Owner's Manual
ENGLISH
Sets the menu screen to the desired language.
Conserve energy by using luminance compensation algorithm.
Saves energy using the high-efficiency feature.
Saves energy using the low-efficiency feature.
Disables the feature.
Turns the power LED on the front of the monitor or .
The power LED turns on automatically.
The power LED turns off.
Feature that automatically turns off the monitor when there is no movement on the screen for a period of
time. You can set a timer for the auto-off function. (, , , and )
HDMI Compatibility Mode feature can recognize the legacy equipment that does not support HDMI 2.0.
Enables .
Disables .
If the connected device does not support , the screen or sound
may not work properly.
Enables or disables .
Be sure to configure this option according to the DisplayPort version supported by your
graphics card. Set this option to if your graphics card does not support DisplayPort 1.2.
1
To view the , press the at the
bottom of the monitor and then enter the .
2
Go to
by moving the joystick.
3
Configure the options following the instructions that ap-
pear in the bottom right corner.
4
To return to the upper menu or set other menu items,
move the joystick to
◄
or pressing ( / OK) it.
5
If you want to exit the OSD menu, move the joystick to
◄
until you exit.
100 >
70 >
30 >
/
/
Quick Settings
Quick Settings
Brightness
Contrast
Volume
Input
Picture
General
: Back : Move : Ok
HDMI 1
HDMI1 >
>
>
/
/
Quick Settings
Full Wide
On
Input
Input
Input List
Aspect Ratio
Auto Input Switch
Picture
General
: Back : Move : Ok
>
>
>
>
/
/
Quick Settings
Custom
Input
Picture
General
Picture
Picture Mode
Picture Adjust
Game Adjust
Picture Reset
Color Adjust
: Back : Move : Ok
>
>
>
>
>
>
>
>
/
/
Quick Settings
English
Low
Off
Off
Enable
Off
Off
General
Language
SMART ENERGY SAVING
Power LED
Automatic Standby
DisplayPort 1.2
Quick Charge
>
OffHDMI Compatibility Mode
OSD Lock
Reset
Input
Picture
General
: Back : Move : Ok
Each option is described below.