Installation Manual

28
206-4313
Express Script (Cont.)
(Continued from previous page)
SPEAKER SELECTION
SAVE
BACK
NEXT
BACK
X
04
Select the desired speaker configuration:
^
Pillow Only
TV Only
Pillow & TV
Pillow Speaker Code/Voltage:
^
Zenith (+12v)
Philips (+5v)
RCA (-5v)
4. In the Channel Tuning screen, you have the option to initiate an automated channel scan that
will search for all available digital and analog channels. Select RUN AUTO TUNING and press
OK on the Installer Remote to start the channel scan.
Note: You MUST select RUN AUTO TUNING and press OK in order to run the
channel scan. If you move on to the next step without running Auto Tuning, there
will be no digital or analog channels in the channel lineup. In this case, upon
completion of the Express Script, the only channels in the resulting FTG Channel
Map will be any enabled Aux inputs.
CHANNEL TUNING
SAVE
BACK
SKIP
BACK
X
05
Do you want to scan for available channels?
You MUST select RUN AUTO TUNING and press OK in order to run the channel scan. If you SKIP Auto Tuning, there
will be no digital or analog channels in the channel lineup.
RUNAUTOTUNING
Auto Tuning progress will be shown in a new Channel Tuning screen. The scan typically takes a
few minutes. When the channel scan is complete, the Express Script will automatically advance
to the Edit the Channel Lineup screen. Continue with step 5.
Note: If you do not want to run Auto Tuning, use the arrow keys on the Installer Remote to select
SKIP and press OK.
(Continued on next page)