Operation Manual

Transmission / Receiving Protocol
Transmission
*
[Command 1] : First command. (j or k)
*
[Command 2] : Second command.
*
[Set ID] : You can adjust the set ID to choose
desired monitor ID number in
Special menu. Adjustment range is
1~ 99. When selecting Set ID ‘0’,
every connected TV set is con-
trolled. Set ID is indicated as deci-
mal (1~99) on menu and as Hexa
decimal (0x0~0x63) on transmis-
sion/receiving protocol.
*
[DATA] : To transmit command data.
Transmit 'FF' data to read status
of command.
*
[Cr] : Carriage Return ASCII code
‘0x0D’
*
[ ] : ASCII code Space (0x20)’
OK
Acknowledgement
* The Monitor transmits ACK (acknowledgement)
based on this format when receiving normal data.
At this time, if the data is data read mode, it indi-
cates present status data. If the data is data write
mode, it returns the data of the PC computer.
Error
Acknowledgement
* The Monitor transmits ACK (acknowledgement)
based on this format when receiving abnormal
data from non-viable functions or communication
errors.
Data 1 : Illegal Code
2 : Not supported function
3 : Wait more time
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command2][ ][Set ID][ ][OK][Data][x]
[Command2][ ][Set ID][ ][NG][Data][x]
Command Reference List
External Control Device Setup
39
COMMAND 1 COMMAND 2 DATA
(Hexadecimal)
01. Power k a 0 ~ 1
02. Input Select k b 0 ~ 8
03. Volume Mute k e 0 ~ 1
04. Volume Control k f 0 ~ 64
05. Contrast k g 0 ~ 64
06. Brightness k h 0 ~ 64
07. Color k i 0 ~ 64
08. Tint k j 0 ~ 64
09. Sharpness k k 0 ~ 64
10. PIP/PBP/POP ON/OFF k n 0 ~ 3
11. PIP Position k q 0 ~ 3
12. Balance k t 0 ~ 64
13. ACC k u 0 ~ 3
14. PIP/PBP/POP SOURCE k y 0 ~ 8