Online Manual

64
ENGLISH
[Change Password]
This feature enables you to set the password you use to enter the Installation menu. (The default password: 000000)
1 Enter your current password.
2 Enter a new 6-digit password.
3 Enter the same password again in the Confirm Password field for confirmation.
[Software Update]
Use software updates to check and obtain the available version.
• Software Version: Display the version of the software.
• Auto Update: When it is set to On, updates are automatically made without a separate confirmation procedure.
• Update Detection Notification: Sets whether to Enable/Disable the update detection notification.
• CHECK FOR UPDATES: Manual checks for available updates in the server.
This feature is available only when network is connected.
[Enterprise Settings]
• Enter your company account code to apply the corresponding enterprise settings.
• When your code has been entered, the monitor set gets reset, thereby applying the corresponding enterprise
settings.
• This feature does not get activated if a code has already been entered.
[HDCP Dynamic output control]
• Only HDCP protected content will be encrypted delivered when you set ‘On’.
• Every content will be encrypted delivered when you set ‘Off’.