LCD TV OWNER’S MANUAL LCD TV MODELS 26LC7D 26LC7DC 32LC4D 42LC4D Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
9 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PICTURE CONTROL SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 42 Preset Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 - EZ Picture - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 - Color Tone - Preset. . . . . . . . . . . . . . . . . . . .
TIME SETTING Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION FEATURE OF THIS TV LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio.
PREPARATION ACCESSORIES IN PU T PO W RA TIO CO PIC ER MO DE TV MP TU RE 1 DV HD D MI 1 SO VC RG UN R B-P D C AD SIM JU PLIN ST K * EX CC IN PU TV T IT ME NU SA EN TE R IN PU T P CO PIC RE 1 HD UN D L FAV MU TE 2 CC IT ME NU SA 3 5 6 8 EN TE R 9 0 D VC RG R B-P C SIM PLIN ST K AD JU * CH EX 4 7 Owner's Manual MO DE DV MI 1 SO 1 ER TV MP TU VO PO W RA TIO TIM ER PREPARATION Ensure that the following accessories are included with your product.
PREPARATION FRONT PANEL INFORMATION PREPARATION ■ Here shown may be somewhat different from your TV. ■ NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).
PREPARATION Front Panel Controls (32/42 inches) R CH CHANNEL (D,E)Buttons VOL VOLUME (F,G)Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks green and then illuminates green before the picture is displayed.
PREPARATION BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV.
COMPONENT IN Connect a component video/audio device to these jacks. 2 AV OUT Connect a second TV or monitor. 3 AV (Audio/Video) IN 1 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. 4 ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. 5 DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. PREPARATION 1 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT as shown. CABLE MANAGEMENT 3 Bundle the cables using the supplied TWIST HOLDER. ! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.
ATTACHING THE TV TO A WALL ■ PREPARATION We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. Insert the TV brackets and bolts to tighten the product to the wall as shown in the picture.
PREPARATION STAND INSTALLATION (Only 26/32 inches LCD TV models) PREPARATION 14 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Securely install the 4 bolts provided.
VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. PREPARATION 26/32 inches 42 inches 200 mm R R 600 mm 100 mm 400 mm ! NOTE G Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide. ( ) ( ) DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall.
PREPARATION ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) R PREPARATION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use picture for the 42 inches models. ■ HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. 1.
EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the digital set-top box to H D M I / D V I I N 1 or H D M I I N 2 jack on the set. SERVICE 2 RGB IN (PC) No separated audio connection is necessary. HDMI supports both audio and video. REMOTE AUDIO IN (RGB/DVI) CONTROL HDMI IN ANTENNA/ CABLE IN 2 2. How to use ■ ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
When connecting HDMI to DVI cable AUDIO ANTENNA/ CABLE IN AV OUT REMOTE AUDIO IN (RGB/DVI) CONTROL IN HDMI IN 2 HDMI/DVI IN 1 DVI-DTV OUTPUT RS-232C IN (CONTROL & SERVICE) DIGITAL AUDIO OUT (MONO) S-VIDEO VIDEO AUDIO AV IN 1 OPTICAL 1 2 L EXTERNAL EQUIPMENT SETUP RGB IN (PC) COMPONENT IN VIDEO SERVICE R 1. How to connect 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the set.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect VIDEO AUDIO AV OUT 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the set. (MONO ) S-VIDEO VIDEO 1 ■ Turn on the DVD player, insert a DVD.
When connecting with an S-Video cable AUDIO 1. How to connect 1 S-VIDEO L Connect the S-VIDEO output of the DVD to the S - V I D E O input on the set. 1 2 Turn on the DVD player, insert a DVD. ■ ■ Select A V 1 input source by using the I N P U T button on the remote control. If connected to A V I N 2, select A V 2 input source. ■ Refer to the DVD player's manual for operating instructions. OPTICAL DIGITAL AUDIO OUT (MONO) S-VIDEO VIDEO AUDIO UDIO AV IN 1 ■ AV OUT 2.
EXTERNAL EQUIPMENT SETUP VCR SETUP ( VIDEO ) AUDIO To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
( VIDEO When connecting with a RCA cable 1. How to connect 1 ANT IN S-VIDEO ANT OUT OUTPUT SWITCH L R VIDEO AUDIO ■ ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select A V 1 input source by using the I N P U T button on the remote control. If connected to A V I N 2, select A V 2 input source. OPTICAL (MONO) DIGITAL AUDIO OUT S-VIDEO VIDEO AUDIO AV IN 1 ■ N AV OUT 2.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder 1. How to connect V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) VIDEO ■ Select A V 2 input source by using the I N P U T button on the remote control. ■ If connected to A V I N 1 input, select A V 1 input source. ■ Operate the corresponding external equipment. S-VIDEO 1 AV IN 2 24 L 2.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. RGB IN (PC) When connecting D-sub 15pin cable REMOTE AUDIO IN (RGB/DVI) CONTROL IN HDMI IN 2 1 Connect the RGB output of the PC to the R G B I N ( P C) jack on the set. HDMI/DVI IN 2 OPTICAL 1 RS-232C IN (CONTROL & SERVICE) DIGITAL AUDIO OUT Connect the PC audio output to the A U D I O I N ( R G B / D V I) jack on the set. 1 2 2. How to use ■ Turn on the PC and the TV.
EXTERNAL EQUIPMENT SETUP ! NOTES EXTERNAL EQUIPMENT SETUP G To get the the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G If the video doesn’t fit the screen, try pressing the ADJUST button to adjust the screen position of TV. G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode.
Screen Setup for PC mode INPUT TV Overview Adjustment for screen Resolution, Position, Size, and Phase INPUT DVD RATIO VCR COMP1 HDMI1 RGB-PC SIMPLINK * PICTURE SOUND ADJUST CC MENU SAP EXIT Resolution EXTERNAL EQUIPMENT SETUP When the RGB input of the set is connected to a PC output, select the RGB-PC as the main input mode. When HDMI/DVI connect to PC output and select HDMI/DVI input, this function is used. After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
EXTERNAL EQUIPMENT SETUP AV OUT SETUP The TV has a special signal output capability which allows you to hook up the second TV or monitor. NT IN 1. How to connect 2 See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings. ICAL L AUDIO UT (MONO) S-VIDEO VIDEO 1 ! NOTE G Component1-2, RGB-PC, HDMI1/DVI, HDMI2, DTV input sources cannot be used for AV out. VIDEO 28 AUDIO AV IN 1 Connect the second TV or monitor to the TV’s AV OUT jacks.
DIGITAL AUDIO OUTPUT Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port. 1. How to connect Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2 Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. Set the “TV Speaker option - Off” in the AUDIO menu. (G p . 5 5). See the external audio equipment instruction manual for operation.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel. WATCHING TV / CHANNEL CONTROL INPUT External input modes rotate in regular sequence: TV, AV12, Component 1-2, RGB-PC, HDMI1/DVI and HDMI2.
MODE Select the remote’s operating mode: TV, DVD, VCR. COMP1 Directly, select Component1 input. HDMI 1 Directly, select HDMI1/DVI input. RGB-PC Directly, select RGB-PC input. PICTURE Selects the factory preset picture depend on the viewing environment. G p.44 SOUND Selects the factory preset sound for type of program. G p.52 ADJUST Adjust the screen resolution, position, size and phase. G p.27 * Not functional EXIT Clears all on-screen displays and returns to TV viewing from any menu.
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, C H (+ or -)) button on the TV or press the POWER, INPUT, TV INPUT, CH (+ or -)), Number (0~9 9 ) button on the remote control. 1 WATCHING TV / CHANNEL CONTROL Select the viewing source by using the TV INPUT, INPUT button on the remote control.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use D or E button to select the each menu. 2 Press the G button and then use D E F G button to display the available menus.
WATCHING TV / CHANNEL CONTROL CHANNEL SEARCH Auto Scan (EZ Scan) CC SAP MENU EXIT WATCHING TV / CHANNEL CONTROL Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run EZ Scan again after any Antenna/Cable connection changes. A password is required to gain access to EZ Scan menu if the Lock System is turned on.
CC Add/Delete Channel (Manual Scan) SAP MENU EXIT TIMER A password is required to gain access to Manual Scan menu if the Lock System is turned on. ENTER FAV VOL CH MUTE 2 3 EZ Scan 1 Press the M E N U button and then use D or E button to select the SETUP menu. Manual Scan Channel Edit DTV Signal Input Source Input Label 2 Press the G button and then use D or E button to select Manual Scan.
WATCHING TV / CHANNEL CONTROL CC Channel Editing MENU SAP EXIT WATCHING TV / CHANNEL CONTROL There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after EZ Scan on the SETUP menu. A Custom List can be created by toggling each channel on or off with ENTER button.
DTV SIGNAL STRENGTH This feature displays the DTV signal levels being received and indicates whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. DTV Signal: This function is only available when the input signal is DTV or CADTV. CC MENU SAP EXIT TIMER ENTER FAV VOL CH 1 1 2 3 EZ Scan Press the M E N U button and then use D or E button to select the S E T U P menu.
WATCHING TV / CHANNEL CONTROL INPUT SOURCE SELECTION Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. CC MENU SAP EXIT TIMER ENTER FAV VOL CH WATCHING TV / CHANNEL CONTROL MUTE 1 2 3 EZ Scan 1 Press the M E N U button and then use to select the S E T U P menu. D or E button Manual Scan Channel Edit DTV Signal Input Source Input Label 2 Press the G button and then use select I n p u t S o u r c e .
INPUT LABEL Sets a label to each input source which is not in use when you press the INPUT button. CC SAP MENU EXIT TIMER ENTER FAV VOL CH 1 2 3 EZ Scan 1 Press the M E N U button and then use D or E button to select the S E T U P menu. Manual Scan Channel Edit DTV Signal Input Source Input Label 2 Press the G button and then use D or E button to select I n p u t L a b e l.
WATCHING TV / CHANNEL CONTROL VCR RATIO COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST This operates only for the devices with the logo. Please check the logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want S i m p L i n k menu, select O f f.
SimpLink Functions D i r e c t P l a y : After connecting AV devices to TV, you can directly control the devices and play media without additional settings. ■ S e l e c t A V d e v i c e : Enables you to select one of AV devices connected to TV and play it.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL INPUT TV This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.
Zoom 1 16:9 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. 16:9 Zoom 1 The screen size is, more enlarged at both sides, to create a spectacular view. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.
PICTURE CONTROL PRESET PICTURE SETTINGS INPUT TV EZ Picture - Preset INPUT DVD RATIO VCR COMP1 HDMI1 EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. D a y l i g h t, N o r m a l, N i g h t T i m e Settings are preset for the optimum picture quality at the factory and are not adjustable. In the U s e r 1 and U s e r 2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
Color Tone - Preset CC MENU SAP EXIT TIMER Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. ENTER FAV VOL CH MUTE 1 2 3 PICTURE CONTROL EZ Picture 1 Press the M E N U button and then use to select the V I D E O menu. D or E button Color Temperature XD Advanced Video Reset 2 Press the G button and then use select C o l o r T e m p e r a t u r e.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT EZ Picture - User Mode CC MENU EXIT SAP TIMER Adjust the picture appearance to suit your preference and viewing situations. ENTER FAV VOL CH MUTE 1 2 3 PICTURE CONTROL EZ Picture 1 Press the M E N U button and then use to select the V I D E O menu. D or E button Color Temperature XD Advanced Video Reset 2 Press the G button and then use select E Z P i c t u r e.
Color Tone - User Mode CC MENU EXIT SAP TIMER You can also adjust the detailed settings (Red, Green, Blue) by selecting the C o l o r T e m p e r a t u r e - U s e r menu. ENTER FAV VOL CH MUTE 1 D or E 3 PICTURE CONTROL 1 Press the M E N U button and then use to select the V I D E O menu. 2 EZ Picture button Color Temperature XD Advanced Video Reset 2 Press the G button and then use select C o l o r T e m p e r a t u r e.
PICTURE CONTROL XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically changed to Auto. When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD color and XD Noise.
ADVANCED - CINEMA 3:2 PULL DOWN MODE Set up the TV for the best picture appearance for viewing movies. CC MENU SAP EXIT When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in Analog, AV1, AV2, and Component 480i mode. TIMER ENTER FAV VOL CH MUTE 1 Press the M E N U button and then use to select the V I D E O menu.
PICTURE CONTROL ADVANCED - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV1, AV2, HDMI1/DVI, or HDMI2mode. CC MENU SAP EXIT TIMER ENTER FAV VOL CH MUTE 1 PICTURE CONTROL 1 Press the M E N U button and then use to select the V I D E O menu. D or E 2 3 EZ Picture button Color Temperature XD Advanced Video Reset 2 Press the G button and then use select A d v a n c e d.
PICTURE RESET Use to quickly reset all the Video menu options to their original factory preset values. CC MENU SAP EXIT TIMER ENTER FAV VOL CH MUTE 1 2 3 PICTURE CONTROL EZ Picture 1 Press the M E N U button and then use to select the VIDEO menu. D or E button Color Temperature XD Advanced Video Reset 2 Press the G button and then use select Video Reset. D or E button to 1 3 Press the G button to reset the Video menu options to original values.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (EZ SOUND) INPUT TV EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Normal, Stadium, News, Music and Theater are preset for good sound quality at the factory and are not adjustable. When you select the Stadium or Theater, the AUDIO menuBalance option is disabled and the Balance option is set to 0 automatically.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Audio Language 1 Press the M E N U button and then use to select the A U D I O menu. D or E button EZ Sound Balance TV Speaker 2 Press the G button and then use select E Z S o u n d.
SOUND &LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. CC MENU EXIT SAP TIMER ENTER FAV VOL CH MUTE 1 2 3 Audio Language 1 Press the M E N U button and then use D or E button to select the A U D I O menu. EZ Sound Balance SOUND & LANGUAGE CONTROL TV Speaker 2 Press the G button and then use D or E button to select B a l a n c e. 1 3 Press the G button and then use F or G button to make appropriate adjustments.
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. CC MENU EXIT SAP TIMER ENTER FAV VOL CH MUTE 1 1 2 3 Audio Language Press the M E N U button and then use D or E button to select the A U D I O menu. EZ Sound Balance 2 Press the G button and then use D or E button to select T V S p e a k e r. 3 Press the G button and then use D or E button to select O n or O f f.
SOUND &LANGUAGE CONTROL STEREO/SAP BROADCASTS SETUP This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. CC MENU EXIT SAP TIMER ENTER FAV VOL CH MUTE 1 2 3 Audio Language 1 Press the M E N U button and then use D or E button to select the A U D I O menu. EZ Sound Balance 2 Press the G button and then use D or E button to select A u d i o L a n g u a g e.
SOUND &LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. CC MENU SAP EXIT TIMER ENTER FAV VOL CH MUTE 1 2 3 Aspect Ratio 1 Press the M E N U button and then use D or E button to select the O P T I O N menu. Caption/Text Caption Option SOUND & LANGUAGE CONTROL Language SimpLink 2 Press the G button and then use D or E button to select L a n g u a g e .
CAPTION / TEXT INPUT TV Analog Broadcasting System Captions VCR RGB-PC SIMPLINK CC MENU EXIT * SAP TIMER ENTER Use the C C button repeatedly to select Caption O f f, C C 1, C C 2, C C 3, C C 4, T e x t 1, T e x t 2, T e x t 3 or T e x t 4. CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.
SOUND &LANGUAGE CONTROL Digital Broadcasting System Captions CC MENU SAP EXIT TIMER Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. ENTER FAV VOL CH MUTE 1 1 2 3 Aspect Ratio Press the M E N U button and then use D or E button to select the O P T I O N menu.
CAPTION OPTION Customize the DTV/CADTV captions that appear on your screen. CC MENU SAP EXIT TIMER ENTER FAV VOL CH MUTE 1 2 3 Aspect Ratio Press the M E N U button and then use D or E button to select the O P T I O N menu. 1 Caption/Text Caption Option Language Press the G button and then use D or E button to select C a p t i o n O p t i o n. 2 1 Press the G button and then use F or G button to select C u s t o m.
TIME SETTING CLOCK SETTING Auto Clock Setup CC MENU The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. The factory default value of the Auto Clock is Off, because a clock information sent each broadcasting station is different.
Manual Clock Setup CC SAP MENU EXIT TIMER If the current time setting is wrong, reset the clock manually. ENTER FAV VOL CH MUTE 1 1 Press the M E N U button and then use to select the T I M E menu. D or E 2 3 Auto Clock button Manual Clock Off Timer On Timer Sleep Timer Press the G button and then use select M a n u a l C l o c k. 3 Press the G button and then use F or G button to select either the year, date, or time option.
TIME SETTING AUTO ON/OFF TIMER SETTING The timer function operates only if the current time has been set. The Off-Timer function overrides the On-Timer function if they are both set to the same time. The TV must be in standby mode for the On-Timer to work. If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode. CC TIMER ENTER FAV VOL CH MUTE 1 1 Press the M E N U button and then use to select the T I M E menu.
SLEEP TIMER SETTING INPUT TV The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. MODE TV POWER INPUT DVD RATIO VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST CC MENU EXIT * SAP TIMER ENTER 1 Press the T I M E R button repeatedly to select the number of minutes. First the O f f option appears on the screen, followed by the following sleep timer options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
TIME SETTING AUTO SHUT-OFF SETTING If set to on and there is no input signal, the TV turns off automatically after 10 minutes. CC MENU SAP EXIT TIMER ENTER FAV VOL CH MUTE 1 2 3 Auto Clock 1 Press the M E N U button and then use D or E button to select the T I M E menu. Manual Clock Off Timer On Timer Sleep Timer Auto Off TIME SETTING 2 Press the G button and then use D or E button to select A u t o O f f. 1 3 Press the G button and then use D or E button to select O n or O f f.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
PARENTAL CONTROL /RATINGS Set Password Change the password by inputting a new password twice. For USA After inputting the password, use the D or E button to choose S e t p a s s w o r d. 1 Press the G button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the C o n f i r m. Then your changed password has been memorized. 2 Press E X I T to return to TV viewing or press M E N U to return to the previous menu.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Lock System Set Password Block Channel 1 After inputting the password, use the to choose B l o c k C h a n n e l. D or E button G Selection ( G or ) leads you to the block channel screen. Movie Rating TV Rating-Children TV Rating-General Input Block 2 Press the G button. You will now see a screen filled with channel numbers and a preview picture.
PARENTAL CONTROL /RATINGS MOVIE & TV RATING Movie Rating (MPAA) - for USA only CC MENU SAP EXIT Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. Lock System Set Password Block Channel Movie Rating 1 2 TV Rating-Children After inputting the password, use the D or E button to choose T V R a t i n g - C h i l d r e n.
PARENTAL CONTROL /RATINGS TV Rating English - for CANADA only Selecting canadian english language rating system. 1 After inputting the password, use the choose T V R a t i n g - E n g l i s h. D or E Lock System button to Set Password Block Channel TV Rating-English 2 Press the G button and then use the D or E button to select E , C , C 8 +, G , P G, 1 4 +, 1 8 +, or B l o c k i n g O f f.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
APPENDIX The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS ■ The specifications shown above may be changed without prior notice for quality improvement. 26LC7D (26LC7D-UB) 26LC7DC (26LC7DC-UB) MODELS Including stand 42LC4D (42LC4D-UA) 31.8 x 23.8x 9.8 inches 40.7 x 29.5 x 11.3 inches 676.5 x 531.0 x 221.0mm 806.8 x 605.6 x 249.0mm 1032.7 x 750.0 x 287.6 mm Dimensions (Width x Height x Depth) 26.6 x 20.9x 8.7 inches 32LC4D (32LC4D-UA) Excluding stand 26.6 x 18.8 x 3.3 inches 31.8 x 21.6 x 3.1 inches 40.7 x 27.0x 3.
PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button.
APPENDIX Remote Control Code VCR Brand AIWA AKAI APPENDIX 78 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Brand
DVD Brand Codes APEX DIGITAL 022 DENON 020 GE 005 HARMAN KARDON JVC 012 LG 001 MAGNAVOX 013 MARANTZ 024 014 006 027 010 016 025 Brand Codes Brand Codes MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN 002 023 008 003 013 004 021 005 RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 011 007 005 019 009 010 017 009 026 006 015 006 008 018 016 025 006 APPENDIX 79
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
Code (Hexa) Function Note TV INPUT Remote control Button 0B INPUT Remote control Button 08 POWER Remote control Button (Power On/Off) 79 RATIO Remote control Button 0E TIMER Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (Dash) Remote control Button 1A BACK Remote control Button 09 MUTE Remote control Button 02 VOL + Remote control Button 03 VOL - Remote control Button 00 CH + Remote control Button 01 CH - Remote control Button 1E FAV Remote
APPENDIX EXTERNAL CONTROL THROUTH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232 control hardware and software. The instructions below are provided to help with programming software or to test functionallity using telenet software.
RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS 3-Wire Configurations (Not standard) TXD RXD GND DSR DTR CTS RTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS Set ID TXD RXD GND DTR DSR RTS CTS CC SAP MENU EXIT Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’. G p.85.
APPENDIX Command Reference List COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal) 0~1 11. Sharpness k k 0 ~ 64 b 0~9 12. OSD Select k l 0~1 c (G p.85) 13. Remote Control k d 0~1 Lock Mode k m 0~1 05. Volume Mute k e 0~1 14. Treble k r 0 ~ 64 01. Power k a 02. Input Select k 03. Aspect Ratio k 04. Screen Mute 06. Volume Control k f 0 ~ 64 15. Bass k s 0 ~ 64 07. Contrast k g 0 ~ 64 16. Balance k t 0 ~ 64 17.
0 1 . Power (Command2:a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * In this model, TV will send the Acknowledge after power on processing completion. * There might be a time delay between command and acknowledgement. 02.
APPENDIX 10. Tint (Command2:j) To adjust the screen tint. You can also adjust tint in the Video menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 0 ~ Green : 64 To adjust balance. You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. G p.85. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x] *Refer to ‘Real data mapping’. G p.85.
Data5: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 3 2 1 0 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved Reserved Reserved 0 Main 0 Two 0 Use x 0 0 0 0 1 1 One 1 No Use x 0 0 0 1 x 0 0 1 0 x 0 0 1 1 x 0 1 0 0 x 0 1 0 1 x 0 1 1 0 x 0 1 1 1 The table above lists the binary code which must be converted to Hexadecimal before sending.