Installation Manual

9
206-4313
Commercial Mode Overview (Cont.)
While the TV is in FTG Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items
will be read-only.
• FTG Mode via CPU conguration changes must be made using a “.tlx” le (typically edited in the FTG
File Manager), while FTG Mode via EBL conguration changes must be made using the FTG Device
Conguration Application. FTG Channel Map Conguration and FTG Installer Menu Conguration utilities
in both PC applications enable you to make changes, respectively, to the FTG Channel Map and FTG
Installer Menu settings as necessary. Based on the initial method used to congure the TV for FTG Mode
operation (via CPU or EBL), all subsequent changes must be transferred to either the TV CPU or the EBL
via a process that is in accordance or compatible with that method (see information on local conguration
in this document or refer to documentation for the head end device/server for information on remote
management).
• If it becomes necessary to restore the TV to Pass-through Mode, there are several options that will enable
you to do so. See Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
Pages 59 to 64 provide overviews of the utilities that comprise the FTG File Manager. Refer to the
Free-To-Guest (FTG) File Manager User Guide for further information on the FTG File Manager. Refer
to the Free-To-Guest (FTG) Device Configuration Application User Guide for information on the FTG
Device Configuration Application.
Remote Management in FTG Mode
When the TV is configured for FTG Mode via CPU, remote management of the FTG Channel Map and FTG
Installer Menu settings is provided by a Pro:Centric server, via a Clone/Configuration (.tlx) file loaded on the
Pro:Centric Admin Client. See the Pro:Centric Server Admin Client User Guide for further information.
When the TV is configured for FTG Mode via EBL, the b-LAN module, which is internal to the TV, allows
hospital/institution head end equipment (for example, an FMA-LG102) with b-LAN technology to provide
remote management of the FTG Channel Map and FTG Installer Menu settings. See Reference section,
“b-LAN Setup & Overview,” for further information.
Determining the TV Operating Mode
To determine the operating mode of the TV, press MENU on the Installer Remote. The menu displayed
depends on the operating mode. See examples below. If the Function Menu appears, the TV is in a mode
(FTG, PPV, etc.) that does not allow the end user to change the fundamental TV setup. If the TV setup
menus (Quick Settings) appear, the TV is in Pass-through Mode.
Function Menu
Indicates the TV is not in
Pass-through Mode . While
the TV is in this mode,
Installer Menu settings can
be accessed as read-only.
TV Setup Menus
Shows that the TV is in
Pass-through Mode .
Aspect Ratio
Sound Out
Audio Mode
General
Safety
Accessibility
Aspect Ratio
16:9
ASPECT RATIO
^