Owner’s Manual
Table Of Contents
- BASIC
- GETTING READY
- CHECKING BEFORE INSTALLATION
- PRECAUTIONS FOR USE
- PRODUCT SPECIFICATIONS
- LICENCE
- SAFETY PRECAUTIONS
- USING THE REMOTE CONTROL
- MAKING CONNECTIONS
- SETTINGS
- CONTENT MANAGER
- MANAGEMENT TOOLS
- TO CONTROL AN EXTERNAL PC USING TOUCH SCREEN
- SMART CALIBRATION
- IR CODE
- CONTROLLING MULTIPLE PRODUCTS
- TROUBLESHOOTING
86
ENGLISH
CONTROLLING MULTIPLE PRODUCTS
• This only applies to certain models.
Use this method to connect several products to a single PC. You can control several products at a time by connecting
them to a single PC.
In the Option menu, the Set ID must be between 1 and 1000 without being duplicated.
Connecting cables
• Images may differ according to the model.
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select
an input source and adjust the OSD menu from your PC.
Monitor 4 Monitor 3 Monitor 2 Monitor 1 PC
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
4P Cable (sold separately) RS-232C Gender RS-232C Cable
(sold separately)
RS-232C Cable (sold separately)
PC
Monitor 1 Monitor 2 Monitor 3 Monitor 4