Installation Manual

206-4313

Reference: Downloading Background Images using a USB Memory

Device

Background images are intended for use with the Bluetooth Sound Sync feature. Once a mobile

device has been paired with the TV, guests may choose to display a slideshow on the screen (as

opposed to a blank screen or the Bluetooth Sound Sync screen) while audio is playing.

This section describes how to download background images using the TV Manager “Insert

Background Image(s)” option, though you may also use the Ez Download utility to download

the background image(s), if desired. See “Ez Download Utility” on pages 33 to 36 for further

information.

Background Image File Guidelines

• A background image may be either a baseline or progressive JPEG or a 24-bit (RGB 8x8x8)

BMP.

• A JPEG image should be no larger than 6 MB.

• A BMP image should be no larger than 5.93 MB.

• The maximum resolution allowed for a background image is 1920 x 1080 pixels (FHD).

• Avoid using special characters, such as ?, &, @, etc., in a background image lename.

Before You Begin

• The background image le(s) must be stored in a folder named “LG_DTV” in the root directory

of the USB memory device.

• Ensure the USB device has been formatted with FAT format.

Download the Background Image(s)

1. Turn ON the TV, and then insert the USB memory device into either of the USB ports on the TV.

Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through

Mode) or the Function Menu (TV is not in Pass-through Mode).

3. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the

screen, select the All Settings menu icon and press OK to access the advanced TV setup

menus.

4. Use the arrow navigation keys to select/highlight either the General menu icon from the TV

setup menus or the Safety menu icon from the Function Menu. Then, press the number “7”

key a total of seven times to access the TV Manager (see example on following page).

Note: Ez Download is always selected by default when you initially access the TV Manager.

Also note that Diagnostics is for service use only.

5. If more than one USB memory device is currently connected to the TV, be sure to select the

USB device that contains the image le you wish to use. If necessary, use the arrow keys on

the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the

screen and press OK. Then, use the Up/Down arrow keys to select the appropriate USB device

from the pop-up list of USB devices displayed at the top of the screen.

USB Device

USB 1: Device 1

USB 2: Device 2

(Continued on next page)