR L/MONO AUDIO R AUDIO OUT DVI OUT
DC-IN (19 V ) 4 3 5 2 1 7 8 6 : Depending on model
DC-IN (19 V ) 2 1 : Depending on model
1 2 3 4
0 1 A 2 E D B G1 G2 F A 32LW300C-TA 734 C B C 474 172 D 438 E F 71 F 4.7 19 V 1.6 A G1 G2 4.
* Real data mapping 00 : Step 0 Step 10 (Set ID 10) F: 10 : Step 15 (Set ID 15) Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : 74 : Step 115 Step 116 CF : Step 199 FE : FF : Step 254 Step 255 ENGLISH A: 9
* Real data mapping 00 : Step 0 Step 10 (Set ID 10) F: 10 : Step 15 (Set ID 15) Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : 74 : Step 115 Step 116 CF : Step 199 FE : FF : Step 254 Step 255 ENGLISH A: 9
* Real data mapping 00 : Step 0 Step 10 (Set ID 10) F: 10 : Step 15 (Set ID 15) Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : 74 : Step 115 Step 116 CF : Step 199 FE : FF : Step 254 Step 255 ENGLISH A: 9
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ►► To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu. ►► To adjust treble. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable ►► Adjust EQ of the set.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) 2. Tune to the digital antenna (ATSC) channel 30-3.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] * This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b) ►► To skip current channel(programme) for next time.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * [Data 02], [Data 03] functions depend on model and signal. * If [Data 00] is 00 (3D On), [Data 03] has no meaning. 3) When [Data 00] is 06, 07 00 : Off 01 : On * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.