LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS 26LC4R* 26LC7R* 32LC4R* 32LC7R* 37LC4R* 37LC7R* 42LC4R* 42LC7R* 32LB9R* 42LB9R* PLASMA TV MODELS 42PC5R* 42PC5RV* 42PC7R* 50PC5R* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ACCESSORIES IN PU TV T INPU T RA TIO SIM PIP PLINK PR P PIP IP PR + I/I I INPU IN PU TV T INPU T T LI ST IT M EN U Owner's Manual M O TV DE DV D VC R PIP EX PO W ER SL EE P RA TIO SIM PIP PLINK PR P PIP IP PR + Q. VIEW OK VO L EX IT PR MU TE 3 I/I INPU I T LI ST M EN U 2 5 8 M TV DV D VC R SL EE P PIP FAV 1 4 7 SIZE PO W ER ACCESSORIES Ensure that the following accessories are included with your TV.
CONTENTS A C C E S S O R I E S .....................................................1 CONTENTS PREPARATION PICTURE CONTROL PICTURE CONTROL Front Panel Controls..................................................... 4 Back Panel Information ................................................ 6 Stand Installation........................................................... 8 ATTACHING THE TV TO A DESK (Only 32LB9R* model) ........ 8 Attaching the TV to a Wall ...........................................
TIME SETTING CONTENTS Clock Setup....................................................................69 Auto On/Off Timer Setting .......................................70 Sleep Timer Setting......................................................71 Auto Shut-off Setting...................................................72 APPENDIX Troubleshooting........................................................73 Maintenance .............................................................75 Product Specifications .....
PREPARATION FRONT PANEL CONTROLS ■ ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. Plasma TV Models 42/50PC5R* PREPARATION Remote Control Sensor INPUT MENU MENU PR PR VOL OK VOL OK MENU INPUT INPUT PR VOL OK Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
LCD TV Models PR PROGRAMME Buttons VOL VOLUME Buttons OK Button OK MENU MENU Button INPUT INPUT Button POWER Button /I Remote Control Sensor PREPARATION 26/32/37/42LC4R* 26/32/37/42LC7R* Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on. 32/42LB9R* VOL VOLUME Buttons OK OK Button MENU MENU Button INPUT INPUT Button /I Remote Control Sensor PR Intelligent Eye Adjusts picture according to the surrounding conditions.
PREPARATION BACK PANEL INFORMATION ■ This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. Plasma TV Models 42/50PC5R* S-VIDEO PREPARATION S-Video Input Connect S-Video out from an S-VIDEO device.
LCD TV Models S-VIDEO VIDEO L/MONO AUDIO R VIDEO L/MONO AUDIO R L/MONO MONO AUDIO R VIDEO L/ Audio/Video Input Connect audio/video output from an external device to these jacks. S-VIDEO S-VIDEO AV V IN 2 PREPARATION S-Video Input Connect S-Video out from an S-VIDEO device.
PREPARATION STAND INSTALLATION (Only 26, 32,37 inch LCD TV models) PREPARATION 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Install the 4 bolts securely, in the back of the product in the holes provided. ATTACHING THE TV TO A DESK (Only 32LB9R* model) If you wish to attach the TV to a desk, it must be securely fastened to the desk using a metal screw (as shown below).
ATTACHING THE TV TO A WALL (This feature is not available for all models.) ■ ■ Plasma TV models LCD TV models PREPARATION Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT Plasma TV models ■ These models have two cable arrangement methods according to the stand type. PREPARATION Stand type 1 Arrange the cables as shown picture. Stand type 2 1 Hold the C A B L E M A N A G E M E N T with hands and push it as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section.
LCD TV models 1 Connect the cables as necessary. 2 or PREPARATION To connect an additional equipment, see the E x t e r n a l equipment Connections section. Install the C A B L E M A NA G E M E N T as shown. or CABLE MANAGEMENT (Insert it as pushing the loops on the both sides of the cable management.) 3 Bundle the cables using the supplied twister holder. (This feature is not available for all models.
PREPARATION ■ ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. Power Supply PREPARATION Short-circuit Breaker GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
WALL MOUNT: HORIZONTAL INSTALLATION PREPARATION For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 4 inches 4 inches 4 inches 4 inches 4 inches < O n l y 4 2 P C 7 R* > Remove two screws of the backside of the set before installing the wall mounting bracket.
PREPARATION ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION S-VIDEO For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the set.
1 EXTERNAL EQUIPMENT SETUP 2 COMPONENT IN When connecting with a HDMI cable HDMI/DVI HDMI DVI ININ 1 EXTERNAL EQUIPMENT SETUP 1 Connect the HDMI output of the digital set-top box to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set. 2 Select HDMI1 or HDMI2 input source with using the I N P U T button on the remote control. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
When connecting with a HDMI to DVI cable HDMI IN 1 AV IN 1 AV OUT AUDIO (RGB/DVI) RGB(PC) AUDIO (RGB/DVI) 2 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the set. 2 Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the set. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 4 Select HDMI1 input source with using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable EXTERNAL EQUIPMENT SETUP 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. 2 Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select Component input source with using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2, select Component2 input source.
VIDEO L/MONO AUDIO R AV IN 2 When connecting with a RCA cable 1 V I D E O jacks between TV and DVD Connect the A U D I O/V player. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) S-VIDEO ANT IN R ANT OUT OUTPUT SWITCH Insert a DVD into the DVD player and press PLAY on the DVD player. (Refer to the DVD player owner’s manual.) EXTERNAL EQUIPMENT SETUP 2 L VIDEO 1 Select AV1 input source using the I N P U T button on the remote control. HDMI IN input source.
1 2 EXTERNAL EQUIPMENT SETUP COMPONENT IN When connecting HDMI cable 1 Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set. EXTERNAL EQUIPMENT SETUP 2 Select HDMI1 or HDMI2 input source with using the I N P U T button on the remote control. 3 Refer to the DVD player's manual for operating instructions. HDMI/DVI HDMI DVI ININ HDMI IN IN HDMI 1 2 1 ! NOTE TV can receive the video and audio signal simultaneously with using a HDMI cable.
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. ■ When connecting with an antenna ANT IN OUTPUT SWITCH VIDEO L R 1 AV IN 1 AV OUT AUDIO (RGB/DVI) L/MONO ANTENNA IN 2 Wall Jack Antenna 1 Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the set.
VIDEO L/MONO A EXTERNAL EQUIPMENT SETUP AV IN 2 When connecting with a RCA cable S-VIDEO L VIDEO R OUTPUT SWITCH ANT IN ANT OUT AV IN IN 11 AV OUT AV HDMI IN RGB(PC) AUDIO (RGB/DVI) VIDEO HDMI DVI IN R AUDIO L/MONO L/ MONO L/MONO EXTERNAL EQUIPMENT SETUP 1 1 V I D E O jacks between TV and VCR. Match the jack colors (Video = yellow, Connect the A U D I O/V Audio Left = white, and Audio Right = red) 2 Insert a video tape into the VCR and press PLAY on the VCR.
When connecting with an S-Video cable VIDEO Connect the S-VIDEO output of the VCR to the S V I D E O input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the A U D I O input jacks on the set. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 4 Select AV2 input source with using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set VIDEO EXTERNAL EQUIPMENT SETUP 24 L R L/MONO MONO AUDIO R VIDEO L/ S-VIDEO 1 AV V IN 2 1 V I D E O jacks between TV and external equipment. Match the jack colors. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select AV2 input source with using the I N P U T button on the remote control. If connected to A V I N 1, select AV1 input source.
HDMI DVI IN HDMI IN EXTERNAL STEREO Use to connected either an external amplifier, or add a subwoofer to your surround sound system. 2 Set up your speakers through your analog stereo amplifier, according to the instructions provided with the amplifier. ! NOTE G When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p .
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable HDMI IN AUDIO (RGB/DVI) RGB(PC) AUDIO (RGB/DVI) EXTERNAL EQUIPMENT SETUP 1 RGB OUTPUT 26 AV IN 1 AV OUT RGB IN RGB(PC) L/MONO HDMI DVI IN 2 AUDIO 1 Connect the RGB output of the PC to the R G B ( P C) jack on the set. 2 Connect the PC audio output to the A U D I O jack on the set.
! NOTE The synchronization input waveform for Horizontal and Vertical frequencies are separate. G We recommend using 1366x768, 60Hz (LCD TV models) / 852x480, 60Hz (42 inch WVGA PLASMA TV models) / 1024x768, 60Hz (42 inch XGA PLASMA TV models) / 1360x768, 60Hz (50 inch PLASMA TV models) for the PC mode, they provide the best picture quality. G If the resolution of PC is over SXGA, there will be no picture on the set. G Connect the audio cable from the PC to the Audio input on the set.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image shaking.After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. LIST MENU Q.VIEW EXIT OK Auto configure EXTERNAL EQUIPMENT SETUP This function is for the automatic adjustment of the screen position, clock, and phase.
Adjustment for screen Phase, Clock, Position If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. LIST MENU Q.VIEW EXIT To correct the screen size, adjust C l o c k. OK FAV VOL It’s not available to use Phase, Clock function in COMPONENT (480i/480p/576i/576p/720p/1080i), HDMI (480p/576p/720p/1080i/1080p(except VGA Models)).
EXTERNAL EQUIPMENT SETUP Selecting Wide VGA/XGA mode To see a normal picture, match the resolution of RGB mode and selection of VGA/XGA mode. LIST MENU Q.VIEW EXIT OK This function works in the following mode: RGB[PC] mode. FAV VOL PR EXTERNAL EQUIPMENT SETUP MUTE Picture 1 Press the M E N U button and then use D / select the Picture menu. 2 Press the G button and then use D / Screen.
Initializing (Reset to original factory settings) LIST MENU Q.VIEW EXIT This function operates in current mode. To initialize the adjusted value OK FAV PR EXTERNAL EQUIPMENT SETUP VOL MUTE 1 2 3 4 5 6 7 8 9 Picture 1 2 Press the MENU button and then use D / select the Picture menu. Press the G button and then use D / E E Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen XD Demo button to button to select Screen.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT TV INPUT POWER Switches the set on from standby or off to standby. MODE TV POWER TV INPUT Returns to the TV viewing from any mode. Switches the set on from standby. DVD RATIO SIMPLINK VCR SLEEP PIP PIP PR- PIP PR+ INPUT If you press the button once, the input source OSD will appear on screen as shown.
INPUT TV INPUT MODE TV POWER DVD RATIO SIMPLINK VCR SLEEP PIP PIP PR- PIP PR+ I/II PIP INPUT MODE Selects the remote operating modes. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(G p . 4 4) SLEEP Sets the sleep timer. I/II Selects the sound output. LIST MENU Q.VIEW THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left the system settings to your preference.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV If your TV will be turned on, you will be able to use its features. 1 WATCHING TV / PROGRAMME CONTROL 34 First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , I N P U T, P R D / E button on the TV or press the P O W E R, T V, I N P U T, P R + / -, N u m b e r ( 0~9 9 ) button on the remote control and then the TV will switch on.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. The OSD mainly use pictures for the Plasma TV models. 1 Press the M E N U button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the O K or M E N U button.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Up to 200 TV stations can be stored by programme numbers (0 to 199). Once you have preset the stations, you will be able to use the PR +/- or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. LIST MENU OK All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
MANUAL PROGRAMME TUNING Manual programme lets you manually tune and arrange the stations in whatever order you desire. LIST MENU Q.VIEW EXIT OK 1 2 Press the M E N U button and then D / Setup menu. Press the G button and then D / Tuning. E E button to select the 4 Press the F / G button or NUMBER buttons to select the desired programme number (0 to 199). If you use NUMBER buttons, any number under 10 is entered with a numeric ‘0’ in 0 5’ for 5. front of it, i.e.
WATCHING TV / PROGRAMME CONTROL FINE TUNING Normally fine tuning is only necessary if reception is poor. LIST MENU Q.VIEW EXIT OK 1 Press the M E N U button and then D / the Setup menu. E button to select FAV VOL PR MUTE 2 WATCHING TV / PROGRAMME CONTROL Press the G button and then D / Manual Tuning. E button to select 1 2 3 4 5 6 7 8 9 Setup 3 Press the G button and then D / E button to select Fine. 4 Press the G button and then F / the best picture and sound.
ASSIGNING A STATION NAME You can assign a station name with five characters to each programme number. LIST MENU Q.VIEW EXIT OK 1 Press the M E N U button and then D / the Setup menu. E button to select FAV VOL PR MUTE 2 E button to select 2 3 4 5 6 7 8 9 Setup 3 Press the G button and then D / Name. 4 Press the G button and then D / E button. You can use a blank, + , - , the number 0 to 9 and the alphabet A to Z.
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. LIST MENU Q.VIEW EXIT OK 1 Press the M E N U button and then D / the Setup menu. E button to select FAV VOL 2 WATCHING TV / PROGRAMME CONTROL 3 Press the G button and then D / Programme Edit.
FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. Repeatedly press the FAV button to select stored favourite programmes. LIST MENU Q.VIEW EXIT 1 Press the M E N U button and then D / Setup menu. E OK button to select the FAV VOL PR MUTE 2 Press the G button and then D / Favourite Programme. E button to select 2 3 4 5 6 7 8 9 Setup 3 Press the G button. 4 Press the D / 5 Select a desired programme with the F / G button or NUMBER buttons.
WATCHING TV / PROGRAMME CONTROL CALLING THE PROGRAMME TABLE You can check the programmes stored in the memory by displaying the programme table. LIST MENU Q.VIEW EXIT OK A Displaying programme table Press the L I S T button to display the Programme table menu. FAV VOL PR The programme table appears on the screen. MUTE One programme table contains ten programmes as shown. WATCHING TV / PROGRAMME CONTROL ! NOTE a. You may find some blue programmes.
KEY LOCK The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. LIST MENU Q.VIEW EXIT This set is programmed to remember which option it was last set to even if you turn the set off. OK FAV VOL PR MUTE 1 Press the M E N U button and then D / the Option menu. E button to select 1 2 3 4 5 6 7 8 9 2 Press the G button and then D / Lock. E button to select Key 3 Press the G button and then D / Off.
WATCHING TV / PROGRAMME CONTROL This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. VCR RATIO SIMPLINK This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. SLEEP LIST TEXT MENU I/II Q.VIEW * EXIT OK If you do not want SIMPLINK menu, select “OFF”. FAV VOL PR MUTE WATCHING TV / PROGRAMME CONTROL 44 Option 1 Press the M E N U button and then D / Option menu.
SIMPLINK Functions Disc playback Control connected AV devices by pressing the D / E / F / G, O K buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.(The button does not provide such functions) Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it.
PICTURE CONTROL WATCHING PIP(PICTURE-IN-PICTURE) PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. INPUT TV INPUT MODE TV POWER DVD PIP function is available in the Component, RGB, HDMI mode. (But, it can’t adjust 480i/576i resolution of Component mode.) RATIO SIMPLINK VCR SLEEP PIP PIP PR- PIP PR+ LIST I/II PIP INPUT MENU Q.
Input Source Selection for Sub Picture Press the P I P I N P U T button to select the input source for the sub picture. Each press of P I P I N P U T button is pressed, each input source for the sub picture is displayed. (Sub picture can be selected only TV, AV1, AV2) Sub Picture Size Adjustment (PIP mode only) PICTURE CONTROL Press the S I Z E button to adjust the sub picture size. With S I Z E button in PIP mode, sub picture is adjusted.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO)CONTROL You can watch the screen in various picture formats; S p e c t a c l e, O r i g i n a l, 4 : 3, 1 6 : 9, 1 4 : 9 and Z o o m 1 / 2. INPUT TV INPUT MODE TV POWER DVD VCR RATIO If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using D / E SIMPLINK SLEEP PIP PIP PR- PIP PR+ I/II PIP INPUT button. LIST MENU Q.
• 14:9 You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The screen 14:9 is viewed just like that the screen 4:3 is magnified to the left / right. 14:9 • Zoom2 Choose Zoom2 when you want the picture to be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset I n t e l l i g e n t E y e Adjusts picture according to the surrounding conditions.(32/42LB9R* only) Dynamic Select this option to display with a sharp image. Standard The most general and natural screen display status. Mild Select this option to display with a mild image. User1/2 Select this option to use the user-defined setting. LIST MENU Q.
Auto Colour Tone Control(Warm/Medium/Cool) To initialize values (reset to default settings), select the Cool option. LIST Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. MENU Q.VIEW EXIT OK It’s available to use this function in “User1/2” of Picture mode only. FAV VOL PR MUTE Press the M E N U button and then D / the Picture menu.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option Contrast Brightness Colour Sharpness Tint Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels. LIST MENU Q.
Colour Tone - User option To adjust red, green, blue to any colour temperature you prefer. LIST It’s available to use this function in “User1/2” of Picture mode only. MENU Q.VIEW EXIT OK FAV VOL PR MUTE 1 1 Press the G button and then D / E E button to select Picture Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen XD Demo button to select Colour Temperature.
PICTURE CONTROL - PICTURE IMPROVEMENT TECHNOLOGY XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. It’s not available to use this function in RGB-PC mode. LIST MENU Q.VIEW EXIT OK 1 Press the MENU button and then D / the Picture menu. E button to select FAV VOL PR 2 MUTE Press the G button and then D / 3 PICTURE CONTROL 4 Press the G button and then D / Auto or Manual. E E button to select XD.
DEMO Use it to see the difference between XD Demo on and XD Demo off. LIST It’s not available to use this function in RGB[PC] mode. MENU Q.VIEW EXIT OK FAV VOL PR MUTE 1 2 3 Picture Press the MENU button and then D / the Picture menu. 2 Press the G button and then D / E button to select E button to select XD Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen XD Demo Demo. DE F G 3 OK MENU 1 Press the G button to begin XD Demo.
PICTURE CONTROL ADVANCED - CINEMA Set up the TV for the best picture appearance for viewing movies. LIST MENU Q.VIEW EXIT This feature operates only in Analog TV, AV, S-video and Component 480i/576i mode. OK FAV VOL PR MUTE 1 2 3 4 5 6 Picture 1 Press the M E N U button and then D / E button to select Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen XD Demo the Picture menu. PICTURE CONTROL 2 Press the G button and then D / E button to select Advanced.
ADVANCED - BLACK(DARKNESS) LEVEL When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. LIST MENU Q.VIEW EXIT This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI. OK FAV VOL 1 Press the M E N U button and then D / the Picture menu.
PICTURE CONTROL PICTURE RESET Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced, Aspect Ratio at the factory. LIST MENU Q.VIEW EXIT OK FAV VOL PR MUTE 1 2 3 4 5 6 7 8 9 Picture PICTURE CONTROL 1 Press the M E N U button and then D / the Picture menu. 2 Press the G button and then D / Picture Reset.
IMAGE STICKING MINIMIZATION(ISM)METHOD A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. LIST MENU Q.VIEW EXIT It’s not available to use this function in LCD models. OK White wash White wash removes permanent images from the screen.
PICTURE CONTROL LOW-POWER PICTURE MODE This is the function to reduce the power consumption of the set. Option Language SIMPLINK Key Lock ISM Method Low Power It’s not available to use this function in LCD models. 1 Press the M E N U button and then D / select the Option menu. E button to DE F G 2 3 4 Press the G button and then D / Low Power. E Press the G button and then D / On or Off.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically keeps on an equal volume level even if you change programmes. LIST MENU Q.VIEW EXIT OK FAV VOL PR MUTE 1 Press the M E N U button and then D / the Audio menu. E button to select 1 2 3 4 5 6 7 8 9 Audio 2 Press the G button and then D / Volume. E 3 Press the G button and then D / Off.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. LIST MENU Q.VIEW EXIT Sound Mode lets you enjoy the best sound without any Special adjustment because the TV sets the appropriate sound options based on the programme content.
SOUND SETTING ADJUSTMENT -USER MODE Adjust the sound equalizer. LIST MENU Q.VIEW EXIT OK FAV VOL 1 2 Press the M E N U button and then D / the Audio menu. Press the G button and then D / Sound Mode. Press the G button and then D / 4 Press the G button. button to select PR MUTE button to select 1 2 3 4 5 6 7 8 9 Audio Sound Mode Auto Volume Balance TV Speaker E 0 button to select User. DE F G OK MENU 1 Audio 5 6 Select a sound band by pressing the F / G button.
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of speaker to the levels you prefer. LIST MENU Q.VIEW EXIT OK FAV VOL PR MUTE 1 2 3 4 5 6 7 8 9 Audio 1 Press the M E N U button and then D / the Audio menu. 2 Press the G button and then D / Balance. E E Sound Mode Auto Volume Balance TV Speaker button to select- button to select DE F G SOUND & LANGUAGE CONTROL 64 0 OK MENU 1 3 Press the G button and then F / desired adjustment.
TV SPEAKERS ON/OFF SETUP You can adjust the internal speaker status. In AV, COMPONENT, RGB[PC] and HDMI mode, internal speaker audio can be outputted even though there is no video signal. LIST MENU Q.VIEW EXIT OK If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. FAV VOL PR MUTE 1 2 3 4 5 6 7 8 9 Audio 1 2 Press the M E N U button and then D / the Audio menu.
SOUND & LANGUAGE CONTROL I/II Stereo/Dual Reception INPUT TV INPUT MODE TV POWER DVD VCR RATIO When a programme is selected, the sound information for the station appears after the programme number and station name disappear. A A SOUND & LANGUAGE CONTROL 66 Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice.
NICAM Reception If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O. 2 When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. Press the M E N U button and then use D / Option menu. 1 E button to select the INPUT TV INPUT MODE TV POWER DVD 2 Press the G button and then use D / E button to select Language. RATIO SIMPLINK VCR SLEEP PIP PIP PR- PIP PR+ 3 Press the G button and then use D / language. E I/II PIP INPUT button to select your desired LIST MENU Q.
TIME SETTING CLOCK SETUP You must set the time correctly before using on/off time function. LIST MENU Q.VIEW EXIT If current time setting is erased by a power failure or the set is unplugged, reset the clock. OK FAV VOL PR MUTE 1 Press the M E N U button and then D / the Time menu. E button to select 1 2 3 4 5 6 7 8 9 Time 2 Press the G button and then D / Clock. 3 Press the G button and then hour.
TIME SETTING AUTO ON/OFF TIMER SETTING The Off time automatically switches the set to standby at the preset time. LIST MENU Q.VIEW EXIT Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. OK Once the on time/off time is set, these functions operate daily at the preset time. FAV VOL PR MUTE Off time function overrides On timer function if they are set both to the same time.
SLEEP TIMER SETTING You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. RATIO SIMPLINK VCR SLEEP PIP PIP PR- PIP PR+ LIST I/II PIP INPUT MENU Q.VIEW EXIT OK 1 Press the S L E E P button repeatedly to select the number of minutes. The display ‘ - - - ’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
TIME SETTING AUTO SHUT-OFF SETTING If set to on and there is no input signal, the TV turns off automatically after 10 minutes. LIST MENU Q.VIEW EXIT OK FAV VOL PR MUTE 1 2 3 4 5 6 7 8 9 Time 1 Press the M E N U button and then D / the Time menu. 2 Press the G button and then D / Sleep. E E Clock Off Time On Time Sleep Time Auto Sleep button to select button to select Auto DE F G OK MENU 11 Time 3 TIME SETTING 4 Press the G button and then D / Off.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Correct remote operating mode set: TV, VCR etc.? ■ Install new batteries. ■ The remote control doesn’t work Is the sleep timer set? Check the power control settings. Power interrupted ■ No broadcast on station tuned with Auto off activated.
APPENDIX The audio function does not work. Press the V O L + / - ( o r V o l u m e ) button. ■ Sound muted? Press M U T E button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) with stand without stand with stand Weight without stand Power requirement 26LC4R* 32LC4R* 37LC4R* 42LC4R* 26LC4R-TA 32LC4R-TA 37LC4R-TA 42LC4R-TA 676.4 x 529.2x 221.0 mm 26.6 x 20.8 x 8.7 inches 806.4 x 606.1x 249.0 mm 31.8 x 23.9 x 9.8 inches 926.6 x 697.6x 280.4mm 36.5x 27.5 x 11.0 inches 1032.7 x 750.0 x 287.6 mm 40.7x 29.5 x 11.3 inches 676.4 x 474.3 x 85.0 mm 26.6 x 18.7 x 3.3 inches 806.4 x 548.4 x 80.
PRODUCT SPECIFICATIONS 42PC5RV* 42PC5R* MODELS Dimensions (Width x Height x Depth) with stand without stand with stand Weight without stand Power requirement 42PC5R-TB/42PC5R-TD 42PC5RV-TB/42PC5RV-TD 42PC5R1-TB/42PC5R1-TD 42PC5RVH-TB/42PC5RVH-TD 42PC5RH-TB/42PC5RH-TD 42PC7R* 50PC5R* 42PC7RV-TA 42PC7RVH-TA 50PC5R-TB/50PC5R-TD 50PC5R1-TB/50PC5R1-TD 50PC5RH-TB/50PC5RH-TD 1048.0 x 766.0 x 310.0 mm 1048.0 x 766.0 x 310.0 mm 41.3 x 30.2 x 12.2 inches 41.3 x 30.2 x 12.2 inches 1216.0 x 701.0 x 286.
APPENDIX PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode APPENDIX 78 1 Test your remote control.
Programming code VCR Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027 035 101 153 010 045 026
DVD Brand Codes APEX DIGITAL 022 DENON 020 GE 005 HARMAN KARDON JVC 012 LG 001 MAGNAVOX 013 MARANTZ 024 APPENDIX 80 014 006 027 010 016 025 Brand Codes Brand Codes MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN 002 023 008 003 013 004 021 005 RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 011 007 005 019 009 010 017 009 026 006 006 015 006 008 018 016 025
