LED TV LX320* LX330* LX530* www.lg.
i
1 1 2 3 4 a / b 1 2
H/P OUT 2 (MHL) IN USB IN 2 A-1 LX320*, LX330* A B
H/P OUT 2 (MHL) IN 1 2 A-2 LX530*
B LX330*, LX530* LAN IN (MHEG / SERVICE) 1 EXTERNAL SPEAKER OUT OPTICAL DIGITAL AUDIO OUT AV (RGB) RS-232C IN (CONTROL & SERVICE) AUDIO IN (COMPONENT/RGB/DVI) LNB Satellite COMPONENT IN RGB IN (PC) COMPONENT IN AUDIO IN (COMPONENT/RGB/DVI) AUDIO IN (COMPONENT/RGB/DVI) GND RIGHT LEFT GND L VIDEO R AUDIO LX330*, LX530* ANTENNA/ CABLE IN
B LX330*, LX530* LAN IN (MHEG / SERVICE) 1 EXTERNAL SPEAKER OUT OPTICAL DIGITAL AUDIO OUT AV (RGB) RS-232C IN (CONTROL & SERVICE) AUDIO IN (COMPONENT/RGB/DVI) LX330*, LX530* LNB Satellite COMPONENT IN RGB IN (PC) ANTENNA/ CABLE IN
English GND RIGHT LEFT UP DOWN Česky KOSTRA PRAVÝ LEVÝ ZESÍLIT ZESLABIT Ovládací port výstupu pro reproduktor Español TIERRA DERECHA IZQUIERDA ARRIBA ABAJO Puerto de control para salida de altavoz Français GND DROITE GAUCHE HAUT BAS Port de contrôle pour sortie haut-parleur Deutsch GND RECHTS LINKS Oben Unten Steueranschluss für Lautsprecherausgang Ελληνικά ΓΕΙΩΣΗ ΔΕΞΙΑ ΑΡΙΣΤΕΡΑ ΕΠΑΝΩ ΚΑΤΩ Θύρα ελέγχου για την έξοδο ηχείων Italiano GND DESTRA SINISTRA SU GIÙ Po
3 4 1 2 1 2 3 4 3 4 :D epending on model / / В зависимост от модела / Závisí na modelu / Selon le modèle / Abhängig vom Modell / Ανάλογα με το μοντέλο / Típusfüggő / In base al modello / Zależnie od modelu / Dependendo do modelo / În funcţie de model / В зависимости от модели / U zavisnosti od modela / Ovisno o modelu / Odvisno od modela / En función del modelo / Modele bağlı olarak değişkenlik gösterebilir / Залежно від моделі
5
A F E B G1 G2 D C 32LX320C-ZA 32LX320H-ZA 42LX320C-ZA 42LX320H-ZA 32LX330C-ZA 32LX330H-ZA 42LX330C-ZA 42LX330H-ZA 42LX530S-ZA A x B x C (mm) 732 x 481 x 207 961 x 612 x 218 732 x 481 x 207 961 x 612 x 218 961 x 612 x 218 A x E x F (mm) 732 x 437 x 55.5 961 x 567 x 55.5 732 x 437 x 55.5 961 x 567 x 55.5 961 x 567 x 55.5 D (kg) 6.2 9.5 6.2 9.5 9.5 6.0 9.2 6.0 9.2 9.
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Safety instructions ENGLISH Please read these safety precautions carefully before using the product.
Des ENGLISH Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
ENGLISH If any of the following occur, unplug the product immediately and contact your local service centre. • The product has been impacted by shock • The product has been damaged • Foreign objects have entered the product • The product produced smoke or a strange smell This may result in fire or electric shock. Never Disassemble the AC adapter or power cord. This may result in fire or electric shock. CAUTION Install the product where no radio wave occurs.
When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet.
ENGLISH Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time. Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
Maintenance CAUTION ENGLISH • Do not use any unapproved items to ensure the safety and product life span. • Any damage or injuries caused by using unapproved items are not covered by the warranty. • Some models have a thin film attached on to the screen and this must not be removed. • When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. • Make sure that the screws are fastened completely.
Using the joystick button Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. (Image shown may differ from your TV.) • It is recommended to move the TV in the box or packing material that the TV originally came in. • Before moving or lifting the TV, disconnect the power cord and all cables. • When holding the TV, the screen should face away from you to avoid damage.
Adjusting the Menu ENGLISH When the TV is turned on, press the joystick button one time. You can adjust the Menu items moving the joystick button up, down, left or right. Turns the power off. Clears on-screen displays and returns to TV viewing. Changes the input source. Adjusting the angle of the TV to suit view (This feature is not available for all models.) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ Accesses the main menu.
Securing the TV to a wall B type) (This feature is not available for all models.) ENGLISH 2-Screws for Stand Fixing, 2-Washers for Stand Fixing, 2-Nuts for Stand Fixing (Supplied with TV) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
CAUTION 10 cm 10 cm ENGLISH 10 cm 10 cm Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
• When installing the wall mounting bracket, use the adhesive label provided. The adhesive label will protect the opening from accumulating dust and dirt. (Only when the label is provided) Provided Item How to use Dual Lock™ (Only when the item of the following form is provided) (This feature is not available for all models.) ENGLISH Fix the set-top box to the TV and use it when you want to. 1 After removing the protection paper from the Dual Lock™, stick it to the TV and the set-top box as shown.
Connections (notifications) Adapter connection (Depending on model) ENGLISH Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE • The external device connection may differ from the model.
Speaker Output Setup (Depending on model) Network setup Wired network connection ENGLISH (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication. Connect the LAN port of the Modem or Router from Pro:Centric server to the LAN port on the TV.
Remote control B Adjusts the volume level. Accesses your favourite programme list. Shows programme guide. Mutes all sounds. Scrolls through the saved programmes. Moves to the previous or next screen. (Depending on model) ENGLISH The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.
C B D A (POWER) Turns the TV on or off. Adjusts the brightness of the screen to reduce energy consumption. Selects an AV mode. Changes the input source. Selects Radio, TV and DTV programme. Number buttons Enters numbers. Accesses the saved programme list. Returns to the previously viewed programme. B Adjusts the volume level. Accesses your favourite programme list. Resizes an image. Mutes all sounds. Scrolls through the saved programmes. PAGE Moves to the previous or next screen.
ENGLISH Licenses Troubleshooting Supported licenses may differ by model. For more information about licenses, visit www.lg.com. The software version can be updated for improvement in performance. Customer needs to ensure the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and upload revised software version according to the guidance provided by LGE. Manufactured under license from Dolby Laboratories.
Software download information ENGLISH • Use this information for LX540S, LX530S series. You can download the SuperSign Software and manual from LG Electronics website. http://partner.lge.com Software : SuperSign W_Lite_Server_vX.X.X_Setup.zip SuperSign C_vX.X.X_Setup.zip SuperSign W_Editor_vX.X.X_Setup.zip SuperSign W_Player_vX.X.X_Setup.zip Manual : SuperSign W_Lite_Server_vX.X.X_Manual.zip SuperSign C_vX.X.X_Manual.zip SuperSign W_Editor_vX.X.X_Manual.zip SuperSign W_Player_vX.X.X_Manual.
HDMI/DVI-DTV supported mode ENGLISH Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 480 31.469 31.5 59.94 60 720 x 576 31.25 50 1280 x 720 37.5 44.96 45 50 59.94 60 1920 x 1080 28.125 33.75 33.72 56.250 67.50 67.432 27.00 26.973 33.75 33.716 50.00 60.00 59.94 50.00 60.00 59.94 24.00 23.976 30.00 29.
Supported video formats • File type : mp3 [Bit rate] 32 Kbps - 320 Kbps [Sample freq.] 16 kHz - 48 kHz [Support] MPEG1, MPEG2, Layer2, Layer3 • File Type : AAC [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] ADIF, ADTS • File Type : M4A [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] MPEG-4 • File Type : WMA [Bit rate] 128 Kbps ~ 320 Kbps [Sample freq.] 8 kHz ~ 48 kHz [Support] WMA7, WMA8, WMA9 Standard • File Type : WMA 10 Pro [Bit rate] ~ 768 Kbps [Channel / Sample freq.
Supported photo formats ENGLISH • Category : 2D (jpeg, jpg, jpe) [Available file type] SOF0: Baseline, SOF1 : Extend Sequential, SOF2 : Progressive [Photo size] Minimum : 64 x 64, Maximum : Normal Type: 15360 (W) x 8640 (H), Progressive Type : 1920 (W) x 1440 (H) • Category : BMP [Photo size] Minimum : 64 x 64, Maximum : 9600 x 6400 • Category : PNG [Available file type] Interlace, Non-Interlace [Photo size] Minimum : 64 x 64, Maximum : Interlace : 1200 x 800, Non-Interlace : 9600 x 6400 • BMP and PNG for
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
IR CODES yy This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP Type of Connector : D-Sub 9-Pin Male 1 5 ENGLISH RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE • RS-232C connection cables are not supplied with the product.
Command Reference List RS-232C Configurations (Depending on Model) 7-Wire Configurations (Standard RS-232C cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Set ID number. “Real Data Mapping”.
Transmission / Receiving Protocol (Depending on Model) ENGLISH Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) 01. Power (Command: k a) ►► To control Power On/Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On/Off. [Command 2] : Second command to control the TV.
03. Screen Mute (Command: k d) 07. Brightness (Command: k h) ►► To select screen mute on/off. ►► To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][d][ ][Set ID][ ][Data][Cr] 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04.
11. OSD Select (Command: k l) 15. Energy Saving (Command: j q) ►► To select OSD (On Screen Display) on/off when controlling remotely. ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
17. Equalizer (Command : j v) 19. Programme Add/Skip (Command: m b) ►► To adjust equalize. ►► To set skip status for the current Programme. Transmission [j][v][ ][Set ID][ ][Data][Cr] Transmission [m][b][ ][Set ID][ ][Data][Cr] LSB 0 0 0 0 0 0 0 Data 00 : Skip 0 ENGLISH MSB 01 : Add Ack [b][ ][Set ID][ ][OK/NG][Data][x] Data Frequency 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) 0 0 1 2nd Band 0 0 0 0 1 1(decimal) 0 1 0 3rd Band ... ... ... ... ... ..
22. Input select (Command: x b) (Main Picture Input) * Real data mapping ►► To select input source for main picture.
