Owner’s Manual
Table Of Contents
- BASIC
- GETTING READY
- CHECKING BEFORE INSTALLATION
- PRECAUTIONS FOR USE
- PRODUCT SPECIFICATIONS
- LICENCE
- SAFETY PRECAUTIONS
- USING THE REMOTE CONTROL
- MAKING CONNECTIONS
- SETTINGS
- CONTENT MANAGER
- MANAGEMENT TOOLS
- TO CONTROL AN EXTERNAL PC USING TOUCH SCREEN
- SMART CALIBRATION
- IR CODE
- CONTROLLING MULTIPLE PRODUCTS
- TROUBLESHOOTING
87
ENGLISH
Communication Parameter
Baud Rate: 9600 BPS
Data Length: 8 bits
Parity Bit: None
Stop Bit: 1 bit
Flow Control: None
Communication Code: ASCII
NOTE
• When using 3-wire connections (non-standard), an IR
daisy chain cannot be used.
• Be sure to only use the provided gender to connect
properly.
• When you have daisy-chained multiple Signage
products to control them simultaneously, if you
attempt to turn on/off the master device in a
continuous manner, some products may not turn
on. In this case, you can turn those monitors on by
pressing the MONITOR ON button, not the Power
button.
ID
BACK
TILE
ON
OFF
EXIT
(Power)
MONITOR ON