Owner’s Manual
Table Of Contents
- BASIC
- GETTING READY
- CHECKING BEFORE INSTALLATION
- PRECAUTIONS FOR USE
- PRODUCT SPECIFICATIONS
- LICENCE
- SAFETY PRECAUTIONS
- USING THE REMOTE CONTROL
- MAKING CONNECTIONS
- SETTINGS
- CONTENT MANAGER
- MANAGEMENT TOOLS
- TO CONTROL AN EXTERNAL PC USING TOUCH SCREEN
- SMART CALIBRATION
- IR CODE
- CONTROLLING MULTIPLE PRODUCTS
- TROUBLESHOOTING
24
ENGLISH
Ez Setting
[Video Wall]
[Ez Setting] [Video Wall]
Set Video Wall options to create a wide visual canvas.
• [Tile Mode]: Turn [Tile Mode] on or off.
• [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors.
• [Simple Configuration]: automatically sets [Tile ID] based on the connection direction of the set RS232C.
- When the [Set ID] of the connected set is complete, the performance of [Simple Configuration] is guaranteed only
for the master set ([Set ID] 1).
Run this function for the master set ([Set ID] 1).
• [Natural Mode]: Display the image excluding the area that overlaps with the monitor’s bezel so that the image
displayed has a more natural feel to it.
• [Frame Control]: Adjust the sets that run [Scan Inversion] and frame deviation.
- When running [Scan Inversion], please run [Frame Control] for the sets that do not run [Scan Inversion].
• [Scan Inversion]: Reduce screen deviation between adjoining video walls by changing screen scanning method.
• [White Balance]: Configure white balance settings (White Pattern, R/G/B-Gain, and Luminance).
• [Reset]: Reset to initial settings.
• [Reboot to Apply]: Reboot the set to configure a changed Frame Control/Scan Inversion value.
NOTE
• When Tile Mode is enabled, automatically set [Frame Control] for odd numbered rows and [Scan Inversion] for even
numbered rows.