ENGLISH LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS 3 2 L B 5 R* * 3 7 L B 5 R* * 4 2 L B 5 R* * 4 7 L B 5 R* * 5 2 L B 5 R* * PLASMA TV MODELS 4 2 P B 4 R* * 5 0 P B 4 R* * Please read this manual carefully before operating your TV Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information To your dealer when requiring service.
ACCESSORIES Owner’s Manual INPU MEN 1 5 LIVE R RAT IO SIM PIP PLINK PR P PIP IP PR + TV EX IT MA FAV/ RK PR MEN U IG PO W ER HT M O T V DE DV D VC R I/II INPU T *Lightly wipe any stains or finger- LI ST MA TIM CH E IN E TI SH ME IFT 6 BR TE X SW T AP PIP LIVE TV prints on the surface of the TV with the polishing cloth. EX IT OK 9 Q.
CONTENTS CONTENTS A C C E S S O R I E S .....................................................1 PREPARATION Home Menu......................................................................4 Front Panel Controls..................................................... 5 Back Panel Information ................................................ 7 Stand Installation........................................................... 9 Attaching the TV to a Wall .........................................
TIME SETTING Watching PIP(Picture-in-Picture)..............................81 Picture Size (Aspect Ratio)Control .........................83 Preset Picture Settings - Picture Mode-Preset............................................85 - Auto Colour Temperature Control(Warm/Medium/Cool) ..86 Manual Picture Adjustment - Picture Mode-User option.................................87 - Colour Temperature - User option..................88 - Picture Improvement Technology...................89 Demo ...................
PREPARATION HOME MENU This menu is a contents guide. In Home Menu, you enter the Recorded list of TIME MACHINE, Manual Recording of TIME MACHINE, Schedule List ,Photo List, Music List, Movie List or TV Menu. PREPARATION TIME MACHINE INPUT TV INPUT MODE TV POWER Home DVD BRIGHT Free Space RATIO VCR HIGH SIMPLINK TEXT PIP PIP PR- PIP PR+ I/II 19h 03m NORMAL 32h 36m SWAP PIP INPUT Recorded TV G p.
FRONT PANEL CONTROLS ■ ■ This is a simplified representation of the front panel. Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth. PREPARATION Plasma TV Models Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the TV is switched on. • illuminates orange when the TV is switched off during recording.
PREPARATION LCD TV Models PREPARATION PR PROGRAMME VOL VOLUME OK OK MENU MENU INPUT INPUT /I Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the TV is switched on. • illuminates orange when the TV is switched off during recording.
BACK PANEL INFORMATION ■ This is a simplified representation of the back panel. Image shown may differ from your TV. Plasma TV Models AV V IN 2 USB AV IN 2 USB S-Video Input Connect S-Video S-VIDEO out from an S-VIDEO device. S-VIDEO 1 2 3 USB VIDEO L/MONO AUDIO R 9 Audio/Video Input Connect audio/video output from an external device to these jacks.
USB IN PREPARATION S-VIDEO VIDEO L/MONO AUDIO R USB IN PREPARATION USB IN LCD TV Models S-VIDEO MONO AUDIO R VIDEO L/MONO VIDEO L/MONO AUDIO R S-VIDEO 1 S-Video Input Connect S-Video out from an SVIDEO device. AV IN 2 Audio/Video Input Connect audio/video output from an external device to these jacks.
STAND INSTALLATION (Only 32/37LB5R**) 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV. PREPARATION ■ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.
PREPARATION PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER. You should purchase necessary components to fix the TV to the wall on the market. Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage.
BACK COVER FOR WIRE ARRANGEMENT Plasma TV models Grip the C A B L E M A N A G E M E N T and push the cover upwards PREPARATION 1 CABLE MANAGEMENT 2 Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.
PREPARATION LCD TV models PREPARATION 1 Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. 2 Reinstall the C A B L E M A N A G E M E N T as shown CABLE MANAGEMENT How to remove the cable management Hold the C A B L E M A N A G E M E N T with both hands and pull it upward. ! NOTE G Do not use the CABLE MANAGEMENT to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
■ ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. EARTHING Power Supply Circuit breaker PREPARATION Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
■ USB IN PREPARATION To prevent damage do not connect to the mains outlet until all connections are made between the devices. S-VIDEO USB IN For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the LCD TV models. HD RECEIVER SETUP Connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the TV.
EXTERNAL EQUIPMENT SETUP Connecting with a HDMI cable HDMI/DVI IN 1 Connect the HDMI output of the digital set-top box to the H D M I / D V I I N 1 or H D M I I N 2 jack on the TV. HDMI IN 1 2 VIDEO AUDIO 1 EXTERNAL EQUIPMENT SETUP 2 Select HDMI1/DVI or HDMI2 input source using the I N P U T button on the remote control. 2 COMPONENT IN 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
Connecting with a HDMI to DVI cable RGB IN 2 VIDEO AUDIO 1 2 COMPONENT IN 1 VARIABLE AUDIO OUT AUDIO (RGB/DVI) AV IN 1 AV OUT ANTENNA IN 2 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the TV. 2 Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the TV. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVD SETUP Connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. 1 2 EXTERNAL EQUIPMENT SETUP 2 Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O jacks on the TV. 3 Turn on the DVD player, insert a DVD. AUDIO VIDEO COMPONENT IN 1 4 Select Component1 input source using the I N P U T button on the remote control.
Connecting with an S-Video cable 1 Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV. S-VIDEO VIDEO L R ANT OUT OUTPUT SWITCH Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. 3 Turn on the DVD player, insert a DVD. 4 Select AV2 input source using the I N P U T button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP Connecting the HDMI cable Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the TV. 2 Select HDMI1/DVI or HDMI2 input source using the I N P U T button on the remote control. EXTERNAL EQUIPMENT SETUP 1 HDMI IN 1 2 VIDEO AUDIO 1 2 3 Refer to the DVD player's manual for operating instructions. COMPONENT IN 1 NOTE G G 20 HDMI/DVI IN TV can receive the video and audio signal simultaneously with using a HDMI cable.
VCR SETUP To avoid picture noise (interference), allow adequate distance between the VCR and TV. ■ Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.
EXTERNAL EQUIPMENT SETUP Connecting with a RCA cable S-VIDEO L VIDEO R OUTPUT SWITCH ANT IN ANT OUT EXTERNAL EQUIPMENT SETUP RGB IN 1 2 VIDEO AUDIO RGB(PC) 1 2 COMPONENT IN VARIABLE AUDIO OUT AUDIO (RGB/DVI) V IN 1 AV R AUDIO L/MONO L/ MONO VIDEO HDMI IN RS-232C IN (CONTROL&SERVICE) HDMI/DVI IN AV OUT 1 ANTENNA IN 1 V I D E O jacks between TV and VCR.
Connecting with a S-Video cable S-VIDEO VIDEO L R ANT OUT OUTPUT SWITCH USB IN Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 4 Select AV2 input source using the I N P U T button on the remote control. S-VIDEO AV IN 2 1 ANT IN 2 EXTERNAL EQUIPMENT SETUP 2 Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set EXTERNAL EQUIPMENT SETUP 24 L R USB IN VIDEO VIDEO L/MONO AUDIO R S-VIDEO 1 AV IN 2 1 V I D E O jacks between TV and external equipment. Match the jack colours. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select AV2 input source with using the I N P U T button on the remote control. If connected to A V I N 1, select AV1 input source.
AV OUTPUT SETUP AV OUT The TV has a special signal output capability which allows you to hook up the second TV or monitor. AV V OUT OUT AV 2 See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings. ANTENNA IN EXTERNAL EQUIPMENT SETUP 1 Connect the second TV or monitor to the TV’s AV OUT jacks. 1 ! NOTE G Component, RGB, HDMI input sources cannot be used for AV out. G We recommend to use the AV OUT jacks for VCR recording.
EXTERNAL EQUIPMENT SETUP USB IN SETUP USB IN 1 S-VIDEO L/MONO MONO AUDIO R VIDEO L/ EXTERNAL EQUIPMENT SETUP 26 or AV IN 2 1 Connect the USB device to the U S B I N jacks on the side of TV. 2 After connecting the U S B I N jacks, you use the T I M E M A C H I N E function. (G p .
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable RGB IN 2 VIDEO AUDIO 1 2 COMPONENT IN VARIABLE AUDIO OUT 1 RGB OUTPUT 1 AUDIO (RGB/DVI) AV IN 1 AV OUT ANTENNA IN 2 EXTERNAL EQUIPMENT SETUP 1 RGB(PC) R AUDIO L/MONO VIDEO HDMI IN RS-232C IN (CONTROL&SERVICE) HDMI/DVI IN AUDIO Connect the RGB output of the PC to the R G B ( P C ) jack on the TV.
EXTERNAL EQUIPMENT SETUP Connecting with a HDMI to DVI cable RGB IN EXTERNAL EQUIPMENT SETUP 1 2 VIDEO AUDIO RGB(PC) 1 2 COMPONENT IN VARIABLE AUDIO OUT 1 DVI-PC OUTPUT AUDIO (RGB/DVI) AV IN 1 R AUDIO L/MONO VIDEO HDMI IN RS-232C IN (CONTROL&SERVICE) HDMI/DVI IN AV OUT ANTENNA IN 2 AUDIO 1 Connect the DVI output of the PC to the H D M I / D V I I N 1 jack on the TV. 2 Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the TV. 3 Turn on the PC and the TV.
Supported Display Resolution (RGB/HDMI[PC]mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.469 70.08 640x480 31.469 37.500 59.94 75.00 800x600 37.879 46.875 60.31 75.00 1024x768 48.363 56.476 60.023 60.00 70.06 75.02 1280x768 47.693 59.99 1360x768 47.700 60.00 1366x768 47.700 60.00 1280x1024 64.00 60.00 1920x1080 66.59 59.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Auto Configure (RGB mode only) LIST Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT EXTERNAL EQUIPMENT SETUP VOL Auto configure FAV/ MARK TIME SHIFT PR MUTE This function is for automatic adjustment of the screen position, clock, and phase.
Adjustment for screen Phase, Clock, Position LIST If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT TIME SHIFT To correct the screen size, adjust C l o c k. VOL PR MUTE This function works in the following mode : RGB, COMPONENT (480p/576p/720p/1080i/1080p), HDMI (480p/576p/720p/1080i/1080p).
EXTERNAL EQUIPMENT SETUP Selecting Wide XGA mode LIST To view a normal picture, match the resolution of RGB mode and selection of XGA mode. TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT TIME SHIFT This function works in the following mode: RGB mode. EXTERNAL EQUIPMENT SETUP VOL FAV/ MARK PR MUTE 1 2 3 SETUPO Picture Mode G Colour Temperature PICTURE AUDIOO 1 Press the M E N U button and then use D / select the PICTURE menu. 2 Press the G button and then use D / Screen.
Initializing (Reset to original factory settings) LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the MENU button and then use D / select the PICTURE menu. E button to 1 2 3 4 5 6 SETUPO Picture Mode G Colour Temperature PICTURE AUDIOO Advanced Aspect Ratio OPTIONO Picture Reset TIME MACHINEO Screen Demo TIMEO 2 Press the G button and then use D / E button to select EXTERNAL EQUIPMENT SETUP This function operates in current mode.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the TV on from standby or off to standby. INPUT TV INPUT MODE TV POWER TV INPUT Returns to the TV viewing from any mode. Switches the TV on from standby. DVD BRIGHT SIMPLINK INPUT If you press the button once, the input source OSD will appear on screen as shown.
MODE Selects the remote operating modes. INPUT TV INPUT MODE TV POWER 3 DVD TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. BRIGHT VCR RATIO 3 SIMPLINK TEXT PIP PIP PR- PIP PR+ I/II SWAP PIP INPUT SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(G p . 4 8) I/II Selects the sound output.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV INPUT TV INPUT POWER MODE TV DVD When your TV is turned on, you will be able to use its features. BRIGHT RATIO SIMPLINK VCR TEXT PIP PIP PR- PIP PR+ 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. The OSD mainly use pictures for the Plasma TV models. 1 Press the M E N U button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to a higher level menu by pressing the O K or M E N U button.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR + / - or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this TV.
MANUAL PROGRAMME TUNING Manual programme lets you manually tune and arrange the stations in whatever order you desire. LIST TIME MACHINE LIVE TV EXIT MENU It is not possible to use this function with TimeShift Mode On . 1 2 Press the M E N U button and then D / SETUP menu. Press the G button and then D / Tuning. E button E button to select the to select Manual 4 Press the F / G button or NUMBER buttons to select the desired programme number (0 to 99).
WATCHING TV / PROGRAMME CONTROL FINE TUNING Normally fine tuning is only necessary if reception is poor. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL 1 Press the M E N U button and then D / the SETUP menu. WATCHING TV / PROGRAMME CONTROL 2 Press the G button and then D / Manual Tuning. E 3 Press the G button and then D / E 4 Press the F / sound.
ASSIGNING A STATION NAME You can assign a station name up to five characters to each programme number. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL 1 Press the M E N U button and then D / the SETUP menu. E 3 Press the G button and then D / Name. E PR MUTE button to select 1 2 3 4 5 6 7 8 9 SLEEP 0 Q.VIEW SETUP G Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Favourite Prog.
WATCHING TV / PROGRAMME CONTROL BOOSTER In some models, B o o s t e r is an optional function. Only a TV with B o o s t e r can perform this function. LIST LIVE TV TIME MACHINE EXIT MENU If reception is poor select B o o s t e r to On. OK TIME SHIFT VOL TIME SHIFT FAV/ MARK PR MUTE WATCHING TV / PROGRAMME CONTROL 1 Press the M E N U button and then D / the SETUP menu. E 1 2 3 4 5 6 SETUP G Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Favourite Prog.
PROGRAMME EDIT RATIO This function enables you to delete or skip stored programmes. You can also move some channels to other programme numbers or copy a blank channel data into the selected programme number. SIMPLINK VCR TEXT PIP I/II PIP PR- PIP PR+ SWAP PIP INPUT LIST LIVE TV It is not possible to use this function whilst recording a programme. TIME MACHINE EXIT MENU 1 Press the M E N U button and then D / the SETUP menu. 2 Press the G button and then D / Programme Edit.
WATCHING TV / PROGRAMME CONTROL FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. INPUT TV INPUT Repeatedly press the F A V button to select stored favourite programmes. RATIO MODE TV POWER DVD BRIGHT 1 Press the M E N U button and then D / SETUP menu.
CALLING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT A Displaying programme List VOL Press the L I S T button to display the Programme List menu. FAV/ MARK TIME SHIFT PR MUTE 2 3 One programme list contains ten programmes as shown. 4 5 6 7 8 9 SLEEP 0 Q.VIEW SIZE POSITION INDEX ! NOTE a. You may find some blue programmes.
WATCHING TV / PROGRAMME CONTROL INPUT SOURCE SELECTION INPUT TV INPUT Selects a label for each input source which is not in use when you press I N P U T button. MODE TV POWER DVD BRIGHT RATIO SIMPLINK VCR TEXT PIP SWAP PIP INPUT LIST LIVE TV TIME MACHINE EXIT MENU TIME SHIFT WATCHING TV / PROGRAMME CONTROL 1 Press the M E N U button and then use D / to select the OPTION menu. E button 2 Press the G button and then use D / select Input Label.
KEY LOCK The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. LIST TIME MACHINE OK TIME SHIFT This TV is programmed to remember which option it was last set to even if you turn the TV off. LIVE TV EXIT MENU VOL FAV/ MARK TIME SHIFT PR MUTE 1 E 3 5 6 button to select 2 Press the G button and then D / Lock. E button to select Key 3 Press the G button and then D / Off.
WATCHING TV / PROGRAMME CONTROL This fundtion operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. BRIGHT RATIO SIMPLINK VCR TEXT PIP I/II PIP PR- PIP PR+ SWAP PIP INPUT LIST LIVE TV This TV might not function properly when using it with other products with HDMI-CEC function. TIME MACHINE This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
SIMPLINK Functions Disc playback Control connected AV devices by pressing the D / E / F / G, O K buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.(The button does not provide such functions) Direct Play After connecting AV devices to theTV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it.
TIME MACHINE TIMESHIFT MODE(PAUSE & REPLAY OF LIVE TV) This function allows the unit to automatically record live TV and make it available for viewing at any time. LIST TIME MACHINE LIVE TV EXIT MENU With the TimeShift Mode turned on, you may pause and rewind normal TV viewing at any time without missing any of the live broadcast. OK TIME SHIFT (TimeShift Mode and Recording functions may not work if the signal strength is weak.
Using the TimeShift Mode function LIVE 1 1 2 3 4 The ‘Progress Bar’? After selecting TimeShift Mode On, press the O K button. This function indicates what TIME MACHINE reviewing is possible,a current on-screen and live ■ 2 broadcasting position. 1 Status of current displayed video. 2 Current save time. 15 minute intervals from TimeShift Mode start 3 time. (Total - one hour). 4 Indicates current TimeShift Mode position.
TIME MACHINE Using the TimeShift Mode function, play - When in timeshift mode, the following options are available. LIST DELAYED DELAYED OK TIME SHIFT ■ LIVE TV EXIT Indicates that the current broadcast and displayed video differ. Play TIME MACHINE MENU TIME SHIFT When pressing the O button delaying Timeshift, Timeshift is dumped. And delayed time is recording.
FORMAT HARD DISK Erases all programmes and initializes the hard disk. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 2 3 4 5 6 SETUPO TimeShift Mode PICTURE O Record Quality AUDIOO Recorded TV TIMEO Schedule List Press the M E N U button and then use D / E button to select the TIME MACHINE menu. 1 OPTIONO Manual Record Press the G button and then use D / E button to select HDD Format. HDD Format DivX Reg.
TIME MACHINE INSTANT RECORDING Use this function to record the programme you are watching on the main screen. Instant Record This function records the currently displayed programme. 1 Select the programme you wish to record and then press the O button. During recording is displayed. Use this feature to record up to 2 hours of programming. REC 2 If you wish to stop recording, press the A button.
The extra recording time added to the existing setting equals the final recording time. Recording Option Recording Time 00:00 00:00~02:00 After adjusting the recording time, select O K. The Status bar will be displayed. 4 Set Duration OK (0 Min Recorded) No Change Cancel Stop Record Total recording duration 3 REC Elapsed recording time Press the E X I T button to hide the Status bar. Press the O K button to display the Status bar.
TIME MACHINE MANUAL RECORD LIST This function is easy to register to reserved recording. TIME MACHINE LIVE TV EXIT MENU This function is also available in TIME MACHINE menu. OK TIME SHIFT TIME SHIFT When Manual Recording,the default sound of the set is stored. FAV/ MARK VOL PR MUTE TIME MACHINE 1 TIME MACHINE Press the T I M E M A C H I N E button to display H o m e menu. Use the D / E button to select the M a n u a l R e c o r d and then use the O K or G button.
SCHEDULE LIST This function is used to show scheduled recordings. This function is also available in the TIME MACHINE menu. TIME MACHINE Home You can store up to 8 programmes. Free Space HIGH 19h 03m NORMAL 32h 36m Recorded TV Manual Record Schedule List 1 Press the T I M E M A C H I N E button to display H o m e menu. Use the D / E button to select the Schedule L i s t and then use the O K or G button.
TIME MACHINE TO USE THE USB DEVICE Precautions when using the USB device Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recognition programme may not be recognized. G A USB storage device which uses its own driver may not be recognized. G In case of a card reader, up to four memory cards are concurrently recognizable.
To use the recorded list with USB storage device 1 Connect the USB device to the U S B I N jacks on the side of TV. ■ USB IN Only USB HDD that are over 40 GB and 1 partition can be used for USB Backup.
TIME MACHINE RECORDED TV PROGRAMME LIST LIST You can view the recorded programme list at a glance. This function is also available in the TIME MACHINE menu. Press the T I M E M A C H I N E button to display H O M E menu. Use the D / E button to select Recorded TV and then use the O K or G button.
Recorded programme Selection and Popup Menu LIST LIVE TV TIME MACHINE EXIT MENU The recorded programme stored in the internal HDD or the USB storage device can be played. OK OK TIME SHIFT TIME SHIFT The preview recorded list is shown above. VOL FAV/ MARK PR MUTE 1 Use the P R + / - button for page up/down navigation. Recorded Recorded TV 2 HIGH 11h 24m NORMAL 22h 46m Use D / E button to navigation the appropriate Recorded programme, then press the O K button to open the Pop-up Menu.
TIME MACHINE When 'Yes’ is selected, the backup is cancelled and is converted back to input mode. If more than two files are transferred, the transferred file is stored, and the backup operations on the files in progress of transferring and scheduled for backup are cancelled. ■ When ‘No’ is selected, returns to the backup process screen. ■ While backup is being performed in the background, the status of the copy progress can be checked by pressing the ‘OK’ button.
USB BACKUP - When the Recorded List is stored exceeding the capacity of the internal HDD, the USB backup feature allows the backup of Recorded List of the internal HDD to the external HDD for backup connected through USB. - To use USB backup function, be sure to initialize the USB HDD using TIME OK MACHINE menu- USB HDD format. - To use USB Backup, USB HDD is necessary more than 40 GB, 1 partition disk, and FAT32 system.
TIME MACHINE G Copy to Recorded List :Restores the Recorded Programme to the internal HDD. USB backup is started. Copying to Recorded List (1/1) 75% Close ■ Stop if you press the A button, this message is displayed. Do you really want to cancel the backup? Yes No When 'Yes’ is selected, the backup is cancelled and is converted back to input mode.
Playing recorded programmes - You can play a selected programme from the recorded programme list. The ‘Progress Bar’? 1 Play a recorded programme. 2 While playing, You will see a playback screen as shown below. ■ To stop displaying the recorded programmes icon, press the EXIT button. PLAYING PLAYING 1 2 3 4 5 6 This function indicates what TIME MACHINE reviewing is possible ,a current on-screen and live broadcasting position, a section of section-recording.
TIME MACHINE PHOTO LIST LIST TIME MACHINE LIVE TV EXIT MENU It’s available to playback the photo file(*.jpg) in the USB device. OK OK TIME SHIFT TIME SHIFT The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. VOL FAV/ MARK PR Supports up to four drives. MUTE PHOTO(*.JPEG) supporting file Baseline: width<=4800, height is no limit • You can play JPEG files only. • Only baseline scan is supported among JPEG.
Photo Selection and PopUp Menu As shown, up to 6 thumbnail photos are listed per page. Photo List Page 2/3 No Marked USB Device Drive1 1 Use D / E / F / G buttons to select the target folder or drive then press O K . UP Folder Folder File 1. jpg File 4. jpg File 3. jpg 2 3 Use the P R + / - button to navigation in the thumbnail photo page. Navigation OK Move Page File 5. jpg Mark Exit 1 Photo List Page 2/3 2 3 No Marked TIME MACHINE Use the M A R K button to mark or unmark a photo.
TIME MACHINE Set up the menu in Full-Sized Screen Photo List You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. Page 2/3 No Marked USB Device Drive1 UP Folder Folder File 1. jpg File 4. jpg File 3. jpg Menu 1 Use D / E / F / G buttons to select the target folder or drive then press O K . Navigation OK Move Page File 2. jpg File 5.
G G Option : Set values for Slide Speed and Music folde r. Use F / G button to select Option and press O K button. ■ Use F / G button and O K button to set values. Then go to and press O K to save the settings. ■ You cannot change M u s i c F o l d e r while BGM is playing. 6 Use D / E / F / G button to select the previous or next photo. Use D / E / F / G button to select and control the menu on the full-sized screen. 7 Use E X I T button to go back to the photo list from the fullsized screen.
TIME MACHINE MUSIC LIST Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. LIST TIME MACHINE OK LIVE TV EXIT MENU OK TIME SHIFT TIME SHIFT Supports up to four drives. VOL TIME MACHINE MUSIC(*.
Music Selection and PopUp Menu As shown , up to 8 music titles are listed per page. Music List 1 Use D / E / F / G buttons to select the target folder or drive then press O K . Page 1/1 No Marked USB Device Drive1 UP Folder Use the P R + / - button to navigation in the music titles page. 3 Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked musics will be played in sequence.
TIME MACHINE ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. ! NOTE TIME MACHINE 72 When music is playing, is displayed in front of the music title. G A damaged or corrupted music does not play but displays 00:00 in playtime.
MOVIE LIST LIST The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. Editing such as delete and add is not allowed. It is a movie list that displays folder information and Divx file. Supports up to four drives. TIME MACHINE LIVE TV EXIT MENU OK OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE TIME MACHINE MOVIE(*.avi/*.
TIME MACHINE Movie Selection and PopUp Menu 1 Use D / E / F / G buttons to select the target folder or drive then press O K . Movie List Page 1/1 No Marked USB Device Drive1 UP Folder 2 Use the P R + / - button to navigation in the movie titles page. 3 Use M A R K button to mark or unmark a movie. When one or more movie files are marked, the marked movies will be played in sequence.
QURAN The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. Screen Components ■ Press the T I M E M A C H I N E button and then use the D / E button to select the Quran menu. TIME MACHINE TIME MACHINE Home Free Space HIGH 19h 03m NORMAL 32h 36m Recorded TV 1 2 Manual Record Schedule List Photo List Music List Movie List 3 Quran TV Menu Menu Navigation Popup Menu Move Page Exit 4 1 Displays the selected chapter name.
Quran Selection and Pop-up Menu 1 Use the D / E / F / G button to select a desired chapter and then press the O K button. Use the P R + / - button to move between Quran chapter pages. Menu 2 Navigation Popup Menu Move Page Exit 1 Use the D / E / F / G button to select a desired verb and then press the O K button to display the pop-up window. ■ Use the button to move to an upper folder. Play TIME MACHINE Cancel 3 Play the selected verb. Press the S T O P button to stop playing the verb.
Bookmark Selection 1 Select the Bookmark button to display the bookmark list. 2 Use D / E / F / G button to select a desired bookmark and then press the O K button to play the selected Quran. ■ Press the E X I T button to move to the previous screen.
Playing Quran - you can play a selected verb from the bookmark list. The ‘Progress Bar’? 1 Play a verb. 2 While playing the verb, you will see a playback screen as shown below. ■ To stop displaying the verb, press the E X I T button. PLAYING PLAYING 1 2 3 4 5 TIME MACHINE Using the remote control You can shift to any point on the playback screen within the verb. When playing, FF / GG repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF -> FFFFF ->FFFFFF .
SUBTITLE Turns the subtitle control during movie play. LIST TIME MACHINE OK TIME SHIFT VOL 1 2 PR SETUPO PICTURE O Press the G button to start Subtitle. 3 5 6 Record Quality Recorded TV TIMEO Schedule List TIME MACHINE G 2 4 TimeShift Mode AUDIOO OPTIONO 1 Manual Record HDD Format DivX Reg. Code 4 Press the D / E / F / G button to select the desired subti- USB Backup USB HDD Format tle option. Menu Prev.
TIME MACHINE DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.
PICTURE CONTROL WATCHING PIP(PICTURE-IN-PICTURE) It’s not available to use this function on recording programme. INPUT TV INPUT MODE TV POWER DVD PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image.
PICTURE CONTROL Input Source Selection for Sub Picture Press the P I P I N P U T button to select the input source for the sub picture. Each press of P I P I N P U T button is pressed, each input source for the sub picture is displayed. Sub Picture Size Adjustment (PIP mode only) PICTURE CONTROL Press the S I Z E button to adjust the sub picture size. With S I Z E button in PIP mode, sub picture is adjusted. Moving the Sub Picture (PIP mode only) Press the P O S I T I O N button.
PICTURE SIZE (ASPECT RATIO)CONTROL You can watch the screen in various picture formats; 1 6 : 9, O r i g i n a l, 4 : 3, 1 4 : 9 , Z o o m 1 / 2 and J u s t S c a n ( 4 7 / 5 2 L B 5 R* * o n l y ). INPUT TV INPUT MODE TV POWER DVD BRIGHT RATIO If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
PICTURE CONTROL • Zoom1 The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. Zoom1 • J u s t S c a n ( 4 7 / 5 2 L B 5 R* * o n l y ) Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. DE • Zoom2 Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped.
PRESET PICTURE SETTINGS Picture Mode-Preset I n t e l l i g e n t E y e Adjusts picture according to the surrounding conditions.(LCD TV models only) Dynamic Select this option to display a sharp image. Standard The most general and natural screen display status. Mild Select this option to display a mild image. User 1/2 Selection this option to use a user defined setting.
PICTURE CONTROL Auto Colour Temperature Control(Warm/Medium/Cool) To initialize values (reset to default settings), select the Cool option. LIST OK VOL E FAV/ MARK TIME SHIFT PR MUTE This menu is activated after selecting “User1” or “User2” in the Picture Mode. Press the M E N U button and then D / the PICTURE menu. LIVE TV EXIT TIME SHIFT Choose one of three automatic colour adjustments.
MANUAL PICTURE ADJUSTMENT Picture Mode-User option Contrast Brightness Colour Sharpness Tint Adjusts the difference between light and dark levels in the picture. Increases or decreases the amount of white in the picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels. Press the M E N U button and then D / the PICTURE menu.
PICTURE CONTROL Colour Temperature - User option To adjust red, green, blue to any colour temperature you prefer. LIST TIME MACHINE It is possible to use this function in “User1” or “User2” of Picture mode only. LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the M E N U button and then D / the PICTURE menu.
- PICTURE IMPROVEMENT TECHNOLOGY XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. LIST It is not possible to use this function in RGB/HDMI-PC mode. 1 Press the MENU button and then D / the PICTURE menu. E Press the G button and then D / E button to select XD. 3 Press the G button and then D / Auto or Manual.
PICTURE CONTROL DEMO Use it to see the difference between XD Demo on and XD Demo off. LIST TIME MACHINE LIVE TV EXIT MENU It is not possible to use this function in RGB/HDMI-PC mode. OK TIME SHIFT FAV/ MARK VOL TIME SHIFT PR MUTE 1 Press the MENU button and then D / the PICTURE menu.
ADVANCED - CINEMA To set the TV up for the best picture quality for viewing films. LIST LIVE TV TIME MACHINE EXIT MENU This feature operates only in Analog TV, AV and Component 480i/576i mode. OK TIME SHIFT VOL TIME SHIFT FAV/ MARK PR MUTE 1 Press the M E N U button and then D / E Press the G button and then D / 2 3 4 5 6 SETUPO Picture Mode G Colour Temperature PICTURE button to select AUDIOO Advanced Aspect Ratio OPTIONO Picture Reset TIME MACHINEO Screen Demo the PICTURE menu.
PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL When you view a film this function adjust the TV to best picture quality. LIST LIVE TV TIME MACHINE EXIT MENU This function works in the following mode: AV (NTSC-M) or HDMI. OK TIME SHIFT VOL TIME SHIFT FAV/ MARK PR MUTE 1 Press the M E N U button and then D / the PICTURE menu. 2 Press the G button and then D / Advanced. E Press the G button and then D / Level.
PICTURE RESET Returns to the default factory setting for Picture Mode, Colour Temperature, XD, Advanced and Aspect Ratio. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 2 3 4 5 6 SETUPO Picture Mode G Colour Temperature PICTURE 1 Press the G button and then D / E E Advanced TIMEO Aspect Ratio OPTIONO Picture Reset TIME MACHINEO Screen Demo button to select button to select Picture Reset. Menu Prev.
PICTURE CONTROL IMAGE STICKING MINIMIZATION(ISM) METHOD A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT TIME SHIFT It is not possible to use this function in LCD models. VOL White wash White wash removes permanent images from the screen.
LOW-POWER PICTURE MODE This function allows you to reduce the power consumption of the TV. LIST TIME MACHINE LIVE TV EXIT MENU It is not possible to use this function in LCD models. OK TIME SHIFT 1 Press the M E N U button and then D / select the OPTION menu. E button to 2 Press the G button and then D / Low Power. E button to select 3 Press the G button and then D / On or Off. E button to select 4 Press the E X I T button to return to TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 2 3 Press the M E N U button and then D / the AUDIO menu. E 1 2 3 4 5 6 button to select Press the G button and then D / Volume. E button to select Auto Press the G button and then D / Off.
PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; SRS TSXT, Standard, Music, Movie or Sports and you can also adjust the frequency of the equalizer. LIST TIME MACHINE Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE Adjusting the audio equalizer. LIST TIME MACHINE OK TIME SHIFT VOL 1 2 Press the M E N U button and then D / the AUDIO menu. Press the G button and then D / Sound Mode. E E LIVE TV EXIT MENU FAV/ MARK TIME SHIFT PR MUTE button to select button to select 1 2 3 4 5 6 SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO 0 OPTIONO TIME MACHINEO 3 Press the G button and then D / 4 Press the G button.
BALANCE You can adjust the sound balance of the speakers to the preferred levels. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 2 Press the M E N U button and then D / the AUDIO menu. Press the G button and then D / E E button to select 2 3 4 5 6 SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO button to select- Balance. 1 0 OPTIONO TIME MACHINEO Menu Prev. 1 Press the G button and then F / desired adjustment.
SOUND & LANGUAGE CONTROL TV SPEAKER ON/OFF SETUP You can adjust the internal speaker status. LIST In AV, COMPONENT, RGB and HDMI mode, internal speaker audio can be operational even when there is no video signal. TIME MACHINE OK TIME SHIFT If you want to use your external hi-fi stereo system, turn off the internal speakers of the TV. LIVE TV EXIT MENU VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the M E N U button and then D / the AUDIO menu.
I/II Stereo/Dual Reception INPUT TV INPUT MODE TV POWER DVD BRIGHT RATIO When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the clarity of sound is improved.
SOUND & LANGUAGE CONTROL NICAM Reception If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received as by pressing the I/II button repeatedly. 1 When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O. 2 When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
ON-SCREEN MENU LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. LIST TIME MACHINE OK TIME SHIFT VOL 1 Press the M E N U button and then use D / OPTION menu. E LIVE TV EXIT MENU FAV/ MARK TIME SHIFT PR button to select the MUTE 2 Press the G button and then use D / Language. E button to select 3 Press the G button and then use D / desired language.
TIME SETTING CLOCK SETUP You must set the time correctly before using on/off timer function. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 TIME SETTING 104 Press the M E N U button and then D / the TIME menu. 2 Press the G button and then D / Clock. E 3 Press the G button and then F / the year, date, or time option.
AUTO ON/OFF TIMER SETTING The Off time function automatically switches the TV to standby at a preset time. LIST TIME MACHINE LIVE TV EXIT MENU Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. OK TIME SHIFT Once the on time/off time is set, these functions operate daily at the preset time. 2 Press the G button and then D / On/Off Time.
TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. INPUT TV INPUT DVD BRIGHT RATIO SIMPLINK VCR TEXT PIP Press the S L E E P button repeatedly to select the number of minutes. The display ‘ - - -Min ’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
AUTO SHUT-OFF SETTING If the TV set is switched on and there is no input signal, it will switch off automatically after 10 minutes. LIST TIME MACHINE LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the M E N U button and then D / the TIME menu. 2 Press the G button and then D / Sleep. E E 2 3 4 5 6 SETUPO Clock PICTUREO Off Time AUDIOO On Time Sleep Time TIME G Auto Sleep OPTIONO button to select button to select Auto 1 TIME MACHINEO Menu Prev.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group.
TELETEXT SPECIAL TELETEXT FUNCTIONS ? A REVEAL Press this button to display concealed information, such as solutions to riddles or puzzles. Press this button again to remove the information from the display. A SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. A UPDATE Displays the TV picture on the screen while waiting for a new teletext page.
APPENDIX TROUBLESHOOTING The TV set does not operate properly Check to see if there is any object between the product and the remote control causing obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Correct remote operating mode set: TV, VCR etc.? ■ Install new batteries. ■ The remote control does not work Power is suddenly turned off Is the sleep timer set? ■ Check the power control settings. Has the Power supply been interrupted. ■ Is Auto sleep activated on this station.
APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Press the V O L ( o r V o l u m e ) button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust B a l a n c e in menu option.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to swith the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) 806.6 x 552.3 x 97.2 mm 31.8 x 21.7x 3.8 inches 927 x 630x 88 mm 36.5x 24.8 x 3.5 inches 1033.4 x 686.8 x 88.5 mm 40.7 x 27.0 x 3.5 inches 15.3 kg / 33.7 lbs 12.5 kg / 27.6 lbs 21 kg / 46.3 lbs 17 kg / 37.5 lbs 25.4 kg / 56.0 lbs 20 .9kg / 46.1 lbs AC100-240V~ 50/60Hz AC100-240V~ 50/60Hz with stand with stand without stand Power requirement AC100-240V~ 50/60Hz 47LB5R** 52LB5R** 47LB5REC-TB 52LB5REC-TB 1144.5 x 825.
MODELS Dimensions (Width x Height x Depth) Weight 50PB4R** 42PB4RTC-TB 50PB4RTC-TB with stand 1130.0 x 768.1 x 310.4 mm 44.5 x 30.2 x 12.2 inches 1308.0 x 906.1 x 370.0mm 51.5 x 35.7 x 14.6 inches without stand 1130.0 x 715.0 x 85.0 mm 44.5 x 28.1 x 3.3 inches 1308.0x 845 x 89.5 mm 51.5 x 33.2 x 3.5 inches with stand 31.05kg / 68.5 lbs 27.05kg / 59.6lbs 42.72kg / 94.2 lbs 38.02kg / 83.
APPENDIX PROGRAMMING THE REMOTE CONTROL The remote control is a multi brand or universal remote. It can be programmed. to operate most remote controlled devices from other manufacturers. Note that the remote control may not control all models from other brands. Programming a code into a remote mode 1 Testing your remote control.
VCR Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027 035 101 153 010 045 026 034 137 150 015
APPENDIX IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
Code (Hexa) TV POWER INPUT RATIO BRIGHTNESS + BRIGHTNESS SIMPLINK PIP TEXT I/II PIP PR-(RED) PIP PR+(GREEN) SWAP(YELLOW) PIP INPUT(CYAN) TIME MACHINE STOP(A) TIME MACHINE PLAY(G) TIME MACHINE PAUSE(II) TIME MACHINE REC(O) IFF FF GG GGI MENU LIST TIME MACHINE LIVE TV EXIT UP(D) DOWN(E) LEFT(F) RIGHT(G) OK( ) VOL + VOL PR + PR FAV/MARK MUTE Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 Number Key 0 SLEEP Q.
APPENDIX EXTERNAL CONTROL DEVICE SETUP It’s not available to use this function in TIME MACHINE mode. Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. RS-232C connection cables are not supplied with the TV.
RS-232C Configurations Please make sure the RS-232C configuration below. If you use different kind of RS-232C cable, system error may occur. 3-Wire Configurations RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID SETUPO Language PICTUREO Input Label AUDIOO SIMPLINK Key Lock TIMEO ISM Method OPTION G Low Power TIME MACHINEO Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’1. See page p .
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) APPENDIX 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07. Brightness 08. Colour 09. Tint 10. Sharpness 11. OSD Select 12. Remote control lock mode 13. PIP/DW 14.
01. Power (Command 2 : a) G To control Power On/Off of the 05. Volume Control (Command 2 : f) TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack 1 : Power On [a][ ][Set ID][ ][OK][Data][x] G To show Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * In like manner, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function. 02.
APPENDIX 10. Sharpness (Command 2 : k) G To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 125. Ack 14. PIP Position (Command2:q) G To select sub picture position for PIP. You can also adjust the sub picture position using POSI-TION button on the remote control or in the PIP/DW menu.
19. Blue Adjustment (Command 2 : $) G To adjust blue in colour temperature. 22. ISM Method (Command 1 : j, Command 2 : p) Transmission G To control the ISM method. You can also adjust ISM [k][$][ ][Set ID][ ][Data][Cr] Method in OPTION menu. It is not possible to sue this function with LCD TV models. Transmission Data Min : 0 ~ Max : 50 * Refer to ‘Real data mapping 2’. See page 125. Ack [$][ ][Set ID][ ][OK][Data][x] 20 .
APPENDIX 25. K e y (Command1:m, Command2:c) 27. PIP Input select (Command1:x, Command2:y) G To send IR remote key code. G To adjust input source for sub picture in PIP mode Transmission Transmission [m][c][ ][Set ID][ ][Data][Cr] [x][y][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 119.
