OWNER’S MANUAL LED LCD TV / LCD TV Please read this manual carefully before operating your set and retain it for future reference. LED LCD TV MODELS 50LS4000 P/NO : SAC35375604 (1208-REV02) LCD TV MODELS 42CS570 47CS570 www.lg.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. yy TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
IMPORTANT SAFETY INSTRUCTIONS Never touch this apparatus or antenna during yy a thunder or lightning storm. When mounting a TV on the wall, make sure yy not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects yy to fall into the product, and do not drop anything onto the screen. Dot Defect yy The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels.
IMPORTANT SAFETY INSTRUCTIONS DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. For USA and Canada FCC NOTICE ENGLISH This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 7 LICENSES Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
TABLE OF CONTENTS TABLE OF CONTENTS 2 7 7 8 10 IMPORTANT SAFETY INSTRUCTIONS 27 - Using favorite channels 28 - Checking current program info 29 Using additional options 29 - Adjusting aspect ratio 30 - Changing AV modes 30 - Using the input list OPEN SOURCE SOFTWARE NOTICE 31 Using the quick menu TABLE OF CONTENTS 32 - Connecting USB storage devices 33 - Browsing files 35 - Viewing Videos 38 - DivX registration code 39 - Viewing Photos 41 - Listening to music LICENSES IN
TABLE OF CONTENTS 57 - HDMI Connection 58 - DVI to HDMI Connection 59 - Component Connection 60 - Composite Connection 61 Connecting to a PC 63 Connecting to a USB 64 SIMPLINK Connection 64 - Activating and Using the SIMPLINK menus 9 NOTE Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may yy differ slightly from that shown in this manual. The available menus and options may differ yy from the input source or product model that you are using.
ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
ASSEMBLING AND PREPARING 11 For CS570 series ENERGY AV MODE INPUT TV SAVING 1 2 4 5 7 8 9 0 FLASHBK LIST 3 6 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Owner’s manual, CD manual Power Cord Stand Body (See p.16) Stand Base (See p.16) Stand Screws 8 EA, M4 x 20 (See p.16) (For 42CS570) Protection cover (See p.18) Desk-mount Screw (See p.19) ENGLISH Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING For 50LS4000 ENERGY AV MODE INPUT TV SAVING 1 2 4 5 7 8 9 0 FLASHBK LIST 3 6 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Owner’s manual, CD manual Power Cord Stand Body (See p.17) Stand Base (See p.17) Stand Screws 8 EA, M4 x 20 (See p.17) Protection cover (See p.18) Desk-mount Screw (See p.19) Cable holder (See p.22) ENGLISH Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING 13 Parts and buttons For CS570 series Side Connection panel Headphone output AV (Audio and Video) input USB IN IN 3 HDMI input VIDEO L/MONO AUDIO R USB input Screen Speakers AV IN 2 VOL CH ENGLISH PR L ANTENNA / CABLE IN R 2 1 Touch button2 Description ꔰ/I Turns the power on or off. INPUT Changes the input source. MENU Accesses the Home menu, or saves your input and exits the menus.
ASSEMBLING AND PREPARING For 50LS4000 Side Connection panel Headphone output AV (Audio and Video) input USB IN IN 3 HDMI input VIDEO L/MONO AUDIO R USB input Screen Speakers AV IN 2 ENGLISH VOL CH PR L ANTENNA / CABLE IN R 2 1 Touch button2 Description ꔰ/I Turns the power on or off. INPUT Changes the input source. MENU Accesses the Home menu, or saves your input and exits the menus.
ASSEMBLING AND PREPARING 15 Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should yy be at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION Avoid touching the screen at all times, as yy this may result in damage to the screen.
ASSEMBLING AND PREPARING Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. For CS570 series 1 2 4 EA M4 x 20 Stand Body Front ENGLISH CAUTION Stand Base 3 When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING 17 For 50LS4000 1 2 4 EA M4 x 20 Stand Body Front Stand Base CAUTION Top View 3 4 EA M4 x 20 CAUTION Make sure that the screws are fastened yy completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much yy force; otherwise they may be worn out and get loosened.
ASSEMBLING AND PREPARING To detach the stand, 1 4 EA M4 x 20 CAUTION When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 2 ENGLISH 3 NOTE Protection cover This will protect the opening from yy accumulating dust and dirt. When installing the wall mounting bracket, yy use the Protection cover.
ASSEMBLING AND PREPARING Mounting on a table 19 Securing the TV to a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. (For 42CS570, 50LS4000) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand. 10 cm (4 inches) 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) (Depending on model) Using the Kensington security system (optional) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.
ASSEMBLING AND PREPARING Mounting on a wall 21 CAUTION Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. We recommend that you use an LG brand wall mount when mounting the TV to a wall. 10 cm (4 inches) 10 cm Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING Tidying cables For 42/47CS570 1 Gather and bind the cables with the cable management clip. 2 Fix the cable management clip firmly to the TV. ENGLISH Cable management clip For 50LS4000 1 Gather and bind the cables with the cable holder. Cable holder CAUTION Do not move the TV by holding the cable yy holder, as the cable holders may break, and injuries and damage to the TV may occur.
REMOTE CONTROL 23 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL VOL Adjusts the volume level. ENERGY RATIO FAV (See p.27) Accesses your favorite channel list. INPUT INFO (See p.28) Views the information of the current program and screen. TV SAVING 1 2 3 4 5 6 7 8 9 0 FLASHBK LIST MUTE Mutes all sounds. CH Scrolls through the saved channels. PAGE Moves to the previous or next screen. MENU Accesses the main menu. FAV ENGLISH VOL INFO CH MUTE MENU AV MODE Q.MENU P A G E AV MODE (See p.30) Selects an AV mode. Q.MENU (See p.
WATCHING TV 25 WATCHING TV Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. The Power indicator turns red and the TV switches to Standby mode. 2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time.
WATCHING TV Watching TV Managing channels 1 In Standby mode, press the power button on the remote control to turn the TV on. 2 Press INPUT and select TV. 3 Control the TV using the following buttons while you are watching TV. Button Description CH (^, v) Scrolls through saved channels. LIST Selects a channel on the saved channel list. 0-9 Selects a channel by entering numbers. VOL (+, -) Adjusts the volume level. MUTE Mutes all sounds. AV MODE1 Selects an AV mode (See p.30). Q.
WATCHING TV 27 Using favorite channels Editing your channel list 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to CHANNEL and press ENTER. Add the channels that you watch frequently to the favorite list. Setting up your favorite list 3 Press the Navigation buttons to scroll to Channel Edit and press ENTER. 4 Edit channels using the following buttons. Button 5 Description ^ Highlights the channel type. ^, v, < , > Scrolls through channel types or channels.
WATCHING TV Checking current program info Press ENTER to view the information of the currently program while you are watching. The following information appears at the top of the screen. Banner information 8-1 ꔖ DTV Program title Current time Brief Info Title Test... Sun, Feb 21, 2012 10: 40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ TV-PG D L S V ꘋꔫ CNN Next - 11:40 AM News Icon Description Multilingual ꔥ The program contains two or more audio language services.
WATCHING TV Using additional options - 29 Set By Program: Displays images in the same aspect ratio as the original image. (4:3 4:3 ) Adjusting aspect ratio Resize an image to view at its optimal size by pressing RATIO while you are watching TV. Set By Program NOTE You can also change the image size by yy pressing Q.MENU or accessing Aspect Ratio in the PICTURE menu. The available ratio varies depending on the yy input source. - The input sources: HDMI-PC support 4:3 and 16:9.
- WATCHING TV Cinema Zoom1: Formats an image to the cinemascope ratio, 2.35:1. To change the ratio of the cinema zoom, yy press < or > and its range is from 1 to 16. Using the input list Selecting an input source 1 Press INPUT to access the input sources. - The connected device displays on each input source. NOTE You can also access the input source list yy by selecting INPUT in the MENU menu. NOTE If you enlarge or reduce an image, the yy image may be distorted.
WATCHING TV Using the quick menu Adding an Input label Add a label to an input source so that you can easily identify a device connected to each input source. Input Label Customize frequently used menus. 1 Press Q. MENU to access the quick menus. 2 Press the Navigation buttons to scroll through ꔌ AV1 ◀ AV2 ◀ ▶ Component1 ◀ ▶ Component2 ◀ ▶ RGB-PC ◀ ▶ VCR ▶ ꔍ Close 1 Press INPUT to access the input sources. the following menus.
ENTERTAINMENT ENTERTAINMENT Connecting USB storage devices Connect USB storage devices such as a USB flash drive or external hard drive to the TV and use multimedia features (See "Browsing files" on p. 33). USB IN Connect a USB flash drive or USB memory card reader to the TV as shown in the following illustration. IN 3 or ENGLISH VIDEO L/MONO AUDIO R To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the TV or files. 1 Press Q.
ENTERTAINMENT Browsing files 1 2 Page 1/1 Music List Access the photo, music, or movie lists and browse files. USB 1 XTICK 1 Connect a USB storage device. 33 Drive1 Page 1/1 001. - B01 .mp3 002. -B02.mp3 003. B03.mp3 004. - B04.mp3 00:00 00:00 00:00 00:00 3 4 005. - B05.mp3 00:00 2 Press MENU to access the main menus. 3 Press the Navigation buttons to scroll to MY � Move MEDIA and press ENTER.
ENTERTAINMENT Type Supported File Formats Photo yyJPG yyAvailable size Baseline: 64 pixel (W) x 64 pixel (H) - 15360 pixel (W) x 8640 pixel (H) Progressive: 64 pixel (W) x 64 pixel (H) 1920 pixel (W) x 1440 pixel (H) * Do not use the progressive option when saving JPG files on your PC. yyIt may take some time to open highresolution images in full screen.
ENTERTAINMENT Viewing Videos NOTE Your TV can display video files from a USB storage device. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 35 : Abnormal files are displayed using this yy graphic. yy : Non-supported files are displayed using this graphic. 7 Control playback by using the following buttons. Press the Navigation buttons to scroll to Movie List and press ENTER. 4 Select Drive1 to access the connected USB storage device.
ENTERTAINMENT ENGLISH The screen may suffer from temporary yy interruptions such as image stoppage or faster playback when you change the audio language. If you play a damaged video file, the video yy file may not be played correctly or some player functions may not be unavailable. The TV may not properly play the video files yy produced with certain encoders.
ENTERTAINMENT 37 NOTE When replaying a video file after stopping, yy select “Yes” to restart where it previously stopped. If continuous series files exist within the yy folder, the next file will automatically be played. But, this excludes cases when the Repeat function of Movie List Option is turned “On” (See p.36) or when set as Play Marked. Set Video. Allows you to change Video presets. (Refer to "PICTURE Settings" on p.45). Set Audio. Allows you to change Audio presets.
ENTERTAINMENT DivX registration code Registering the DivX code The DivX registration code allows you to rent or purchase the latest movies at www.divx.com/vod. To play a rented or purchased DivX file, the file’s registration code should be same as your TV’s DivX registration code. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Blue button. 4 Press the Navigation buttons to scroll to DivX VOD Registration and press ENTER.
ENTERTAINMENT Viewing Photos 39 NOTE You can view image files saved on a USB storage device. The displays on the screen may differ based on the model. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Navigation buttons to scroll to Photo List and press ENTER. 4 Select Drive1 to access the connected USB yy : Abnormal files are displayed using this graphic. yy : Non-supported files are displayed using this graphic.
ENTERTAINMENT NOTE Option values changed in Photo List do not yy affect Movie List and Music List. Option values changed in Photo List or yy Music List are changed likewise in Photo List and Music List, but not Movie List. Q.MENU options for photo list 1 Press Q. MENU. A pop-up window will appears. 2 Press the Navigation buttons to scroll to photo list option and press ENTER. 3 Press the Navigation buttons to scroll to one of the following options and press ENTER. Set Photo View.
ENTERTAINMENT Listening to music NOTE 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Navigation buttons to scroll to Music List and press ENTER. yy : Abnormal files are displayed using this graphic. yy : Non-supported files are displayed using this graphic. 7 Control playback by using the following buttons. 4 Select Drive1 to access the connected USB storage device.
ENTERTAINMENT Q.MENU options for music list 1 Press Q. MENU. A pop-up window will appears. 2 Press the Navigation buttons to scroll to music list option and press ENTER. 3 Press the Navigation buttons to scroll to one of the following options and press ENTER. NOTE Option values changed in Movie List does yy not affect the Photo List and Music List. Option value changed in Photo List and yy Music List are changed likewise in Photo List and Music List. Set Audio Play. Select Repeat or Random option.
CUSTOMIZING SETTINGS 43 CUSTOMIZING TV SETTINGS The Main Menus 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER. 4 When you are finished, press EXIT. Menu (Depending on model) Description Sets up and edit channels. PICTURE Adjusts the image size, quality, or effect. AUDIO Adjusts the sound quality, effect, or volume level.
CUSTOMIZING SETTINGS Customizing Settings CHANNEL Settings CHANNEL • Auto Tuning • Manual Tuning 1 Press MENU to access the main menus. • Channel Edit 2 Press the Navigation buttons to scroll to CHANNEL and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. The available channel settings are described in the following.
CUSTOMIZING SETTINGS 45 PICTURE Settings PICTURE 1 Press MENU to access the main menus. • Aspect Ratio 2 Press the Navigation buttons to scroll to PICTURE and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting Picture Mode Description Selects one of the preset image or customizes options in each mode for the best TV screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the TV. Mode Intelligent Sensor Sets the TV to adjust the image settings, such as contrast, brightness, sharpness, color, or tint, automatically corresponding to the surrounding environments.
CUSTOMIZING SETTINGS 47 Basic Image Options Setting Backlight Description Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. NOTE yyIf you use the “Energy saving - Off, Minimum, Medium”, Backlight will be available. Contrast Increases or decreases the amplitude of the video signal.
CUSTOMIZING SETTINGS Setting Description Real Cinema or Film Mode Makes video clips recorded in film look more natural by eliminating judder effect. DVD and Blu-ray movies are filmed at 24 frames per second (fps). With LG Real Cinema, every frame is consistently processed 5 times in 1/24 of a second producing 120 fps with TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally eliminating the judder effect. This function can also work when TruMotion is off.
CUSTOMIZING SETTINGS AUDIO Settings 1 Press MENU to access the main menus. AUDIO 2 Press the Navigation buttons to scroll to AUDIO and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS TIME Settings 1 Press MENU to access the main menus. TIME 2 Press the Navigation buttons to scroll to TIME and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you ꔂ Move ꔉ Enter • Clock • Off Time : Off • On TIme : Off • Sleep Timer : Off want and press ENTER. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS LOCK Settings 1 Press MENU to access the main menus. LOCK ꔂ Move 2 Press the Navigation buttons to scroll to LOCK and press ENTER. • Set Password • Lock System : On 3 Press the Navigation buttons to scroll to the setting or option you • Block Channel • Movie Rating • TV Rating-Children • TV Rating-General • Downloadable Rating • Input Block • Key Lock : Off want and press ENTER. - To return to the previous level, press BACK.
CUSTOMIZING SETTINGS Setting TV RatingGeneral (Depending on model) Description Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip). NOTE yy The V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children.
CUSTOMIZING SETTINGS OPTION Settings 1 Press MENU to access the main menus. OPTION 2 Press the Navigation buttons to scroll to OPTION and press ENTER. • Language 3 Press the Navigation buttons to scroll to the setting or option you • Power Indicator want and press ENTER. - To return to the previous level, press BACK. • Caption ꔂ Move ꔉ Enter : Off • Initial Setting • Set ID :1 • Mode Setting : Home Use 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting Initial Setting Description Resets the TV to factory default and erases all stored channels. Customizes the TV settings to suit your preference. The initial setup screen will appear when you turn on the TV for the first time. NOTE yy When selecting “Lock System - On”in the LOCK menu, the message to enter the password appears. yyIf you forget your password, press “0-3-2-5” on the remote control. Setting Language Selects a desired language.
MAKING CONNECTIONS 55 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS Connection Overview Connect various external devices to the ports on the TV back panel. 1 Find an external device you want to connect to your TV as shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. ENGLISH HD Receiver VCR DVD USB PC Gaming device Speaker NOTE If you connect a gaming device to the TV, use the cable supplied with the gaming device.
MAKING CONNECTIONS 57 Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. Choose any DVI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS 59 Component Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could case the image to display in black and white or with yy distorted color. Check to ensure the cable are matched with the corresponding color connection.
MAKING CONNECTIONS Composite Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
MAKING CONNECTIONS 61 Connecting to a PC NOTE It is recommended to use the TV with the HDMI connection for the best image quality. yy Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or yy brightness.
HDMI 62 / DVI IN 2 1 MAKING CONNECTIONS / DVI IN 2 1 Method B: DVI to HDMI Connection Choose any DVI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS 63 Connecting to a USB Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the My media menu to use various multimedia files.
MAKING CONNECTIONS SIMPLINK Connection No. 1 Use the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. Your TV only works with the devices that support HDMI-CEC. But only devices with the logo are supported. Connect one end of the HDMI cable to the HDMI IN terminal on the rear of the TV and the other end to the SIMPLINK device. 2 3 4 5 Description Displays the previously viewed TV channel. Plays discs.
MAINTENANCE 65 MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. Preventing “Image burn” or “Burn-in” on your TV screen CAUTION Make sure to turn the power off and yy disconnect the power cord and all other cables first. When the TV is left unattended and unused yy for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
TROUBLESHOOTING TROUBLESHOOTING General Problem Solution Cannot control the TV with the remote control. yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to ). yyCheck if the batteries are still working and properly installed ( to , No image display and no sound is produced. yyCheck if the product is turned on. yyCheck if the power cord is connected to a wall outlet.
TROUBLESHOOTING 67 Video Problem Solution An image displays in black and white or the color quality is poor. yyAdjust the color setting in the menu option. yyKeep a sufficient distance between this product and other electronic products. yyScroll to other channels. There may a problem with the broadcast. Horizontal or vertical bars appears or images blur yyCheck if there are local interferences such as an electrical appliance or power tool.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS RGB (PC), HDMI (PC) supported mode Resolution Horizontal Vertical Frequency (KHz) Frequency (Hz) 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1360x768 47.712 60.015 1280x768 RGB-PC 47.776 59.870 1280x1024 63.981 60.02 1920x1080 67.5 60.
SPECIFICATIONS Video Supported Formats (Depending on model) File Video Decoder Extension name Audio Codec mpg, mpeg MPEG1, MPEG2 MP2, MP3, Dolby Digital, LPCM dat MPEG1 MP2 ts, trp, tp MPEG2, H.264, AVS, VC1 MP2, MP3, Dolby Digital, AAC, HE-AAC vob MPEG1, 2 MP2, MP3, Dolby Digital, LPCM mp4, mov MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 AAC, HE-AAC, MP3 mkv H.
SPECIFICATIONS 71 IR CODES Code (Hexa) 08 Function POWER Note Code (Hexa) Function Note 0F TV Remote control Button 5B EXIT Remote control Button D6 TV Discrete IR Code (TV Input Selection) C4 POWER ON Discrete IR Code (Only Power On) C5 POWER OFF Discrete IR Code (Only Power Off) 5A AV Discrete IR Code (AV1 Input Selection) BF COMPONENT1 Discrete IR Code (Component1 Input Selection) D4 COMPONENT2 Discrete IR Code (Component2 Input Selection) CE HDMI1 Discrete IR Code (HDMI
EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel.
EXTERNAL CONTROL DEVICE SETUP RS-232C configurations Set ID Set ID number. 7-Wire Configuration (Serial female-female NULL modem cable) PC OPTION TV ꔂ Move ꔉ Enter • Language RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 73 D-Sub 9 • Caption : Off • Power Indicator • Initial Setting • Set ID :1 • Mode Setting : Home Use ꔉ ꔀ 1 Press MENU to access the main menus.
EXTERNAL CONTROL DEVICE SETUP Communication Parameters Stop bit: 1 bit yy Communication code: ASCII code yy Use a crossed (reverse) cable. yy Baud rate: 9600 bps (UART) yy Data length: 8 bits yy Parity : None yy Command reference list COMMAND1 COMMAND2 DATA (Hexadecimal) k a 00 - 01 12. OSD Select k l 00 - 01 02. Input Select x b (See p.76) 13. Remote Control Lock Mode k m 00 - 01 03. Aspect Ratio k c (See p.76) 14. Treble k r 00 - 64 04. Screen Mute k d 00 - 01 15.
EXTERNAL CONTROL DEVICE SETUP 75 Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the set is controlled.
EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, set will send the Acknowledge after power on processing completion.
EXTERNAL CONTROL DEVICE SETUP 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set.
EXTERNAL CONTROL DEVICE SETUP * Table List (Channel Tuning) 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 Reserved 3 2 1 0 Step 0 Main 0 Two 0 Use x 0 0 0 0 NTSC Air 1 Sub 1 One 1 No Use x 0 0 0 1 NTSC Cable x 0 0 1 0 ATSC Air x 0 0 1 1 ATSC Cable_std x 0 1 0 0 ATSC Cable_hrc x 0 1 0 1 ATSC Cable_irc x 0 1 1 0 ATSC cable_auto x 0 1 1 1 Reserved x x x x x ...
The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service.
