Operation Manual

ARC
MENU
SCREEN menu
ARC
Auto-configure
Clock
Phase
Position
SCREEN
Prev.
MENU
SCREEN Menu
Picture format
You can watch TV in various picture formats; Full, 4:3, Spectacle,
Zoom1 and Zoom2.
1. Press the MENU button and then
DD
/
EE
button to select the
SCREEN menu.
2. Press the
GG
button and then
DD
/
EE
button to select ARC.
3. Press the
GG
button and then
DD
/
EE
button to select your
desired picture format.
4. Press the MENU button to save.
You can also select Full, 4:3, Spectacle, Zoom1 or Zoom2 with
the ARC button on the remote control.
Full
When your TV receives the wide screen signal, it will lead you to
adjust the picture horizontally or vertically, in a linear proportion, to
fill the entire screen fully.
4:3
It will lead you to view a picture with an original 4:3 aspect ratio,
with gray bars appearing at both the left and right sides.
Spectacle
When your TV receives the wide screen signal, it will lead you to
adjust the picture horizontally, in a linear proportion, to fill the entire
screen.
Zoom1
Choose Zoom1 when you want to view the picture without any
alteration. However, the top and bottom portions of the picture will
be cropped.
Zoom2
Choose Zoom2 when you want the picture to be altered, both ver-
tically extended and cropped. The picture taking a halfway trade
off between alteration and screen coverage.
Note :
a. In PIP/POP/PBP mode, ARC function isn’t available.
b. In RGB, DVI modes, you can only select 1:1 and Full screen.
25
SCREEN
Prev.
MENU
ARC
GG
Auto-configure
Clock
Phase
Position
Full
4:3
Spectacle
Zoom1
Zoom2