Operation Manual

SOUND menu
SSM
Balance
AVL
SRS WOW
SOUND
Prev.
MENU
SOUND Menu
19
Stereo/Dual reception
When a programme is selected, the sound information for the sta-
tion appears after the programme number and station name disap-
pear.
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
Language selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
ton repeatedly.
DUAL I sends the primary broadcast language to the loudspeak-
ers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends a separate language to each loudspeaker.
NICAM reception
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1. When NICAM mono is received, you can select NICAM
MONO
or FM MONO.
2. When NICAM stereo is received, you can select NICAM
STEREO
or FM MONO. If the stereo signal is weak, switch to
FM mono.
3. When NICAM dual is received, you can select NICAM DUAL
I
, NICAM DUAL II or NICAM DUAL I+II or MONO.
Sound output selection
In
Component1, Component2 mode, you can select output sound for
the left and right loudspeakers.
Repeatedly press the I/II button to select the sound output.
L+R : Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the
right loud speaker.
L+L : Audio signal from audio L input is sent to left and right loud-
speakers.
R+R : Audio signal from audio R input is sent to left and right loud-
speakers.
I/II
Broadcast
Mono
Stereo
Dual
On Screen Display
MONO
STEREO
DUAL I