Operation Manual

01. Power On (Command : a)
G To control Power On/Off of the Set.
T
ransmission
Data 0 : Power Off 1 : Power On
Acknowledgement
G To show the status of Power On/Off.
T
ransmission
Data 0 : Power Off 1 : Power On
Acknowledgement
* The Monitor transmits ACK (acknowledgement)
based on this format when receiving normal data.
At this time, if the data is data read mode, it indi-
cates present status data. If the data is data write
mode, it returns the data of the PC computer.
02. Input Select (Command : b) (Main Picture
Input)
G To select input source for the Set.
You can also select an input source using the
INPUT button on the remote control.
T
ransmission
Acknowledgement
03. Volume Mute(Command : e)
G To control On/Off of the Volume Mute.
T
ransmission
Data 0 : Volume Mute On (Volume Off)
1 : Volume Mute Off (Volume On)
Acknowledgement
Data 0 : Volume Mute On (Volume Off)
1 : Volume Mute Off (Volume On)
04. Volume Control(Command : f)
G To control On/Off of the volume.
T
ransmission
Data Min : 00H ~ Max : 64H
(Hexadecimal code)
Acknowledgement
Data Min : 00H ~ Max : 64H
05. Contrast (Command : g)
G To adjust screen contrast.
You can also adjust the contrast in the Picture
menu.
T
ransmission
Data Min : 00H ~ Max : 64H
*
Refer to Real data mappingas shown below.
Acknowledgement
06. Brightness (Command : h)
G To adjust screen brightness.
You can also adjust the brightness in the Picture
menu.
T
ransmission
Data Min : 00H ~ Max : 64H
*
Refer to Real data mappingas shown below.
Acknowledgement
* Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 : Step 100
* Tint,Balance :-50 ~ +50
External Control Device Setup
40
[k][a][ ][Set ID][ ][Data][Cr]
[a][ ][Set ID][ ][OK][Data][x]
[a][ ][Set ID][ ][OK][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
[k][b][ ][Set ID][ ][Data][Cr]
[b][ ][Set ID][ ][OK][Data][x]
Data 0 : TV
2 : AV
3 : S-Video
4 : Component 1
5 : Component 2
6 : RGB PC
8 : DVI PC
Data 0 : TV
2 : AV
3 : S-Video
4 : Component 1
5 : Component 2
6 : RGB PC
8 : DVI PC
[k][e][ ][Set ID][ ][Data][Cr]
[e][ ][Set ID][ ][OK][Data][x]
[k][f][ ][Set ID][ ][Data][Cr]
[f][ ][Set ID][ ][OK][Data][x]
[k][g][ ][Set ID][ ][Data][Cr]
[g][ ][Set ID][ ][OK][Data][x]
[k][h][ ][Set ID][ ][Data][Cr]
[h][ ][Set ID][ ][OK][Data][x]