User Manual

2.3.6 External Interface
(1) Memory Card Interface
Memory Card Compact flash card (CFA TYPE-I)
Function Updating firmware, changing internal TS-ROM
(2) ETHER Interface
Specifications 10BASE-T or 100BASE-TX
Function Setting this instrument, reading status
(3) GPIB
Specifications ANSI/IEEE Std 488.1-1987.
Function SH1, AH1, T8, L4, SR0, RL2, PP0, DC1, DT0, C0, E1
(4) USB Interface
Specifications USB1.1
Function For connection of external equipment for enhancing in the
future (Future support)
(5) Remote Control
Connector 24-pin Rectangular
57 LE-30240 (Amphenol)
Remote Function Recalling of preset memory (INC/DEC)
Input Level TTL
2.3.7 Display Panel
LCD 5.7” QVGA (320 x 240) TFT color
2.4 General Specifications
Environmental Conditions
Operating Temperature 0 to 40°C
5 to 40°C (OP70 installed)
Operating Humidity ≤85% RH (without condensation)
Spec-Guaranteed Temperature 10 to 35°C
Spec-Guaranteed Humidity ≤85% RH (without condensation)
Operating Environment Indoor use
Operating Altitude Up to 2000 m
Overvoltage Category Ⅱ
Pollution Degree 2
Power Requirements
Voltage 90 to 250 VAC, 50/60 Hz
Power Consumption 140 W max.
Dimensions and Weight
Dimensions 426 (W) x 150 (H) x 450 (D) mm
Weight 14 kg approx.
Accessory
Power cord..............................1
Instruction Manual ..................1
2-4