Operation Manual

Connection of external equipment

You can connect additional equipment, such as VCRs, camcorders

etc. to your set.

Here shown may be somewhat different from your set.

Aerial socket

1. Connect the RF out socket of the VCR to the aerial socket on

the back of the set.

2. Connect the aerial cable to the RF aerial in socket of the VCR.

3. Store the VCR channel on a desired programme number using

the ‘Manual programme tuning’ section.

4. Select the programme number where the VCR channel is

stored.

5. Press the PLAY button on the VCR.

DVD input sockets

1. Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y

or Y PB PR) of the DVD to the COMPONENT 1, 2 IN sockets (Y

PB PR) of the set.

2. Connect the audio cable from the DVD to DVD INPUT AUDIO

sockets of the set.

3. Press the TV/AV or INPUT button to select Component 1, 2.

4. Press the PLAY button on the DVD.

The DVD playback picture appears on the screen.

Note :

Component1 : DTV , DVD source

Component2 : DVD source

DTV in sockets

1. Connect the SET TOP outputs to the COMPONENT1 IN sock-

ets (Y PB PR) of the set.

2. Connect the audio cable from the SET TOP to the AUDIO sock-

ets of the set.

3. Press the TV/AV or INPUT button to select Component 1.

VCR

DVD Player

Receriver