OWNER’S MANUAL * LED TV * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. LN54** LP36** LP62** www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 INSTALLATION PROCEDURE 28 LICENSES 3 ASSEMBLING AND PREPARING 28 OPEN SOURCE SOFTWARE NOTICE 3 6 7 8 9 9 9 12 13 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall Tidying cables 29 IR CODES 30 EXTERNAL CONTROL DEVICE SETUP 13 MAKING CONNECTIONS 14 14 15 15 16 16 17 17 17 18 18 18 18 19 19 20 Antenna connection HDMI connection DVI to HDMI
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future. The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING ENGLISH ENG Remote control and batteries (AAA) (See p.21, 22) Owner’s manual Cable holder (Depending on model) (See p.13) Power Cord (Depending on model) Stand Screws 3EA, M5 x 25 4EA, M4 x 14 (Only 60LN54**, 42LN549D) (See p.9) Stand Screws 7EA, M4 x 14 (Only 32/42/47/55LN549C, 32/42/47/55LN549E, LP36**, LP62**) (See p.9) Desk-mount Screw (See p.10) Power cable holder/ bolt (See p.13) or Stand Body / Stand Base (See p.9) Isolator (Depending on model) (See p.
ASSEMBLING AND PREPARING 5 1. Connect to TV. Wall ANTENNA/ CABLE IN Cable / Antenna or Isolator 2. Connect to Set-Top box. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. “Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard.
ASSEMBLING AND PREPARING ENGLISH ENG Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons Screen Buttons OK SETTINGS INPUT Speakers Remote control sensor Power indicator Button Description H Scrolls through the saved programmes. HAdjusts H S H 7 the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menu, or saves your input and exits the menus. Changes the input source. Turns the power on or off.
ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. Image shown may differ from your TV.
ASSEMBLING AND PREPARING ENGLISH ENG Attaching the TV to a table Adjusting the angle of the TV to suit view (Only 39/42/47LN549C, 39/42/47LN549E, 42/47LP36**, 42/47/55LP62**) Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
ASSEMBLING AND PREPARING 11 1 2 3 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm 10 cm 10 cm Make sure to use screws and wall mount bracket that meet the VESA standard.
ASSEMBLING AND PREPARING / MAKING CONNECTIONS 2 Secure the power cord with the Power Cable Holder/ Bolt. Gather and bind the cables with the Cable Holder. This section on MAKING CONNECTIONS mainly uses diagrams for the LN54** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
MAKING CONNECTIONS Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use. USB IN HDMI connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). ANTENNA/ CABLE IN IN 3 ENGLISH ENG Antenna connection / DVI IN 1 2 NOTE yy Use a signal splitter to use more than 2 TVs.
MAKING CONNECTIONS Component connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect. It does not matter which port you use. (Only LP62**, LN549E) Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown.
MAKING CONNECTIONS ENGLISH ENG Composite connection RGB-PC connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown. Transmits the video signal from PC to the TV. To transmit an audio signal, connect an audio cable.
MAKING CONNECTIONS External speaker out You may use an optional external audio system instead of the built-in speaker. Connecting External Speaker. (Only LP36**, LN549C, LN549D) NOTE yy If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off. Digital optical audio connection Transmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
MAKING CONNECTIONS ENGLISH ENG Speaker output setup Network Connection Connect the external speaker to the Speaker output(STEREO) jack on the TV. Connecting to a Wired Network (Only LP62**, LN549E) UP Control port for Speaker out DOWN (Only LP62**) This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication. (Image shown may differ from your TV.
MAKING CONNECTIONS Wireless Dongle This TV can be connected to wireless network via the Wireless Dongle port. After making the physical connection, the TV needs to be set up for network communication. Connect the wireless dongle to the Wireless Dongle port on the TV. (Image shown may differ from your TV.) Headphone connection Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone.
MAKING CONNECTIONS Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the My media menu to use various multimedia files.
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. ENGLISH ENG REMOTE CONTROL or CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL ENGLISH ENG (Only LP62**, LN549E) (POWER) Turns the TV on or off. ENERGY AV MODE ꕊ ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption. INPUT AV MODE Selects an AV mode. INPUT Changes the input source. TV/ RAD SAVING 1 2 3 TV/RAD Selects Radio, TV and DTV programme. Number buttons Enters numbers. 4 5 6 LIST Accesses the saved programme list. Q.VIEW Returns to the previously viewed programme. 7 8 9 FAV Accesses your favourite programme list.
MAINTENANCE / TROUBLESHOOTING 23 ENGLISH ENG MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
CAUTION FOR USING EZSIGN ENGLISH ENG CAUTION FOR USING EZSIGN Only LN549E yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy Do not remove a USB drive while data is being copied. It can corrupt the data and EzSign may not work properly. While loading a USB device or dongle, your TV may function slower than normal. Some user-created subtitles may not work properly. Some special characters are not supported in subtitles. HTML tags are not supported in subtitles.
SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. MODELS 32LP36** 42LP36** 47LP36** 32LP360H-TA 42LP360H-TA 47LP360H-TA Dimensions (W x H x D) With stand (mm) 738.0 x 497.0 x 207.0 968.0 x 629.0 x 236.0 1080.0 x 694.0 x 264.0 Without stand(mm) 738.0 x 449.0 x 79.0 968.0 x 579.0 x 79.0 1080.0 x 642.0 x 80.5 Weight With stand (kg) 7.0 10.
SPECIFICATIONS ENGLISH ENG Environment condition Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Digital TV New Zealand, Singapore Television System Programme Coverage Australia Television System Programme Coverage Indonesia, Israel, Television System Myanmar, Sri Lanka Programme Coverage Vietnam, Malaysia Television System Programme Coverage Iran, Algeria, Tunisia, Digital model Television System
SPECIFICATIONS HDMI/DVI-DTV supported mode HDMI/DVI-DTV supported mode Horizontal Vertical Frequency (kHz) Frequency (Hz) Resolution Horizontal Vertical Frequency (kHz) Frequency (Hz) 720x480 31.469 31.5 59.94 60 720x480 31.47 31.5 59.94 60 720x576 31.25 50 1280x720 1280x720 37.5 44.96 45 50 59.94 60 44.96 45 59.94 60 1920x1080 1920x1080 33.72 33.75 28.125 26.97 27 33.716 33.75 56.25 67.43 67.5 59.94 60 50 23.97 24 29.976 30.00 50 59.94 60 33.75 33.72 26.97 27 33.75 67.432 67.
LICENSES / OPEN SOURCE SOFTWARE NOTICE ENGLISH ENG LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
IR CODES ENGLISH ENG IR CODES yy This feature is not available for all models. Code (Hexa) 08 Function Note (POWER) TV/RAD Remote control Button (Power On/Off) F0 39 SUBTITLE Remote control Button 30 AV MODE Remote control Button 79 0B 10-19 53 1A RATIO INPUT Number Key 0-9 LIST Q.
EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/ V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
EXTERNAL CONTROL DEVICE SETUP 31 yy yy yy yy Baud rate: 9600 bps (UART) Data length: 8 bits Parity : None Stop bit: 1 bit ENGLISH ENG Communication Parameters yy Communication code: ASCII code yy Use a crossed (reverse) cable. Command reference list (Depending on model) 01. Power k 02. Aspect Ratio k 03. Screen Mute k a c d DATA (Hexadecimal) 00 to 01 (See p.33) (See p.33) 04. Volume Mute k e 00 to 01 05. Volume Control k f 00 to 64 06. Contrast k g 00 to 64 07.
EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] [Command 2] [Set ID] [DATA] [Cr] [ ] : First command to control the TV.(j, k, m or x) : Second command to control the TV. : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
EXTERNAL CONTROL DEVICE SETUP 33 04. Volume Mute (Command: k e) ►► To control Power On/Off of the set. ►► To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To show Power On/Off.
EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 09. Tint (Command: k j) 14. Bass (Command: k s) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. ►► To adjust bass. You can also adjust bass in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping’. See p.35. Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.35.
EXTERNAL CONTROL DEVICE SETUP ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. 23. Input select (Command: x b) (Main Picture Input) ►► To select input source for main picture. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01: To set Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure Ack [u][ ][Set ID][ ][OK/NG][Data][x] 19. Tune Command (Command: m a) MSB LSB 0 0 ►► Select channel to following physical number.
(Only 42LN549D for India) This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR. Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.