Installation Manual

24
206-4313
Express Script (Cont.)
(Continued from previous page)
If you wish to proceed with the wizard without changing the default values for the Pro:Centric
settings, you can simply select NEXT and press OK on the Installer Remote. Or, if you wish to exit
the wizard while retaining the default values for Pro:Centric settings, use the arrow keys on the
Installer Remote to select DONE, and then press OK.
If you already know the Pro:Centric settings that need to be congured in order for the TV to
connect to the Pro:Centric server and/or if the Pro:Centric server is not yet installed, use the
procedure on the following page to expedite the setup process. Use the Up/Down arrow keys on
the Installer Remote to navigate between the elds.
Note: If you wish to disable the Pro:Centric feature of the TV, select the Data Channel eld, and
then use the Left/Right arrow keys on the Installer Remote to select DISABLED. From here, you
may opt to proceed with the wizard (select NEXT) or save this setting and exit the wizard (select
DONE). See also step 3 below.
PRO:CENTRIC CONFIGURATION
SAVE
BACK
NEXT
DONE
01
X
Pro:Centric Mode
Media Type
Data Channel
<
CONFIGURATION ONLY
>
<
RF >
<
AUTO SEARCH >
PRO:CENTRIC CONFIGURATION
SAVE
BACK
NEXT
DONE
01
X
Pro:Centric Mode
Media Type
Server Address
IP Address
IP Port
255
255
255
255
0
<
CONFIGURATION ONLY
>
<
IP >
<
NUMBER >
Pro:Centric Configuration Screen with
RF Media Fields
Note: By default, the Pro:Centric
Conguration screen initially shows RF
conguration elds.
Pro:Centric Configuration Screen with
IP Media Fields
(Continued on next page)