0 (% LCD TV OWNER'S MANUAL 37LG50 42LG50 47LG50 52LG50 42LGSODC 47LGSODC 52LGSODC 42LG55 47 LGS5 Please read this your operating mber and serial number of the set. ibel attached _is information on the back cover and quote to your dealer when you require service.
WARNING / CAUTION WARNING/ CAUTION To prevent fire or shock this product hazards, do not expose to rain or moisture. Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS O Read these instructions. Protect the power cord from being walked on Keep these instructions. or pinched Heed all warnings. receptacles, and the point where they exit from the apparatus. particularly at plugs, convenience Follow all instructions. O Do not use this apparatus near water. Only use attachments/accessories the manufacturer. O by Clean only with dry cloth.
SAFETY INSTRUCTIONS Never touch this apparatus or antenna a thunder or lighting storm. during O WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV 0 When mounting with a TV on the wall, make sure wet hands. Do not install not to install the TV by the hanging power and near flammable signal cables on the back of the TV.
@ ANTENNAS Outdoor antenna If an outdoor precautions should head antenna is installed, below. An outdoor not be located power Moving Make sure grounding follow unplugged the in the vicinity light is turned off, Do not press against or put stress on the front panel of the TV. of over- electric product may take 2 or more people to carry larger TVs. antenna system lines or other the and all cables have been removed.
CONTENTS WARNING / CAUTION ............................ 2 SAFETY INSTRUCTIONS .......................... 3 Channel Setup - Auto Scan (Auto Tuning) ........................... 40 - Add / Delete Channel (Manual Tuning) ...... 41 FEATURE OF THIS TV ............................... 8 Accessories ...................................................... 9 Front Panel Information ................................... 10 - Channel Editing ........................................ 42 Input List ...............
69 Troubleshooting .............................................. Maintenance ................................................. 98 100 - User Mode ........... 70 Product Specifications ................................... 101 Auto Volume Leveler (Auto Volume) Preset Sound Settings (Sound Mode) Sound Setting Adjustment ................. 68 .............. Clear Voice ..................................................... 71 Balance ..........................................................
FEATURE OF THIS TV SRSCO) 0__° D I G E T A L is a trademark of SRSLabs, Inc. IT] DOLBY TruSurround XT technology is incorporated under license from SRSLabs, Inc. CALIBRATE LIKE A PRO: Sophisticated DIGITAL[ Manufactured "Dolby under license from Dolby Laboratories. "and the double-D symbol are trademarks of Dolby Laboratories. and detailed calibrations can be made through the ISFccc mode. Detailed calibration requires a licensed technician.
PREPARATION ACCESSORIES Ensure that the following accessories dealer where you purchased The accessories included are included with your TV. If an accessory is missing, please contact the the TV. may differ from the images below.
PREPARATION FRONTPANELINFORMATION ,,,IImage shown may differ from your TV. -0 _o ""_NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). _o © z Intelligent to the __ VOLUME (+,-) Buttons Indicator Illuminates red in standby mode.
BACK PANELINFORMATION ""_Image shown may differ from your TV. ii!!!i!i!i!!ii!!!i!!!!!i!i! !iiiiiii "O _o _!_!_i_i_!_!ii_:i_ii_i_i_i_i_ii!!!_ii_iiiiiiiiiiiiiiiiiiiii_i_i!i!i_iii i _i_ iiiiii_ii_i!iiii_i_!_!_!_i! !ii!i!i!i!i!i :iiiiii!iii!i!ii_iiii_i_iiiii_i / _ilil¸ @ ® m !i_ _¸__: _i_'_ ¸ _ _o © z (Except 42/47/52 @ HDMI/DVI IN, HDMI @ DIGITAL IN Digital Connection. Supports HD video support 480i. and Digital audio. Doesn't or HDMI to @ COMPONENT IN Analog Connection. Supports HD.
PREPARATION STAND INSTRUCTION ,,,IImage shown may differ from your TV. DETACHMENT INSTALLATION (Only 37/42tGS*) m O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. // /,J0 z e ssemble the parts of the STAND with COVER BASE of the TV. BODY e Loose the bolts from TV. 0 Detach the stand from TV. BODY BASE e Assemble the TV as shown.
VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular contact to the floor. When attaching to other building materials, please your nearest dealer. -O If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. _o m We recommend LG recommends that you use an LG brand wall mount when mounting that wall mounting be performed by a qualified the TV to a wall. professional _o installer.
PREPARATION CABLE MANAGEMENT ,,,IImage shown may differ from your TV. "O rtl 0 © z Connect the cables as necessary. To connect additional EXTERNAL EQUIPMENT equipment, see the SETUP section. Secure the power cable with the PROTECTIVE BRACKET prevent and the screw as shown. It will help the power cable from being removed by accident. PROTECTIVE (This feature O Install the CABLE MANAGEMENT shown. CLIP BRACKET is not available for all models.
DESKTOP PEDESTALINSTALLATION ,,,IImage shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. _0 II"1 4 inches _o 4 inches 4 inches 4 inches © z SWIVELSTAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
PREPARATION SECURING THE TV TO THE WALL TO PREVENTFALLING WHEN THE TV IS USED ON A STAND ,,,IYou should purchase necessary components to prevent TV from falling off of the stand. ""_Image shown may differ from your TV. m We recommend Additionally, © z potentially Caution: that you set up the TV close to a wall so it cannot fall over if pushed backwards.
mTo prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLECONNECTION 1. Antenna (Analog or Digital) -O _o Wall Antenna Socket or Outdoor Antenna without m a Cable Box Connection. _o For optimum picture quality, adjust the antenna direction if needed.
EXTERNAL EQUIPMENT SETUP 01_ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. llllll_ Image shown may differ from your TV. HD RECEIVERSETUP This TV can receive digital you do receive digital Component over-the-air/digital signals from a digital cable signals without set-top an external box or other digital external digital set-top box. However, if device. Connection m X 1.
HDMI Connection 1. How to connect m X ,-I m O onnect the digital set-top box to HDMI/DVI 2, or 3 * jack on the TV. IN1, z m _0 O No separate audio connection is necessary. HDMI supports both audio and video. C m z ,-I 2. How to use m 01_ Turn on the digital set-top ,-I C box. (Refer to the owner's manual for the digital 01_ Select the HDMI1, TV using the INPUT HDMI2, set-top box.) or HDMI5 _ input source on the button on the remote control.
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect m x m O Connect the DVI output of the digital set-top theHDMI/DVI IN 1,2, orS*jackontheTV. O Connect the PC audio output (RGB/DVl) jack on the TV. _o box to z m X:) c to the AUDIO "O m z 2. How to use 01_ Turn on the digital m c "O al for the digital set-top box. (Refer to the owner's manu- set-top box.) 01_ Select the HDMI1, TV using the INPUT HDMI2, button on the remote control.
DVD SETUP Component Connection 1. How to connect O Connect the video outputs COMPONENT r'rl (Y, PB, PR) of the DVD to the IN VIDE01 x jacks on the TV. r'_ Match the jack colors (Y = green, PB = blue, and PR = red). z r'rl e c Connect the audio outputs of the DVD to the COMPONENT IN AUDIO1 jacks on the TV. r'_ z 2. How to use r'rl c Turn on the DVD player, insert a DVD. Select the Component 1 input source on theTVusing the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP S-Video Connection 1. How to connect m x O onnect S-VIDEO the S-VIDEO output input on the TV. O onnect the audio outputs input jacks on the TV. of the DVD to the z X:) c of the DVD to the AUDIO 2. How to use z Turn on the DVD player, insert a DVD. Select the AV 1 input source on the TV using the INPUT button on the remote control. c "O Refer to the DVD player's manual for operating instructions. HDMI Connection 1.
VCR SETUP To avoid picture noise (interference), If the 4:3 picture format This phenomenon Antenna leave an adequate distance between the VCR and TV. is used; the fixed images on the sides of the screen may remain visible on the screen. is common to all TVs and is not covered by warranty. Connection r'_ x r_3 1. How to connect z r_3 O Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN sock- c "O et on the TV.
EXTERNALEQUIPMENT SETUP Composite (RCA) Connection 1. How to connect O Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) x 2. How to use z Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) X:) c Select the AV 1 input source on the TV using the INPUT button on the remote control. If connected z to AV IN2, select AV2 input source on the TV. c "O S-Video Connection I.
OTHERA/V SOURCESETUP Camcorder 1. How to connect 0 Connect the Video Game Set AUDIO/VIDEO between TV and external Match the jack colors. jacks equipment. r'_ x (Video = yellow, Audio Left = white, and m _o Audio Right = red) z m X_ c 2. How to use 01_ Select the AV2 input source on the TV using the INPUT button on the remote control. 01_ If connected to AV INI input, z select the AVI m input source on the TV. 01_ Operate the corresponding m external equipment.
EXTERNALEQUIPMENT SETUP PCSETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically VGA (D-Sub 15 pin) Connection m 1. How to connect x z O onnect the VGA output (PC) jack on the TV. XD c O onnect the PC audio output to the (RGB/DVI) jack on the TV. z of the PC to the RGB AUDIO 2. How to use Turn on the PC and the TV. c Select the RGB-PC input source on the TV using the INPUT button on the remote control. DVI to HDMI Connection I.
m X .-.4 r"rl _o z m ,o C "O r"rl z "-'4 m Supported a .,__. _ Display Specifications 31 •468 70•09 3146 • 9 70.08 31.469 59.94 35.156 3Z879 56.25 60•31 48•363 56.476 60•00 70•06 4Z776 59.87 63.981 60•02 4Z712 60•015 75.00 60•00 66•587 59.934 (RGB-PC, HDMI-PC) .-I C "O "_ '_ ................. i;;............................. _00 o.................
EXTERNALEQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. m x m _o z m X:) c m z m c "0 Select PICTURE. Select Screen (RGB-PC). Select Resolution. Select the desired resolution.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, not correct, try using the manual settings or a different if the image is still resolution or refresh rate on the PC. r'_ x m z m c m z m c Select PICTURE. Select Screen (RGB-PC). • If the position correct, • If picture after Auto Select Auto config.. of the image is still not try Auto adjustment can adjust Phase. needs to adjustment the again.
EXTERNALEQUIPMENT SETUP Adjustment If the picture for screen Position, is not clear after auto adjustment Size, and Phase and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. m x m z m _D c m z m c Select PICTURE. 01_ Position: ture Select Screen (RGB-PC). to left/right Size, or Phase. is to adjust pic- and up/down as you prefer.
Screen Reset (Reset to original factory values) Returns Position, This feature Size, and Phase to the default factory settings. operates only in RGB-PC mode. m x m _o z m c m z m c -0 Select PICTURE. Select Screen (RGB-PC). Select Reset. Select Yes.
EXTERNALEQUIPMENT SETUP USB CONNECTION 1. How to connect O onnect the USB device to the USB IN jack on the side of TV. Except 42/47/52LG50DC) x _o z _> 2. How to use After connecting _D c "O z r-r1 c "O 32 (_ p.48) the USB IN jack, you use the USB function.
AUDIO OUT CONNECTION Send the TV's audio to external audio equipment via the Audio Output port. Analog 1. How to connect r_l x O Connect audio outputs to the TV's AUDIO OUT jacks. r_l z r_l O Set the "TV Speaker option - Off" in the AUDIO menu. (_ p.73). See the external audio equipment instruction manual for operation. c r_l z Digital r_l c 1. How to connect O Connect one end of the optical or coaxial cable to the TV's OPTICAL or COAXIAL port of DIGITAL AUDIO OUT.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. POWER Turns your TV or any other programmed off, depending Q.MENU _h I z sensor on the TV. equipment on or __ on the mode. Select the desired quick menu source. _ p.37 MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu.
THUMBSTICK (Up/Down/Left Right/ENTER) Navigate the on-screen menus and adjust the system settings to your preference. RETURN Allows the user to move return one step in an interactive application or other user interaction function. SIMPLINK See a list of AV devices connected When you toggle AV MODE to TV. this button, the SIMPLINK menu appears at the screen. _ p.46-47 N -r" z It helps you select and set images and sounds. _ p.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV @ @ First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the (b/l, INPUT, CH ( ^ v ) button on the TV or press the POWER INPUT, CH( ^ ton on the remote control. or v ), Number (0~9) but- Select the viewing source by using the INPUT button on the remote control. 01_ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
QUICK MENU / FAVORITECHANNEL SETUP Your TV's OSD (On Screen Display) Q.Menu may differ slightly (Quick Menu) is a menu of features Aspect Ratio: which users might use frequently. Selects your desired picture format. Backlight: Adjust the brightness of LCD panel to control the brightness of the screen. Clear Voice: By differentiating the human sound range from others, it helps make human voices sound better. Picture depend from what is shown in this manual.
WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential purchasing the TV. It will be displayed activated from the user menus. 0_Default selection is "Home". home environment. 01_ "In-store" We recommend Mode is only intended Step1. Mode Setting for viewing the TV for the first the TV on for the first time. setting the TV to "Home" for use in retail environments. - Picture mode" manually while inspecting mode after 5 minutes.
ON-SCREENMENUSSELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. z < N I > z z fT1 T N © Z © For USA For Canada Display each menu. Select a menu item. Enter to the pop up menu. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL CHANNELSETUP Auto Scan (Auto Automatically channel list. Tuning) finds all channels available through Run Auto Tuning again after any Antenna/Cable antenna connection or cable inputs, and stores them in memory on the changes. z < N -r" > Z Z r_l N © Z Select CHANNEL. © Select Auto Tuning. 01_ A password is required to gain access to Auto Tuning menu if the Lock System is turned on. Select Yes. Run Auto tuning. Return to the previous menu.
Add/Delete If selecting Channel (Manual DTV or CADTV input Tuning) signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. -r" z c_ < N -r" > Z Z fT1 N 0 Z Select CHANNEL. Select Manual 0 Tuning. 01_ A password is required Select DTV, TV, CADTV, or CATV. to gain access to Manual Tuning menu if the Lock System is turned on. Select channel you want to add or delete. Select Add or Delete. Return to the previous menu.
WATCHING TV / CHANNEL CONTROL CHANNELSETUP Channel A custom Editing list can be created List are displayed by toggling each channel on or offwith in black and the channels deleted Once a channel is highlighted right corner of the screen. you can add or delete ENTER button. from the Custom the channel The channels List are displayed by referring in the Custom in gray. to the small window at the top- N -r" z < N -r > z z 1_ Add/Delete fT1 N © Z © Select CHANNEL. Select Channel Edit.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. N -r" z Select the desired input source. You can also select the desired input source in the INPUT menu. < [ Antenna i_l_ [ Cable [_1_[ AV1 ]_1,[ AV2 [_1_[ Component1 [_1_[ Component2 i t . L .
WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use. iiiiiii_i_!_(_!iijiiM_iiiI_iiIiiiiii!i!i!iiiiiiiMiiiMi_i_i!iiiiiiMiii_iIi_iii_i _iiiiiiiiliiiiliiii!!iiiiiiiiiiiixiiiiiii_iiiiiiMiiiiiiiiii_iiiiiiiii 'iiiiiliiiii_ii_iiiiii! .......... b_,_ i!i _¸¸¸¸¸_'j_ _¸_'_'_' _'_""_' 'i_ '_ 'J_, _"ii_""" "ii" _?,i"_i _¸'' '_¸¸¸"" 'f' _i 'iiiii'_,iF_i?i'p ¸¸¸'' _'_ ''i? _iiiii_"ii ¸"i] ......
AV MODE You can select the optimal images and sounds. ÷ T -r" z Press the AV MODE button repeatedly to select the desired source. < N -1> z z 0_If you select "Cinema" Cinema will be selected in AV mode, both for "PIC- TURE menu - Picture Mode" menu - Sound Mode" and "AUDIO respectively. _f_If you select "Off" in AV mode, the "Picture Mode" and "Sound Mode" return to previous selected N O z _m O value.
WATCHING TV / CHANNEL CONTROL C,_ImPLInK This function The TV might operates only with devices with the not function This allows you to control properly _._ImPLInK and play other AV devices connected settings. To start using SlMPLINK, turn it on in the user menus. -r" z < N -r" > Z Z fT1 Select OPTION. N 0 Z _m Select SIMPLINK. 0 Select On or Off. Return to the previous menu. Return to TV viewing. 46 logo.
SIMPLINK Functions Direct Play: out additional _Select Disc AV device: playback: 01_ Power _Switch Sync After connecting off control Enables you to select one of the AV devices connected Control all devices: audio-out: Power AV devices to the TV, you can directly the devices and play media with- settings. connected AV devices by pressing the ^ When you power offthe TV, all connected v to TV. < > , ENTER, I_, II, I L _I_I and I_I_ buttons. devices are turned off.
USB ENTRY MODES When you connect a USB device, this screen is displayed In USB device, you can not add a new folder Connect the USB device to the USB or delete automatically. the existing folder. IN y jacks on the side of TV. _ It doesn't support This TV supports When C removing Select the USB USB device. USB HDD JPG and MP3. the Eject USB device menu before removing the Select Photo List or Music List.
PHOTOLIST You can view .JPG files from The On Screen Display Supported photo USB storage on your model devices. may be slightly different. file: *.JPG You can play JPG files only. Only baseline scan is supported amongJPG. c Screen Components 27 Select USB. _)_ ) Select Photo List.
USB Photo Selection and Popup Menu C ,:_Move _ PopUp Menu CH Move Page _AM Mark Exit When you select a file (not folder), menu is displayed. t_, Vie_. Display the selected this PopUp item. _, Mark All: Mark all photos on the screen. _;_Unmark _'_Delete: _ Close: _% Move _) PopUp Menu CH Move Page FAV Mark _ _: All: Deselect all marked photos. Delete the selected Close the pop-up photo item. menu. Exit Select the target folder or drive. Use the CH photo page.
Full Screen Menu You can change the Photo screen mode. List view so that it fills the screen. More operations are available in full c '_:_ Move _) PopUp Menu CH Move Page Mark Exit $ _Move (_PopUpMenu CH MovePage Mark ;RETURN Exit The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. _UsetheCH _ _ Select the target folder or drive. Select the desired photos. Show the Popup menu. Select View. The selected full size.
USB Select the Side Show, (Rotate), Delete, Option, or Hide. ++_Use v < > button to select and control the menu on the full_sized screenl ,++i++i+++_i!!i C _, Slide Show: Selected photos are displayed during the slide show. If no photo is selected, all photos in the cur- rent folder are displayed during slide show. + Set the time interval of the slide show in Option. A slide show continues After for a maximum of 4 hours.
MUSIC LIST You can use the Music This TV cannot List menu to play MP3 files form play back copy-protected The On Screen Display on your model a USB storage device. files. may be slightly different. Supported music file: *.MP3 Bit rate range 40Kbps - 320Kbps • Sampling rate (Sampling Frequency) MPEG1 : 52000, 44100, 48000Hz c MPEG2 : 16000, 24000, 22050Hz Do MPEG2.5 : 16 - 48KHz Screen Components Select Music Select USB.
USB Music Selection Up to 6 music titles and Popup Menu are listed per page. Z _, Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected C <_ Move (_ PopUp Menu CH Move Page Mark Exit musics to play, the next one in the current er will be played. If you go to a different and press the ENTER button, the foldfolder current music in playback will stop. _, Stop Play ing musics.
The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time. c When music is playing, _ A damaged or corrupted is displayed in front of the music play time. music file that does not play Gisplays 00:00 Music files with copy-protection will not play. Press ENTER. button •. or RETURN as the play time. to stop the screen saver.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source use 4:3 or 16:9 aspect ratio.
Set by program Zoom 1 Selects the proper picture proportion to match the source'simage. Choose Zoom 1 when you want to view the pic- (4:3"* ture without bottom 4:3) any alteration. portions However, the top and of the picture will be cropped. m v.. ..................... m _u (16:9--_ 16:9) Zoom 2 Choose Zoom 2 when you want the picture to be altered, both The picture alteration vertically taking extended and cropped. a halfway trade off between and screen coverage.
PICTURECONTROL PRESETPICTURE SETTINGS Picture Mode - Preset There are factory presets for picture setting manually, or use the Intelligent settings available in the user menus. You can use a preset, change each Sensor. N c N © z © 0_When selecting Intelligent Sensor the most suitable picture is automatically adjusted according to the surrounding conditions. Select PICTURE. Select Picture Mode. Select Intelligent Standard, Cinema, Return to the previous menu. Return to TV viewing.
Color Tone - Preset Choose one of three automatic color adjustments. cool to see less intense colors with more blue. Set to warm to enhance hotter colors such as red, or set to "O N C m N O Z O Select PICTURE. Select Advanced Select Color Select Cool, Medium, Control. Temperature. or Warm. Return to the previous menu. Return to TV viewing.
PICTURECONTROL MANUAL PICTUREADJUSTMENT Picture Mode - User Mode Adjust the picture This feature appearance is disable to suit your preference in "Picture Mode-Intelligent and viewing situations. Sensor". "O N C _o m N O Z Select PICTURE. _o O Select Picture Select Vivid, Mode. Standard, Select Backlight, Sharpness, Contrast, Color, Make appropriate or Tint. adjustments. Return to the previous menu. Return to TV viewing. 6O Cinema, Sport, Brightness, or Game.
Picture Mode - Expert Control By segmenting fit, offering categories, the optimal Expert1 picture and Expert2 quality provide more categories which users can set as they see for users. "O N C m N O Z Select PICTURE. O Select Picture Mode. Select Expert1 or Expert2. Select Expert Control. Select your desired menu option. Make appropriate adjustments. Return to the previous menu. Return to TV viewing.
PICTURECONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Fresh Color: Adjusts Noise Reduction: Gamma: Optimizes the contrast the color automatically of the reflection Removes interference High gamma values display according automatically up to the point whitish to the brightness to reproduce images and low gamma values display "O C m N O Z O Select PICTURE. Control. Select Fresh Contrast, Reduction, or Gamma. Select your desired options. Return to the previous menu.
ADVANCED CONTROL- BLACK (DARKNESS) LEVEL Adjusting the contrast This feature is disabled and the brightness of the screen using the black level of the screen. in DTV and RGB-PC mode. "O N C m N © Z © Select PICTURE. 01_ Low: The reflection darker. Select Advanced Control. 01_ High: The reflection of the screen gets of the screen gets brighter. 01_ Auto: Select Black Level. Realizing the black level of the screen and set it to High or Low automatically. Select Low or High.
PICTURECONTROL ADVANCEDCONTROL- EYECARE Dims extremely This feature bright is disabled pictures. in "Picture Mode-Vivid, c _D m © z _D Select PICTURE. © Select Advanced Select Eye Control. Care. Select On or Off. Return to the previous menu. Return to TV viewing. 64 Cinema".
ADVANCED CONTROL- REALCINEMA Set up the TV for the best picture When you operate Real Cinema appearance (3:2 Pull-Down for viewing Mode movies. or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog and HDMI 1080i mode. This TV ouputs 48Hz in DTV, Component, TV/CATV, Digital and HDM11080p DTV/CADTV), AVl, AV2, Component 480i/1080i, (24Hz). -O N C _o m N O Z _o O Select PICTURE. Select On or Off.
PICTURECONTROL PICTURE RESET Settings of the selected picture modes return "O N C m N O Z Select PICTURE. O Select Reset. Initialize the adjusted value. Return to TV viewing. 66 to the default factory settings.
POWER INDICATOR "O N C m N O Z O Select OPTION. 01_ Standby Select Power brightness Indicator. Light: You can set the of the LED on the front side of the TV during power standby. 01_ Power Light: You can set the the LED on the front side of the TV to be turned Select Standby Light or Power Light. on or off while watching the TV. Select your desired options. Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. 0 C z Select AUDIO. z C 1-11 Select Auto Volume. N 0 z .-I 0 Select On or Off. Return to the previous menu. Return to TV viewing.
PRESETSOUND SETTINGS (SOUND MODE) Sound Mode sound lets you options Standard, enjoy the best sound based on the program Music, Cinema, without any special adjustment as the TV sets the appropriate content. Sport, and Game are preset for optimum sound quality at the factory and are not adjustable. 0 c Z _o z c Select AUDIO. l'rl Select Sound Mode. f_l_ You can also adjust Sound the Q. Menu. Select Standard, Cinema, Sport, Mode in N 0 Z .-I 0 Music, or Game.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT- USERMODE Adjust the sound to suit your taste and room situations. Select AUDIO. Make appropriate Select Sound Mode. Return to the previous menu. O c Z _o adjustments. Select Standard, Cinema, Music, Sport, Return to TV viewing. or Game. z c Select Treble or Bass. l'rl N 0 Z .-I 0 SRS TRUSURROUND XT Select AUDIO. Select SRS TruSurround Select On or Off. XT SRS TruSurround any multi-channel Return to the previous menu.
CLEAR VOICE By differentiating the human sound range from Select AUDIO. others, it improves the sound quality 01_ If you select TruSurround of voices. "Clear Voice-On", SRS XT feature will not 0 c Z work. Select Clear Voice. 0101_ You can also adjust Clear Q-Menu. Voice in the z c Select 0 n or Off. l'rl N 0 Z .-I Return to the previous menu. 0 Return to TV viewing.
SOUND & LANGUAGE CONTROL BALANCE Adjust 0 c Z the left/right sound of speaker to suit your taste and room situations. Select AUDIO. _o z Select Balance. c l'rl N 0 Z .-I 0 Make appropriate Return to the previous menu. Return to TV viewing. 72 adjustments.
TV SPEAKERSONIOFF SETUP Turn the TV speakers off if using external Select AUDIO. audio equipment. 0 c Z _o Select TV Speaker. z c Select 0 n or Off. l'rl N 0 Z .-I Return to the previous menu. 0 Return to TV viewing.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return 0 c Z Select AUDIO. z c Select Reset. l'rl N 0 Z .-I Initialize the adjusted value. 0 Return to TV viewing. 74 to the default factory settings.
STEREO/SAPBROADCASTSETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. 0 c Z Analog TV _o Digital TV z c Select SAP. Select Multi Audio. l'rl Select Mono, Stereo, or SAP. Select other languages. N 0 Z .-I 0 Return to TV viewing. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided This feature operates only in DTV/CADTV O c Z _o Select OPTION. z c Select Language. l'rl N 0 Z .-I Select Audio. 0 Select your desired language: English, Spanish, or French Return to the previous menu. Return to TV viewing. 76 mode. by the broadcasting station.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. 0 c Z Select OPTION. z c Select Language. l'rl N 0 Z .-I Select Menu. 0 Select your desired language. From this point on, the on-screen menus will be shown in the selected language. Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Caption tioning Broadcasting must be provided information to help people with hearing if provided and is usually the program's digital System Captions on a program. dialog. Caption/Text, and analog channels on the Antenna/Cable. which was last set when you turned loss watch TV. Select a caption Analog caption if provided displays information by the broadcaster, This TV is programmed the power off.
Digital Choose Other Broadcasting the language System Captions you want the DTV/CADTV Languages can be chosen for digital This function in only available when Caption Captions to appear in. sources only if they are included on the program. Mode is set On. /Mtt! _i_!_!!_iiiii!i_iiii!iiiYiiOii_iiiiiiii_5ii_iiiiii!ii!;_ii_ii_ii_Xi;ii!!iiiiiiIi!iiiiii!i_i_iii11i_i;;_i;_i;iii_i_ii_iiii_ii_ii_iiiii_ti;iiiii_ii_iIiiiii;_i_ii_i;iiiiii1i_ii_iiiiiiiii_ ....... _ _!i!_i_iii!i/i_i_i_H _r_i_qiiiiii: _¸¸ ....
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV This function O c Z _o captions in only available that appear when Caption on your Mode is set On. Select OPTION. 01_ Size: Select Caption 01_ Font: Select a typeface 0_Text Color: Select Digital 01_ Bg (Background) background color. Option. for the text. a color for the Color: Select a 01_ Bg (Background) Opacity: the opacity for the background 0 Select Custom. 0101_ Edge Type: 0101_ Edge Color: edges.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically The digital channel signal Set the clock manually from a digital includes if the current channel information signal. for the current time is set incorrectly time provided by the broadcasting station. by the auto clock function. Select TIME. m Select Clock. m z Select Auto. Select your viewing area time zone. • U.S.A: Eastern, Central, Pacific, Alaska, or Hawaii.
TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. Select TIME. Select Clock. m m Select Manual. z Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing.
AUTO ON/OFF TIME SETTING This function The Off Time operates only if the current function overrides The TV must be in standby time has been set. the On Time mode for the On If you do not press any button within automatically mode. revert to standby function Time if they are both set to the same time. to work.
TIME SETTING SLEEPTIMER SETTING The Sleep Timer turns Note that this setting the TV off at the preset time. is cleared when the TV is turned off. Select TIME. Select Sleep m m Timer. Select Off, 1 O, 2 O, 3 O, 6 O, 9 O, 120, 180, or 240 minutes. z Return to the previous menu. Return to TV viewing. 84 ,I,_You can also adjust Sleep the Q-Menu.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. Select TIME. Select Auto Sleep. Select 0 n or Off. m m z Return to the previous menu. Return to TV viewing.
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. this function, the following It is also possible to block all program viewing for a time period.
Lock System Enables or disables the blocking scheme you set up previously. Select LOCK. Input the password. Select Lock System. _o m z Select 0 n or Off. Return to the previous menu. 01_ When you select O n, the Lock System is enable. N © z _o © _o Return to TV viewing.
PARENTALCONTROL / RATINGS Set Password Change the password by inputting a new password twice. Select LOCK. Input the password. Select Set password. m z Choose any 4 digits for your new password. N 0 z 0 As soon as the 4 digits the same 4 digits on the Confirm. Return to the previous menu. Return to TV viewing.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children (_ _ Block/Unblock _, Move CH Move Page Previous to watch. :_TO_N* Exit Select LOCK. Input the password. Select Block Channel. m z Select a channel to block or unblock. N 0 z Block or unblock a channel. 0 Return to the previous menu. z Return to TV viewing.
PARENTALCONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according set the ratings limit the movie ratings - For USA only to the movie ratings limits specified, by blocking so children out all the movies with the ratings cannot view certain above a specified limit only applies to movies shown on TV, not TV programs, movies. You can level. Keep in mind that such as soap operas. Select LOCK. 01_ G (General audience) Input the password.
TV Rating Children Prevents children - For USA only from watching rating does not apply to other certain ences in the TV Rating - sub menu, your ___ children's TV programs. TV programs, Unless you block children can view those according certain to the ratings limit set. The children TV programs intended for mature audi- programs. Select LOCK. Input the password. m z Select TV Rating-Children. 0101_ Age (applies to TV-Y, TV-Y7) Select Age or Fantasy Violence.
PARENTALCONTROL / RATINGS TV Rating General - ForUSAonly Based on the ratings, blocks certain TV programs that you and your family do not want to view. Select LOCK. Input the password. Select TV Rating-General. _D m z 01_ Age (applies N O z Select Age, Dialogue, Sex or Violence. Language, to TV-G,TV-PG,TV-14,TV- MA). 01_ Dialogue-sexual dialogue (applies to language (applies to TV-PG,TV- 14). _D 01_ Language-adult O Select block options. TV-PG, TV-14, TV-MA).
TV Rating English - For CANADA Selecting canadian _ english language only rating system. Select LOCK. ,l_E (Exempt) Input the password. ,l_C (Children) 01_ C8+ (Children eight years and older) ,l_G (General programming, Select TV Rating-English. suitable for all audiences) m z ,i,l_ PG (Parental Guidance) Select E, C, C8+, G, PG, 1 4+, ,i,l_14+ (Viewers 14 years and older) 1 8+, or Blocking ,i,l_18+ (Adult Off.
PARENTALCONTROL / RATINGS TV Rating French - ForCANADA Selecting canadian french language only rating system. Select LOCK. 0,_E (Exempt) Input the password. 0,_G (General) 01_ 8ans+ (General-Not convenient for lit- tle children) Select TV Rating-French. 01_13ans+ (Not convenient t"t3 z 01_16ans+ (Not convenient Select E, G, 8ans+, 1 3ans+, 1 6ans+, 1 8ans+, or Blocking 94 (This programs is only adults) Return to the previous menu. Return to TV viewing. z c_ off.
DOWNLOADABLE RATING This function may become available in the future and will be available This function operates only when TV has received Regions only for digital channels. Rating data. Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. _ MENU Select LOCK. m z Input the password. N O z Select Downloadable Rating. O Select desired Downloadable Rating option. Select desired option z c_ and block it.
PARENTALCONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. Except 42/47/52LG50DC Select LOCK. Input the password. Select Input Block. m z N O z Select input source. O Select On or Off. z Return to the previous menu. Return to TV viewing.
KEY LOCK The TV can be set up so that it can only be used with the remote This feature can be used to prevent This TV is programmed to remember unauthorized which option control. viewing by locking out the front panel controls. it was last set to even if you turn the TV off. Select OPTION. Select Key Lock 01_ In Key Select 0 n or Off. Lock 'On', off, press the ¢b / I, INPUT, CH ( ^ v ) button on the TV or POWER, INPUT, CH ^ v or NUMBER buttons on the remote control.
APPENDIX TROUBLESHOOTING mml Check to see if there is any object between the product causing obstruction. and the remote control Ensure you are pointing the remote control Ensure that the batteries are installed with correct Ensure that the correct remote operating polarity directly at the TV. (+ to +, - to -). mode is set: TV, VCR etc. Install new batteries. Is the sleep timer set? Check the power control Check whether settings. the product is turned Try another channel.
mm_ Press the VOL or VOLUME button. mini Sound muted? Press MUTE button. mini Try another channel. The problem mini Are the audio cables installed may be with the broadcast. properly? mini Adjust Balance in menu option. mmff A change in ambient when the product humidity is turned or temperature may result in an unusual noise on or off and does not indicate a fault with the product. mini Check HDMI cable over version 1.3. mini Check USB cable over version 2.0. m_Use normal MP3 file.
MAINTENANCE Early malfunctions enjoy your Caution: Careful and regular Be sure to turn the power off and unplug Cleaning 0 can be prevented. cleaning can extend the amount of time you can new TV. the power cord before you begin any cleaning. the Screen Here's a great way to keep the dust offyour water and a little fabric softener screen for a while. Wet a soft cloth in a mixture of lukewarm or dish washing detergent. Wring the cloth until it's almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 40.3 pounds / 18.3 kg 54.0 pounds / 24.5 kg 34.3 pounds/ 48.5 15.6 kg AC100-240V- pounds / 22.0 kg 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm m 01_ The specifications shown above may be changed without prior notice for quality improvement.
PROGRAMMING THE REMOTE CONTROL The provided universal remote control Note that the remote may not control Programming II can be programmed to operate most remote-controllable devices. all models of other brands. a code into a remote mode Testing your remote control. To find out whether component your remote control can operate other such as a STB and press the corresponding trol, while pointing at the component. responds If the component correctly.
Remote Control Code VCR _IWA 034 031 033 067 068 012 031 034 041 032 040 102 104 105 107 109 112 113 115 120 122 022 043 048 135 003 007 010 014 _,!!_:::_r i_'_ _£__'_i _'_'_ _'_i_i_!_z_,i_ _ __:,_,_,_ _z_'_,',_,_ _,,i_ AKAI 016 043 125 146 046 124 MARANTZ 072 ANAM BROKSONIC ....
HDSTB AL,PHASTARDSR 123 HOUSTON TRACKER 033 037 AMPLICA 050 057 104 BIRDVlEW 051 126 129 CHANNEL MASTER 013 036 014 055 015 018 CHAPARRAL.
IR CODES 1. How to Connect 01_ Connect your wired remote control 2. Remote Control 0_Output to the Remote Control port on the TV. IR Codes waveform Single pulse, modulated with 37917KHz signal at 455KHz L I- Tc Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 0_Configuration 1 st frame of frame Low custom code High custom Data code code Data code Repeat frame I I m Repeat code 4 Tf 0_Lead code J L 9 ms F J 4.5 4 ms 0_Repeat code -0 -0 m z 0.
POWER Q.
EXTERNALCONTROLTHROUGHRS-232C The RS-232C port allows you connect the RS-232C or an A/V control system) 01_ Note: RS-232C on this unit is intended The instructions software. to control below are provided input jack to an external control the TV's functions device (such as a computer externally. to be used with third to help with programming party RS-232C software control hardware or to test functionality and software.
RS-232C Configurations Either cable below can be used. PC PC TV RXD TXD TXD RXD TXD RXD GND GND GND GND DTR DSR DTR DTR DSR DTR DSR DSR RTS CTS RTS RTS CTS RTS CTS CTS D-Sub 9 Set ID Use this function to specify Refer to 'Real Data Mapping1 a TV ID number. '. _ p.111. m z Select OPTION. Select Set ID. Choose the desired TV ID number. The adjustment range of Set ID is 1 -99. Return to the previous menu. Return to TV viewing.
Command Reference 01 Power k 02. Input Select 04.Screen List a x Mute b O0 ~ 01 1 k r O0 ~ 64 (1_. p.110) 15. Bass e k s O0 ~ 64 k t 00 - 64 k u O0 ~ 02 ] u (_ p.112) b O0 ~ 01 k c (_ p.110) 1 1Z Color Temperature k d 00 ~ 01 05. Volume Mute k e 00 - 01 06. Volume Control k f O0 - 64 20. Channel Add/Del m ntrast k g O0 - 64 21 Key m c (_. p.113) 08. Brightness k h O0 ~ 64 22. Backlignt m g O0 ~ 64 09 k i O0 - 64 10.
01. Power (Command: 05. Volume Mute (Command: k a) To control Power On/Off Transmission [k][a][ of the TV. ][Set ID][ Data 00: Power Off To control volume mute on/off. ][Data][Cr] You can also adjust mute using the MUTE button on remote control.
09. Color (Command: k i) 14. Treble To adjust screen color. (Command: k r) To adjust treble. You can also adjust color in the PICTURE menu. You can also adjust treble in the AUDIO menu. TransmiSsiOn[k][i][ TransmissiOn [k] [r][ ][Set ID][ ][Data][cr] Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping' as shown below. ACknowledgemen_ 10.
18. Auto Configuration To adjust picture automatically. mode. (Command: position j u) and minimize image shaking Auto configuration only works in RGB-PC Transmission [j ] [u] [ ] [Set !D] [ ] [Data] [Cr] Data 1 : To set Acknowledgement 19. Channel Tuning [u][] [set ID] [ ] [OK/NG] (Command: [Data] [x] m a) To tune channel to following physical/major/minor TranSmission[m] [a][] [ ] [Data02] [set iD][] [Dataoo] [ ] [Data03] [ ] [Data04] number.
Data 05: The table above lists the binary code which must be converted to Hexadecimal 20. Channel Add/Del (Command: m b) To add and delete the channels before sending. For example: The binary code to tune the sub source to an NTSC TransmissiOn [m] [b][] cable channel is "1000 Data 00: Channel Delete 0001 ", which translates to "81" in Hex.
