Online Manual

47
ENGLISH
[Input Manager]
You can set the PC or DTV label for each external input.
[SIMPLINK Setup]
• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage.
• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E].
• [Standby]: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
follows:
Transmission Reception
All O O
Send Only O X
Receive Only X O
[Display power (On/Off) sync]
(Depending on model)
(This function is only supported by the Signage box)
• This is a function to control the power of the Display connected to the HDMI OUT to be synchronized with the power
of the Signage box.
• When the power of the Signage box is changed from Off to On, it turns on the Display and tries to switch the input
to the Signage box screen.
• When the power of the Signage box is changed from On to Off, it turns off the Display.
• [On/Off]: Enable/Disable this function
NOTE
• It is necessary to enable the CEC function on the Display