Operation Manual

15
ENGLISH
15
MAKING CONNECTIONS
Adapter connection
1 Connect the antenna cable to the antenna
input port on the TV.
2 Connect the DC adapter plug to the power
input jack on the TV.
3 Connect the power cord to the DC adapter
first, then plug the power cord into the wall
power outlet.
DC IN
DC Adapter
External speaker out
Connecting External Speaker.
R+
R -
L -
L+
EXTERNAL
SPEAKER OUT
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y
If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
y
An antenna cable and converter are not
supplied.
y
Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
NOTE
y
Make sure when connecting External
Speaker that TV is Power OFF.
(Only 22/26LT36**)
ANTENNA/
CABLE IN