ENGLISH PLASMA TV OWNER’S MANUAL PLASMA TV MODELS 32PC5R* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
ACCESSORIES POWER TV 1 2 4 5 7 8 INPUT 0 RATIO ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. 3 6 9 MUTE EXIT MENU OK PR VOL VOL Owner's Manual PR FAV Q.
CONTENTS A C C E S S O R I E S .....................................................1 CONTENTS PREPARATION Front Panel Controls................................................. 4 Back Panel Information ............................................ 5 Stand Installation....................................................... 6 Attaching the TV to a Wall........................................7 Back Cover for Wire Arrangement......................... 8 POWER CORD ARRANGEMENT ...........................
TIME SETTING CONTENTS Clock Setup....................................................................67 Auto On/Off Timer Setting .......................................68 Sleep Timer Setting......................................................69 Auto Shut-off Setting...................................................70 TELETEXT Switch On/Off ..............................................................71 SIMPLE Text....................................................................71 TOP Text ........
PREPARATION FRONT PANEL CONTROLS ■ ■ This is a simplified representation of the front panel. Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth. PREPARATION Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the TV is switched on.
BACK PANEL INFORMATION ■ This is a simplified representation of the back panel. Image shown may differ from your TV.
PREPARATION STAND INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV.
ATTACHING THE TV TO A WALL (This feature is not available for all models.) ■ ■ 1 2 1 Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. 2 Secure the wall brackets with bolts (must purchase seperately) to the wall. Ensure that both brackets are even.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT Arrange the cables as shown picture. PREPARATION POWER CORD ARRANGEMENT After connecting the power cord to the AC input terminal, remove the bolt at the hole on the back cover and fix the power cord at the rear side of the TV by using the bracket for fixing the power cord.
■ ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. Power Supply PREPARATION Circuit breaker EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
PREPARATION WALL MOUNT: HORIZONTAL INSTALLATION PREPARATION For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall. 4 inches 4 inches 4 inches 4 inches 4 inches NOT USING THE DESK-TYPE STAND When installing the wall-mounted unit, use the protection cover for desk-type stand installation.
It is recommended that 32PC5RVH model only be used at an altitude of less than 6561 feet (2000m) to get the best quality picture and sound. ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ■ ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP Connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the TV.
COMPONENT IN VIDEO AUDIO VARIABLE OUT 1 Connecting a set-top box with an HDMI cable 2 RGB IN (PC) 1 Connect the HDMI output of the digital set-top box to the H D M I / D V I I N 1 or H D M I I N 2 jack on the TV. Select HDMI1 or HDMI2 input source using the I N P U T button on the remote control. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
Connecting with a HDMI to DVI cable ANTENNA IN COMPONENT IN AUDIO VIDEO VARIABLE OUT AUDIO IN (RGB/DVI) AV V OUT AV IN 1 2 RGB IN (PC) 1 EXTERNAL EQUIPMENT SETUP T AV IN L/MONO T EXTERNAL EQUIPMENT SETUP 2 HDMI/DVI IN HDMI IN ANTENNA IN 2 1 AV IN ANTENNA IN 14 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the TV. 2 Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV.
DVD SETUP Connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. COMPONENT IN VIDEO AUDIO VARIABLE OUT 1 Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O jacks on the TV. 2 RGB IN (PC) RG 1 2 HDMI/DVI IN 3 Turn on the DVD player, insert a DVD. 4 Select Component1 input source using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP Connecting with a RCA cable S-VIDEO EXTERNAL EQUIPMENT SETUP 16 2 COMPONENT IN 3 AUDIO VARIABLE OUT AUDIO IN (RGB/DVI) Select AV input source using the I N P U T button on the remote control. 2 RGB IN (PC) 1 HDMI/DVI IN 2 HDMI IN AV OUTT AV IN ANTENNA IN R ANT IN ANT OUT Insert a DVD into the DVD player and press PLAY on the DVD player. (Refer to the DVD player owner’s manual.
Connecting the HDMI cable COMPONENT IN VIDEO AUDIO VARIABLE OUT 1 1 Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the TV. 2 RGB IN (PC) Select HDMI1 or HDMI2 input source using the I N P U T button on the remote control. 3 Refer to the DVD player's manual for operating instructions. 2 HDMI/DVI IN HDMI IN EXTERNAL EQUIPMENT SETUP 2 1 1 ! NOTE The TV can receive video and audio signals simultaneously when using a HDMI cable.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), allow adequate distance between the VCR and TV. AUDIO IN ■ Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed AV OUT AV IN (RGB/DVI) images on the sides of the screen may remain visible.
Connecting with a RCA cable S-VIDEO ANT IN ANT OUT 1 AUDIO DIO RGB IN (PC) 2 HDMII IN AUDIO IN (RGB/DVI) AV V OUT AV IN L/MONO MONO VIDEO R AUDIO L/ VARIABLE OUT ANTENNA IN 1 V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Connect the A U D I O/V Audio Left = white, and Audio Right = red) 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select AV input source using the I N P U T button on the remote control.
Camcorder Video Game Set AUDIO IN (RGB/DVI) 20 VIDEO AV V OUT L R AV V IN L/MONO MONO VIDEO R AUDIO L/ (PC) OTHER A/V SOURCE SETUP EXTERNAL EQUIPMENT SETUP BLE T EXTERNAL EQUIPMENT SETUP 1 ANTENNA IN 1 V I D E O jacks between TV and external equipment. Match the jack colours. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select AV input source using the I N P U T button on the remote control. 3 Operate the corresponding external equipment.
EXTERNAL STEREO (This feature is not available for all models.) Use to connected either an external amplifier, or add a subwoofer to your surround sound system. COMPONENT IN VIDEO 1 AUDIO DIO VARIABLE OUT AUDIO IN (RGB/DVI) AV OUT AV IN 1 Connect the input jack of the stereo amplifier to the V A R I A B L E O U T jacks on the TV. 2 2 RGB IN (PC) 2 HDMI IN 1 ! NOTE G When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p .
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable COMPONENT IN VIDEO AUDIO VARIABLE OUT AUDIO IN (RGB/DVI) AV OUT AV V IN EXTERNAL EQUIPMENT SETUP 22 L/MONO 1 2 RGB IN (PC) 1 HDMI/DVI IN 2 HDMI IN ANTENNA IN 1 2 RGB OUTPUT AUDIO 1 Connect the RGB output of the PC to the R G B I N ( P C) jack on the TV.
! NOTE Horizontal and Vertical frequencies are separate. G We recommend using 852x480, 60Hz (32 inch VGA PLASMA TV models) for the PC mode, these should provide the best picture quality. G If the resolution of PC is over XGA, there will be no picture on the TV. G Connect the audio cable from the PC to the Audio input on the TV.(Audio cables are not included with the TV). G If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of the cable.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. POWER TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE EXIT MENU Auto configure EXTERNAL EQUIPMENT SETUP This function is for automatic adjustment of the screen position, clock, and phase.
Adjustment for screen Phase, Clock, Position If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. POWER To correct the screen size, adjust C l o c k. 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU It’s not available to use Phase, Clock function in COMPONENT (480i/480p/576i/576p/720p/1080i), HDMI (480p/576p/720p/1080i).
EXTERNAL EQUIPMENT SETUP Selecting Wide VGA mode POWER To view a normal picture, match the resolution of RGB mode and selection of VGA mode. This function works in the following mode: RGB[PC] mode. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK EXTERNAL EQUIPMENT SETUP PR VOL VOL PR Picture 1 Press the M E N U button and then use D / select the Picture menu. 2 Press the G button and then use D / Screen.
Initializing (Reset to original factory settings) POWER 1 This function operates in current mode. To initialize the adjusted value TV 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU EXTERNAL EQUIPMENT SETUP OK VOL PR VOL PR Picture 1 2 Press the MENU button and then use D / select the Picture menu. Press the G button and then use D / E E Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen XD Demo button to button to select Screen.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the TV on from standby or off to standby. POWER TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE WATCHING TV / PROGRAMME CONTROL RATIO EXIT MENU OK PR VOL VOL PR TV Returns to the TV viewing from any mode. Switches the TV on from standby. 0~9 number Selects a programme. buttons Selects numbered items in a menu. Switches the TV on from standby.
THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left the system settings to your preference. POWER Right) TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU VOLUME Adjusts the volume. UP/DOWN Programme Selects a programme. UP/DOWN OK Accepts your selection or displays the current mode. OK FAV Displays the selected favourite programme. Q.VIEW Returns to the previously viewed programme. PR VOL VOL LIST Displays the programme table.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , I N P U T, P R D / E button on the TV or press the P O W E R, T V, I N P U T, D / E, N U M B E R( 0~9 9 ) buttons on the remote control and the TV will switch on.
PROGRAMME SELECTION 1 Press the D / E or N U M B E R buttons to select a programme number. POWER VOLUME ADJUSTMENT Press the F / 2 If you wish to switch the sound off, press the M U T E button. 3 You can cancel the Mute function by pressing the M U T E, F / button. G button to adjust the volume. G 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU or I/II OK PR VOL VOL PR FAV Q.
WATCHING TV / PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. The OSD mainly use pictures for the Plasma TV models. 1 Press the M E N U button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to a higher level menu by pressing the O K or M E N U button.
AUTO PROGRAMME TUNING POWER Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this TV.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING Manual programme lets you manually tune and arrange the stations in whatever order you desire. WATCHING TV / PROGRAMME CONTROL 34 1 Press the M E N U button and then D / Setup menu. 2 Press the G button and then D / Tuning.
FINE TUNING Normally fine tuning is only necessary if reception is poor. POWER 1 Press the M E N U button and then D / the Setup menu. E button to select TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK PR VOL VOL PR 2 E button to select Setup 3 Press the G button and then D / E button to select Fine. 4 Press the G button and then F / the best picture and sound.
WATCHING TV / PROGRAMME CONTROL ASSIGNING A STATION NAME You can assign a station name up to five characters to each programme number. POWER TV 1 1 Press the M E N U button and then D / the Setup menu. E button to select 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK 2 WATCHING TV / PROGRAMME CONTROL Press the G button and then D / Manual Tuning. E PR VOL button to select VOL PR Setup 3 Press the G button and then D / Name. 4 Press the G button and then D / E button.
PROGRAMME EDIT POWER This function enables you to delete or skip stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK PR 2 Press the G button and then D / Programme Edit. 3 Press the G button to display the Programme edit menu. E E PR button to select SLEEP TIME Deleting a programme 1.
WATCHING TV / PROGRAMME CONTROL FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. Repeatedly press the FAV button to select stored favourite programmes. POWER 1 1 Press the M E N U button and then D / Setup menu. E button to select the TV 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK 2 Press the G button and then D / Favourite Programme. E button to select VOL PR VOL PR WATCHING TV / PROGRAMME CONTROL Setup 3 Press the G button.
SELECTING THE PROGRAMME TABLE You can check which programmes are stored in the memory by displaying the programme table. POWER A TV 1 2 3 4 5 6 7 8 9 Displaying programme table INPUT 0 MUTE Press the L I S T button to display the Programme table menu. RATIO EXIT MENU The programme table appears on the screen. OK One programme table contains ten programmes as shown. PR VOL VOL PR a. You may find some blue programmes.
WATCHING TV / PROGRAMME CONTROL KEY LOCK The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. POWER This TV is programmed to remember which option it was last set to even if you turn the TV off. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK 1 Press the M E N U button and then D / the Option menu.
This fundtion operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. POWER This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK If you do not require the SIMPLINK menu, select “Off ”. PR VOL Press the M E N U button and then D / Option menu.
WATCHING TV / PROGRAMME CONTROL SIMPLINK Functions Disc playback Control connected AV devices by pressing the D / E / F / G, O K buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.(The button does not provide such functions) Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it.
PICTURE CONTROL WATCHING PIP(PICTURE-IN-PICTURE) PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. PIP function is available in the Component, RGB, HDMI mode. (But, it can’t adjust 480i/576i resolution of Component mode.) POWER TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK PR VOL VOL PR Watching PIP/Double Window Q.
PICTURE CONTROL Input Source Selection for Sub Picture Press the P I P I N P U T button to select the input source for the sub picture. Each press of P I P I N P U T button is pressed, each input source for the sub picture is displayed. (Sub picture can be selected only TV, AV1, AV2) Sub Picture Size Adjustment (PIP mode only) PICTURE CONTROL Press the S I Z E button to adjust the sub picture size. With S I Z E button in PIP mode, sub picture is adjusted.
PICTURE SIZE (ASPECT RATIO)CONTROL You can watch the screen in various picture formats; S p e c t a c l e, O r i g i n a l, 4 : 3, 1 6 : 9, 1 4 : 9 and Z o o m 1 / 2. POWER If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using D / E button. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK This function works in the following signal.
PICTURE CONTROL • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. 14:9 • Zoom2 Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped. The picture adopting a compromise between alteration and screen converage.
PRESET PICTURE SETTINGS Picture Mode-Preset Dynamic Standard Mild User1/2 1 Select this option to display a sharp image. The most general and natural screen display status. Select this option to display a mild image. Selection this option to use a user defined setting. Press the M E N U button and then D / the Picture menu. E POWER TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU button to select OK VOL PR VOL PR Press the G button and then D / Picture Mode.
PICTURE CONTROL Auto Colour Tone Control(Warm/Medium/Cool) To initialize values (reset to default settings), select the Cool option. POWER Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. This menu is activated after selecting “User1” or “User2” in the Picture Mode.
MANUAL PICTURE ADJUSTMENT Picture Mode-User Option Contrast Brightness Colour Sharpness Tint POWER Adjusts the difference between light and dark levels in the picture. Increases or decreases the amount of white in the picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels.
PICTURE CONTROL Colour Tone - User Option POWER To adjust red, green, blue to any colour temperature you prefer. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU This menu is activated after selecting “User1” or “User2” in the Picture Mode. OK PR VOL VOL PR 1 PICTURE CONTROL 2 Press the M E N U button and then D / the Picture menu.
- PICTURE IMPROVEMENT TECHNOLOGY XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. POWER TV It is not possible to use this function in RGB-PC mode. 1 Press the MENU button and then D / the Picture menu. E button to select 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU 2 OK Press the G button and then D / E button to select XD.
PICTURE CONTROL DEMO POWER Use it to see the difference between XD Demo on and XD Demo off. It is not possible to use this function in RGB[PC] mode. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK VOL PR VOL PR Picture PICTURE CONTROL 1 Press the MENU button and then D / the Picture menu. 2 Press the G button and then D / E button to select E button to select XD Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen XD Demo Demo.
ADVANCED - CINEMA To set the TV up for the best picture quality for viewing films. POWER 1 This feature operates only in Analog TV, AV and Component 480i/576i mode. TV 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK PR VOL VOL PR Picture 1 Press the M E N U button and then D / E button to select the Picture menu. 2 Press the G button and then D / E button to select Advanced.
PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL When you view a film this function adjust the TV to best picture quality. Adjusting the contrast and the brightness of the screen using the black level of the screen. POWER This function works in the following mode: AV (NTSC-M) or HDMI. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK 1 Press the M E N U button and then D / the Picture menu.
PICTURE RESET Returns to the default factory setting for Picture Mode, Colour Temperature, XD, Advanced, Aspect Ratio. POWER 1 TV 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK VOL PR VOL PR Picture Press the M E N U button and then D / the Picture menu. 2 Press the G button and then D / Picture Reset.
PICTURE CONTROL IMAGE STICKING MINIMIZATION(ISM)METHOD A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. POWER White Wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash.
LOW-POWER PICTURE MODE This function allows you to reduce the power consumption of the TV. POWER TV 1 On I n - S t o r e mode, even though the Low Power function is On, it’s ineffective. 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK Press the M E N U button and then D / select the Option menu. 2 Press the G button and then D / Low Power.
PICTURE CONTROL FACTORY RESET It initializes the entire OSD (On Screen Display) settings. The Installation Guide Setup window is displayed again after the initialization. POWER TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK PR VOL VOL PR Option PICTURE CONTROL 1 Press the M E N U button and then use to select the O p t i o n menu. 2 Press the G button and then use select F a c t o r y R e s e t.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. POWER 1 TV 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK 1 Press the M E N U button and then D / the Audio menu. E button to select PR VOL VOL PR Audio 2 Press the G button and then D / Volume. E 3 Press the G button and then D / Off.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the frequency of the equalizer. POWER 1 Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
SOUND SETTING ADJUSTMENT -USER MODE Adjusting the audio equalizer. POWER TV 1 1 Press the M E N U button and then D / the Audio menu. E 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK button to select PR VOL VOL PR 2 Press the G button and then D / Sound Mode. Press the G button and then D / 4 Press the G button. button to select Audio Sound Mode Auto Volume Balance TV Speaker E 0 button to select User.
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to the preferred levels. POWER 1 TV 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK PR VOL VOL PR Audio 1 Press the M E N U button and then D / the Audio menu. 2 Press the G button and then D / Balance. E E Sound Mode Auto Volume Balance TV Speaker button to select button to select DE F G SOUND & LANGUAGE CONTROL 62 0 OK MENU 1 3 Press the G button and then F / desired adjustment.
TV SPEAKERS ON/OFF SETUP You can adjust the internal speaker status. POWER In AV, COMPONENT, RGB[PC] and HDMI mode, internal speaker audio can be operational even when there is no video signal. If you wish to use an external hi-fi system, turn off the TV internal speakers. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK PR VOL VOL PR Audio 1 2 Press the M E N U button and then D / the Audio menu.
SOUND & LANGUAGE CONTROL I/II Stereo/Dual Reception POWER When a programme is selected, the sound information for the station appears after the programme number and station name disappear. TV 1 2 3 4 5 6 7 8 9 Broadcast On Screen Display INPUT 0 MUTE Mono MONO RATIO EXIT MENU Stereo STEREO Dual DUAL I OK PR VOL A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice.
NICAM Reception If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received by pressing the I/II button repeatedly. When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O. 2 When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. 1 Press the M E N U button and then use D / Option menu. E 2 Press the G button and then use D / button to select Language. button to select the POWER 3 Press the G button and then use D / language.
TIME SETTING CLOCK SETUP You must set the time correctly before using on/off timer function. POWER If current time setting is erased by a power failure or the TV is unplugged, reset the clock. TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK 1 Press the M E N U button and then D / the Time menu. E PR VOL button to select VOL PR Time 2 Press the G button and then D / Clock. E button to select 3 Press the G button and then D / E button to set the hour.
TIME SETTING AUTO ON/OFF TIMER SETTING The Off time function automatically switches the TV to standby at a preset time. POWER Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time.
SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. POWER TV 1 1 Press the S L E E P button repeatedly to select the number of minutes. The display ‘ - - - ’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
TIME SETTING AUTO SHUT-OFF SETTING If the TV set is switched on and there is no input signal, it will switch off automatically after 10 minutes. POWER TV 1 2 3 4 5 6 7 8 9 INPUT 0 MUTE RATIO EXIT MENU OK PR VOL VOL PR Time 1 Press the M E N U button and then D / the Time menu. 2 Press the G button and then D / Sleep.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TELETEXT TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group.
SPECIAL TELETEXT FUNCTIONS ? A REVEAL Press this button to display concealed information, such as solutions to riddles or puzzles. Press this button again to remove the information from the display. A SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. A UPDATE Displays the TV picture on the screen while waiting for a new teletext page.
APPENDIX TROUBLESHOOTING The TV does not operate properly Check to see if there is any object between the TV and the remote control causing an obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Correct remote operating mode set: TV, VCR etc.? ■ Install new batteries. ■ The remote control does not work Is the sleep time set? ■ Check the power control settings. Has the Power supply been interrupted. ■ Is Auto sleep activated on this station.
The audio function does not work. Press the F / G button. ■ Sound muted? Press M U T E button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the TV ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to swith the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 32PC5R* MODELS Dimensions (Width x Height x Depth) with stand without stand Weight with stand without stand Power requirement 32PC5RV-TB / 32PC5RVH-TB / 32PC5RV1-TB / 32PC5RVC-TB 32PC5RV-TD / 32PC5RVH-TD / 32PC5RV1-TD / 32PC5RVC-TD 819.9 x 599.8x 258.4 mm 32.3 x 23.6 x 10.2 inches 819.9 x 554.2 x 78.1 mm 32.3 x 21.8 x 3.1 inches 16.7kg / 36.8 lbs 15.8kg / 34.