Owner's Manual

CONNECTIONS & SETUP

NOTE

If the digital set-top box has a DVI output and no HDMI output, a separated audio connection is neces-

sary.

If the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will

be automatically set to 1280x720p.

If the digital set-top box does not support Auto DVI, you need to set the output resolution appropriate-

ly. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p.

DIGITAL AUDIO OUTPUT

Connect one end of an optical cable to the

TV Digital Audio Optical Output port.

Connect the other end of the optical cable to

the digital audio optical input on the audio

equipment.

See the external audio equipment instruction

manual for operation.

When connecting with external audio equip-

ments, such as amplifiers or speakers, please

turn the TV speakers off. (Refer to p.60)

DIGITAL AUDIO

OUT

OPTICAL

1(DVI)

RS-232C IN

(CONTROL(CONTROL

SERVICE)

HDMI IN

- Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output Optical port.

CAUTION

Do not look into the optical output port. Looking at the laser beam may damage your

vision.

Back panel of the set