LED TV LX30** www.lg.
i
1 11 111 22 2 2 1 1 2 33 333 44 4 2
A 2 USB IN IN ANTENNA/ CABLE IN A RS-232C IN (CONTROL & SERVICE)
3 2 3 4 5 1 8 7 6 : Depending on model & country /
4 1 2 : Depending on model & country / 5 1 2 3 4
6
A F E B G1 G2 D C 32LX300C-TA A x B x C (mm) 734 x 474 x 172 A x E x F (mm) 734 x 438 x 71 D (kg) D - ( G1 + 4.7 4.5 G 2 ) (kg) 19 V 1.
OWNER’S MANUAL Safety and Reference LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Safety instructions ENGLISH Please read these safety precautions carefully before using the product.
Des icca nt Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. Dispose of used batteries carefully to ensure that a small child does not consume them. Please seek Doctor- Medical Attention immediately if child consumes batteries. ENGLISH Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed.
CAUTION ENGLISH Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire. Install the product where no radio wave occurs. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. ENGLISH Only use the specified type of battery. This could cause damage to the remote control. Please follow the installation instructions below to prevent the product from overheating. • The distance between the product and the wall should be more than 10 cm. • Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
ENGLISH Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration.
Preparing Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
ENGLISH Separate purchase Lifting and moving the TV Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
Using the joystick button (Image shown may differ from your TV.) NOTE • LX30** series does not have a Joystick button but has only a power On/Off button. • When your finger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and saved programmes. ENGLISH You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Adjusting the angle of the TV to suit view B type ) (This feature is not available for all models.) ENGLISH Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ CAUTION • When adjusting the angle of the product, watch out for your fingers. -- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.
Securing the TV to a wall (This feature is not available for all models.) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall.
• Screw length from outer surface of back cover should be under 8 mm. (Only 28LX53**) Wall mount Pad ENGLISH Back Cover Wall mount Pad Back Cover Standard screw : M4 x L10 Max.8 mm NOTE • Use the screws that are listed on the VESA standard screw specifications. • The wall mount kit includes an installation manual and necessary parts. • The wall mount bracket is not provided. You can obtain additional accessories from your local dealer. • The length of screws may differ depending on the wall mount.
Adapter connection HDMI connection (Depending on model & country) HDMI ULTRA HD deep colour settings CAUTION • Please be sure to connect the TV to the AC-DC power adapter before connecting the TV’s power plug to a wall power outlet. Network connection Wired network connection This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication.
Audio connection Other connections Speaker Output Setup Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. ENGLISH (This feature is not available for all models.) Connect the external speaker to the SPEAKER OUT jack on the TV. Remote control (Depending on model) The descriptions in this manual are based on the buttons on the remote control.
B ENGLISH Accesses your favourite programme list. Shows programme guide. Mutes all sounds. Adjusts the volume level. Scrolls through the saved programmes. Moves to the previous or next screen. A C B 1 D C Teletext buttons ( ) These buttons are used for teletext. Views the information of the current programme and screen. Accesses the main menus. Accesses the Quick menus. Navigation buttons (up/down/left/right) Scrolls through menus or options. Selects menus or options and confirms your input.
Licenses ENGLISH C D 1 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. C Shows programme guide. Displays and removes hotel interactive menu.
Open source software notice information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource. lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Software download information (Only LX530S, LX540S) ENGLISH You can download the SuperSign Software and TV manual from LG Electronics website. Visit https://www.lgecommercial.com/digital-signage/support/download/supersign for Software & https://www.lgecommercial.com/digital-signage/ support/download/supersign for TV manual. Software : SuperSign W_Lite_Server_vX.X.X_Setup.zip SuperSign C_vX.X.X_Setup.zip SuperSign W_Editor_vX.X.X_Setup.zip SuperSign W_Player_vX.X.X_Setup.
HDMI-DTV supported mode RGB-PC, HDMI-PC supported mode Vertical Frequency (Hz) 640 x 480 31.46 31.50 59.94 60.00 720 x 480 31.47 31.50 59.94 60.00 720 x 576 31.25 50.00 1280 x 720 37.50 45.00 44.96 50.00 60.00 59.94 1920 x 1080 28.12 33.75 33.72 56.25 67.50 67.43 27.00 26.97 33.75 33.71 50.00 60.00 59.94 50.00 60.00 59.94 24.00 23.97 30.00 29.97 53.95 54.00 56.25 61.43 67.50 112.50 135.00 135.00 23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00 53.95 54.00 56.25 61.43 67.50 112.50 135.
Supported video formats ENGLISH • Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p) • .asf, .wmv [Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, VC1(WMV3, WVC1), MP43 [Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3 • .divx, .avi [Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC [Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I, MPEG-1 Layer II, Dolby Digital, MPEG-1 Layer III (MP3), *DTS • .ts, .trp, .tp, .mts, .m2ts [Video] H.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
IR codes This feature is not available for all models. Function Note Code (Hexa) Function Note F0 TV/RAD Remote control Button (Power On/Off) Remote control Button 5B EXIT Remote control Button 39 SUBTITLE Remote control Button 44 OK Remote control Button 30 79 0B 10-19 53 1A AV MODE RATIO INPUT Number Key 0-9 LIST Q.
External control device setup ENGLISH RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Type of Connector : D-Sub 9-Pin Male 1 5 Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE 6 • RS-232C connection cables are not supplied with the product. No.
RS-232C Configurations RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 TV 3 2 5 6 4 8 8 7 D-Sub 9 D-Sub 9 ENGLISH 7-Wire Configurations (Standard RS-232C cable) TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 TV 3 2 5 6 4 7 8 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Set ID number. “Real Data Mapping”. 1 Press SETTINGS or HOME to access the main menus.
Communication Parameters ENGLISH • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command Reference List (Depending on Model) COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 12. Remote Control 01. Power k a 00 to 01 02. Aspect Ratio k c (See p. 6) 03. Screen Mute k d (See p. 6) 04. Volume Mute k e 00 to 01 05. Volume Control k f 00 to 64 06.
Transmission / Receiving Protocol Transmission [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
01 Power (Command: k a) ►► To control Power On/Off of the set. 03 Screen Mute (Command: k d) ►► To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Transmission[k][a][ ][Set ID][ ][Data][Cr] ENGLISH Data 00 : Power Off 01 : Power On Data Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On/Off.
07 Brightness (Command: k h) ►► To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] * Refer to Real data mapping. Ack [h][ ][Set ID][ ][OK/NG][Data][x] 08 Colour (Command: k i) ►► To adjust the screen Colour. You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 0 0 to Max : 64 * Refer to Real data mapping.
PowerSavingFunction 7 6 5 4 ENGLISH 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Low Power Low Power Low Power Low Power Low Power Low Power 18 Tune Command (Command: m a) ►► Select channel to following physical number. 3 Level 2 1 0 0 0 0 0 Off 0 0 0 1 Minimum Data 00 : High channel data 0 0 1 0 Medium 0 0 1 1 Maximum Data 01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No.
22 Input select (Command: x b) (Main Picture Input) ►► To select input source for main picture.
