ENGLISH OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. www.lge.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
CONTENTS PREPARATION 42/50PJ2**, 42/50PJ3**, 42/50PJ5**, 42/50PJ6**, 50/60PK2**,50PK3**, 50/60PK5**, 50PK7**.................................................................. A-1 Antenna Connection ..................................................1 Connecting with a Component cable................... 2 Connecting with an HDMI cable ........................... 3 Connecting with an HDMI to DVI cable .............. 3 Connecting with a Euro Scart cable.......................4 Usb setup .......................
CONTENTS EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) CONTENTS Switch on/off EPG .................................................. 68 Select a Programme................................................ 68 Button Function in NOW/NEXT Guide Mode . 68 Button Function in 8 Day Guide Mode...............69 Button Function in Date Change Mode............. 69 Button Function in Extended Description Box .. 70 Button Function in Record/Remind Setting Mode....... 70 Button Function in Schedule List Mode........
PREPARATION P L A S M A T V M o d e l s : 4 2 / 5 0 P J 2* * , 4 2 / 5 0 P J 3* * , 4 2 / 5 0 P J 5* * , 4 2 / 5 0 P J 6* * , 5 0 / 6 0 P K 2* * ,5 0 P K 3* * , 5 0 / 6 0 P K 5* * , 5 0 P K 7* * ACCESSORIES ■ Image shown may differ from your TV. EN ER GY AV SAVI NG MO DE INPU T 1 2 4 7 LIS 0 This item is not included for all models. 6 8 T TV RA / D 3 5 9 MA FA RK V Q.V IEW * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
PREPARATION FRONT PANEL CONTROLS ! NOTE G The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. PREPARATION CAUTION G G ■ Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall. Do not drag the TV. The floor or the product may be damaged. Image shown may differ from your TV.
42/50PJ5**, 50/60PK5** Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions PREPARATION Power/Standby Indicator • Illuminates red in standby mode. • Turn off red smoothly when the TV is switched on. Touch Sensor You can use the desired button function by touching.
COMPONENT IN IN 2 BACK PANEL INFORMATION Image shown may differ from your TV. IN 2 PREPARATION COMPONENT IN (Only 50/60PK2**) 3 2 VIDEO L/MONO AUDIO R 1 4 S-VIDEO (Only 42/50PJ2**) (Only 50/60PK2**) 9 SERVICE VICE SERVICE ONLY ONLY USB IN SERVICE ONLY 42/50PJ2**, 50/60PK2** SERVICE SER SERVICE VICE ONLY ONLY ■ 10 9 10 AV IN 3 5 ININ2 2 3 COMPONENT IN COMPONENT IN COMPONENT IN /DVI IN1 or A-4 Power Cord Socket This TV operates on an AC power.
3 VIDEO L/MONO AUDIO R 4 5 AV IN 3 3 VIDEO L/MONO AUDIO R COMPONENT IN COMPONENT IN COMPONENT IN IN 2 2 11 or /DVI IN 1 S-VIDEO S-VIDEO AV IN 3 1 USB IN SERVICE ONLY USB IN SERVICE ONLY IN 2 VIDEO L/MONO AUDIO R 10 PREPARATION IN 2 42/50PJ3**, 42/50PJ5**, 42/50PJ6**, 50PK3** 12 AV IN 3 6 2 3 9 8 9 RGB IN Input Connect the output from a PC. Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (G p.
3 4 5 VIDEO L/MONO AUDIO R IN 3 COMPONENT IN 2 COMPONENT IN COMPONENT IN IN 3 2 11 AV IN 3 or 1 /DVI IN 12 AV IN 3 1 2 3 8 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (G p.113 to 114) Never attempt to operate the TV on DC power. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN.
STAND INSTALLATION (Except for 60PK5**, 60PK2** ) BACK COVER FOR WIRE ARRANGEMENT 1 PREPARATION ■ Image shown may differ from your TV ■ Image shown may differ from your TV. When assembling the desk type stand, check whether After Connecting the cables as necessary, install the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) Cable Holder as shown and bundle the cables.
PREPARATION CAREFUL INSTALLATION ADVICE You should purchase necessary components to fix the TV safety and secure to the wall on the market. A Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage.
A A The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. EARTHING 10 cm 10 cm 10 cm 10 cm Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
PREPARATION REMOTE CONTROL KEY FUNCTIONS (Except for 42/50PJ2**, 50/60PK2**) When using the remote control, aim it at the remote control sensor on the TV. r(POWER) Switches the TV on from standby or off to standby. PREPARATION ENERGY SAVING Adjust the Energy Saving mode of the TV.(G p . 7 4) ENERGY AV MODE INPUT AV MODE It helps you select and set images and sounds when connecting AV devices.(G p . 3 8) TV/ RAD SAVING INPUT External input mode rotate in regular sequence.(G p .
VOLUME UP Adjusts the volume. /DOWN AV MODE FAV Displays the selected favourite programme. INPUT TV/ RAD MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. SAVING 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW RATIO Selects your desired Aspect Ratio of picture.(G p . 7 1) MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one.
PREPARATION REMOTE CONTROL KEY FUNCTIONS (Only 42/50PJ2**, 50/60PK2**) When using the remote control, aim it at the remote control sensor on the TV. r(POWER) Switches the TV on from standby or off to standby. ENERGY SAVING Adjust the Energy Saving mode of the TV.(G p . 7 4) PREPARATION ENERGY AV MODE INPUT AV MODE It helps you select and set images and sounds when connecting AV devices.(G p . 3 8) TV/ RAD SAVING INPUT External input mode rotate in regular sequence.(G p .
ENERGY AV MODE FAV Displays the selected favourite programme. INPUT TV/ RAD MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. SAVING 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW RATIO Selects your desired Aspect Ratio of picture.(G p . 7 1) MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one. SIMPLINK con- Controls SIMPLINK.
EXTERNAL EQUIPMENT SETUP ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION Wall Antenna Socket VIDEO L/MONO AUDIO R Multi-family Dwellings/Apartments (Connect to wall antenna socket) AV IN 3 RF Coaxial Wire (75 Ω) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) COMPONENT IN Outdoor Antenna (VHF, UHF) EXTERNAL EQUIPMENT SETUP IN 2 For optimum picture quality, adjust antenna direction.
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 50/60PK5** models. ■ Image shown may differ from your TV. ■ CONNECTING WITH A COMPONENT CABLE This TV can receive Digital RF/Cable signals without an external digital set-top box.
COMPONENT IN CONNECTING WITH AN HDMI CABLE Connect the HDMI output of the external equipment (digital set-top box, DVD, etc.) to H D M I / D V I I N 1 (or H D M I / D V I I N) , H D M I I N 2(Except for 42/50PJ2**) or H D M I I N 3(Only 50/60PK5**, 50PK7**) jack on the TV. 1 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH A EURO SCART CABLE 1 Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the A V 1 Euro scart socket on the TV. 2 HDMI IN 1 EXTERNAL EQUIPMENT SETUP 2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) 3 Select A V 1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select A V 2 input source.
1 2 VIDEO L/MONO AUDIO R HDMI IN 3 CONNECTING WITH A RCA CABLE(Except for 42/50PJ2**, 50/60PK2**) V I D E O jacks between TV and Connect the A U D I O/V VCR or external equipment. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) AV IN 3 S-VIDEO 3 Select A V 3 input source using the I N P U T button on the remote control. L VIDEO ANT IN R OUTPUT SWITCH EXTERNAL EQUIPMENT SETUP Insert a video tape into the VCR and press PLAY on the VCR.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE(Except for 42/50PJ2**, 50/60PK2**) Connect the RGB output of the PC to the R G B I N ( P C ) jack on the TV. 1 COMPONENT IN This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. 2 HDMI IN 1 HDMI/DVI IN EXTERNAL EQUIPMENT SETUP Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV.
DIGITAL AUDIO OUT SETUP Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2 Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment. 2 HDMI IN 1 DMI/DVI IN 3 Set the “TV Speaker option - Off ” in the AUDIO menu.(Gp .90). Refer to the external audio equipment instruction manual for operation. 1 2 CAUTION G Do not look into the optical output port. Looking at the laser beam may damage your vision.
EXTERNAL EQUIPMENT SETUP Supported Display Resolution RGB-PC, HDMI/DVI-PC mode (Except for 42/50PJ2**, 50/60PK2**) EXTERNAL EQUIPMENT SETUP 8 Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.78 59.87 1360x768 47.72 59.8 1280x1024 63.98 60.02 1400x1050 65.317 59.979 1920x1080 66.587 59.
! NOTE G G G G We recommend using 1024 x 768, 60 Hz(Only 42PJ3**, 42PJ5**, 42PJ6**), 1360 x 768, 60 Hz(Only 50PJ3**, 50PJ5**, 50PJ6**), 1920 x 1080, 60 Hz(Only 50PK3**, 50/60PK5**, 50PK7**) for the PC mode, they provide the best picture quality. G G G G G G Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). If using a sound card, adjust PC sound as required.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode(Except for 42/50PJ2**, 50/60PK2**) Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. EXTERNAL EQUIPMENT SETUP PICTURE Move SCREEN OK E • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 • Colour Temperature 0 Prev. Resolution Auto Config.
Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. PICTURE Move SCREEN OK E • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 • Colour Temperature 0 Move Prev. Resolution Auto Config.
EXTERNAL EQUIPMENT SETUP Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] EXTERNAL EQUIPMENT SETUP SCREEN PICTURE Move Resolution E • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 • Colour Temperature 0 Move Prev. OK Auto Config.
Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC]. Move SCREEN OK Move Prev. E • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 • Colour Temperature 0 Resolution Auto Config.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV - When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the r / I, INPUT or P button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. F Aspect Ratio G 16:9 (Except for 42/50PJ2**, 50/60PK2**) 1 Q.MENU 2 A u d i o : Selects the sound output. S l e e p T i m e r : Sets the sleep timer. F a v o u r i t e : Selects the favourite programme. U S B D e v i c e : Selects “Eject” in order to eject USB device.
WATCHING TV / PROGRAMME CONTROL ON-SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
AUTO PROGRAMME TUNING (For countries other than Finland and Sweden) Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 1000. But the number may differ slightly depending on broadcasting signals.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING (Only for Finland and Sweden) DVB-C Auto Tuning is a menu for users in countries that support DVB cable. Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted.
If you want to select the C a b l e, SETUP Move OK SETUP Move OK Please select your TV Connection. Auto Tuning Auto Tuning Manual Tuning Manual Tuning Programme Edit Programme Edit Software Update : On Diagnostics CI Information CI Information : On Modulation Cable MENU 5 Select S E T U P. OK G 362000 6875 640AM Network ID Antenna 0 OK Close Close 1 Default Symbol rate(kS/s) Software Update Diagnostics F Frequency(kHz) Select S t a r t. 6 2 Select A u t o T u n i n g.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. (For countries other than Finland and Sweden & When selecting Antenna if Finland, Sweden or “--” country is chosen) SETUP Move SETUP OK Move F WATCHING TV / PROGRAMME CONTROL Auto Tuning Auto Tuning Manual Tuning Tuning Manual Manual Tuning Programme Edit Software Update : On OK Programme Edit UHF CH.
(When selecting Cable (DVB cable mode) if Finland, Sweden or “--” country is chosen) SETUP Move SETUP OK Move F OK DTV Auto Tuning Frequency(kHz) Manual Tuning Tuning Manual Manual Tuning Symbol rate(kS/s) Programme Edit Programme Edit Software Update : On Software Update Diagnostics Diagnostics CI Information CI Information Modulation : On Bad G 362000 6875 640AM Normal Good Add Close 1 MENU Select S E T U P. • Use NUMBER buttons to input a 4-digit pass- O n’.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP Move OK SETUP Auto Tuning Auto Tuning Manual Tuning Manual Tuning Programme Edit Programme Edit Software Update : On Diagnostics CI Information Software Update Move OK F TV G Storage : On System BG Band V/UHF Diagnostics CI Information 3 Channel 0 Search F G Name C 02 A Assigning a station name You can assign a station name with five characters to each programme number. 1 Select S E T U P. MENU 2 5 OK Select M a n u a l T u n i n g.
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P viewing. button during TV If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked when you start Auto Tuning.
IN DTV/RADIO MODE A Skipping a programme number 1 • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. Select a programme number to be skipped. 2 BLUE Turn the programme number to blue. 3 • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG. BLUE Release.
WATCHING TV / PROGRAMME CONTROL SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP OK WATCHING TV / PROGRAMME CONTROL Auto Tuning Manual Tuning Manual Tuning Software Update On ::On Software Update Diagnostics Diagnostics CI Information CI Information 1 Select S E T U P. MENU 2 Select S o f t w a r e U p d a t e. OK 3 Select O n or O f f.
* When setting “Software Update” Software update is available. Would you like to download now? (approximately 30 Min ~ 2 hours) Your TV software is updated when you turn off the TV using the remote control or local key. Do not unplug! Yes No A new software update is available at 00/00/0 00:00. Do you want to update the software when available? Yes After the Software Update is complete, the System restarts. Software downloading progress. Ver. 03.02.00 Ver. 03.01.
WATCHING TV / PROGRAMME CONTROL DIAGNOSTICS This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.)) Engineering Diagnostics SETUP Move Manufacturer : LG Electronics Inc.
CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output.
WATCHING TV / PROGRAMME CONTROL SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Mini Glossary PROGRAMME LIST Displayed when the Locked Programme. 1 BBC 2 BBC 3 BBC WATCHING TV / PROGRAMME CONTROL Exit Displaying programme LIST A 1 Display the Programme List. LIST A 2 Select a programme. TV/ RAD The mode will be switched between TV, DTV, and Radio from the program you are currently watching.
FAVOURITE PROGRAMME SETUP A Selecting favourite programme Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. F Favourite G F Favourite (Only 42/50PJ2**, 50/60PK2**) (Except for 42/50PJ2**, 50/60PK2**) 1 P P A G E or 1 2 3 4 5 6 7 8 9 0 2 3 Select F a v o u r i t e . Select your desired programme. 4 Select F a v o u r i t e. Q.MENU G Q.
WATCHING TV / PROGRAMME CONTROL INPUT LIST HDMI, AV1, 2(SCART), AV3(Except for 42/50PJ2**, 50/60PK2**), Component and RGB(Except for 42/50PJ2**, 50/60PK2**) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using T V / R A D button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode.
DATA SERVICE (This menu is enabled only in Ireland. ) This function allow users to choose between M H E G ( D i g i t a l T e l e t e x t ) and T e l e t e x t if both exist at the same time. If only one of them exists, either M H E G or T e l e t e x t is enabled regardless of which option you selected.
WATCHING TV / PROGRAMME CONTROL SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. ■ OPTION Move WATCHING TV / PROGRAMME CONTROL Menu Language : English Audio Language : English Subtitle Language : English Image shown may differ from your TV. OK Disabled Assistance Country : UK Input Label SIMPLINK : On Simple Simple Manual Manual E 1 MENU Select OPTION.
This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. O f f”.
WATCHING TV / PROGRAMME CONTROL Connecting to Home Theater with the SIMPLINK logo. Connect the H D M I / D V I I N 1(or H D M I / D V I I N), H D M I I N 2(Except for 42/50PJ2**) or H D M I I N 3(Only 50/60PK5**, 50PK7**) terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables.
SIMPLINK Functions SIMPLINK Menu button and then OK button to select the desired SIMPLINK source. T V v i e w i n g : Switch to the previous TV programme regardless of the current mode. 2 D I S C p l a y b a c k : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.
WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game WATCHING TV / PROGRAMME CONTROL 1 AV MODE Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. Off Cinema Game Sport Press the AV MODE button repeatedly to select the desired source.
INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. D a y and N i g h t of the P i c t u r e M o d e cannot be initialized. But the settings of It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. O n", the message to enter the password appears.
TO USE THE BLUETOOTH (Only 50/60PK5**) Bluetooth? Bluetooth is a short distance networking technology using 2.4 GHz frequency to connect various types of information devices such as computers, cell phones and PDAs, as well as digital appliances through wireless connection, without having to connect any cable, to enable data exchange.
SETTING THE BLUETOOTH If you want to listen to the broadcasted sound using the Bluetooth headset or receive the jpeg images from an external device and view them on the TV, listen to music from cell phone(Bluetooth device), you can use the wireless communication without having to connect any cables. O n”. You can use the BLUETOOTH menu by selecting “O O f f”.
TO USE THE BLUETOOTH SET TV PIN To accept connection from an external Bluetooth device or to connect to an external Bluetooth device, the PIN needs to be entered. For details on how to set the PIN of the external Bluetooth device, refer to the user manual of the applicable device. The TV PIN is composed of numbers of up to 10 digits. The TV PIN must have more than 1 digit.
BLUETOOTH HEADSET When you select the Bluetooth headset, you can listen to the TV sound in the Bluetooth headset through wireless communication. You must pair it with any new Bluetooth device before the first use. For details, refer to the user manual of the applicable device. A maximum of 12 devices can be paired. When the unit is searching for the Bluetooth headset, other buttons except for the “Stop” (OK button) do not work.
TO USE THE BLUETOOTH Disconnecting the Bluetooth headset during use 1 3 MENU Select B L U E T O O T H. OK Disconnect the Bluetooth headset. 2 OK OK Select B l u e t o o t h H e a d s e t. When requesting to connect to TV from the Bluetooth headset TO USE THE BLUETOOTH 44 When the Bluetooth menu is "On" and there is a connection request from the headset, this message is dispalyed. Not all headsets support the this feature.(Refer to the user manual of the applicable Bluetooth headset.
MANAGING REGISTERED BLUETOOTH DEVICE If there are no devices registered, Registered Bluetooth Device menu will be deactivated and cannot be used. When 12 devices are registered, you cannot register any more devices, and the external device will no longer be able to pair up with the TV. In this case, you should delete one (disconnect first if a device is connected to the TV) and then you can register another device.
TO USE THE BLUETOOTH MY BLUETOOTH INFORMATION This function provides the My Bluetooth Information to the user. "Edit" will be available when TV is not connected with any device. You can edit the My Device Name. You can check the My Device Address.
RECEIVING PHOTOS FROM EXTERNAL BLUETOOTH DEVICE For details on how to send photos(only JPEG) from the external Bluetooth device to TV, refer to the user manual of the applicable device. Receiving file(s) F 1/3 G E Close • When you select C l o s e with the button, the OSD will disappear. And when you press the OK button again, it will appear again. ■ (Rotate) : Rotate photos. Rotates the photo 90° clockwise upon O K button on (Rotate).
TO USE A USB DEVICE It is not possible to use USB function in 42/50PJ2**, 50/60PK2** models. G When connecting a USB device When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated or while the Bluetooth Headset is connected. When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List in the USB menu.
! NOTE ■ Image shown may differ from your TV. This feature is not available for all models. G In order to avoid losing the USB memory stick, use the USB connector(sold separately) to fix the USB memory stick to the USB connector holder of the TV. ■ USB connector holder USB Input Port USB Connector (sold separately) - Fix the one end of the USB connector to the USB memory stick and the other end to the USB connector holder. PHOTO LIST PHOTO(*.
TO USE A USB DEVICE Photo Selection and PopUp Menu Page 2/3 Drive1 JMJ001 1366x768, 125KB Up Folder No Marked E Photo List Up Folder KR103 09/10/2008 KR101 09/10/2008 KR104 09/10/2008 KR102 09/10/2008 KR105 09/10/2008 JMJ001 09/10/2008 JMJ005 09/10/2008 JMJ002 09/10/2008 JMJ006 09/10/2008 JMJ003 09/10/2008 JMJ007 09/10/2008 JMJ004 09/10/2008 JMJ008 09/10/2008 E Popup Menu TO USE A USB DEVICE Photo List Page 2/3 Drive1 JMJ001 1366x768, 125KB Up Folder Page Change P
How to view photo Detailed operations are available on full-sized photo view screen.
TO USE A USB DEVICE 6 OK Select the Slideshow , B G M, D e l e t e , Option or H i d e. • Use TO USE A USB DEVICE 52 BGM Delete Q.MENU Option Hide • Use button to select and control the menu on the full-sized screen. G S l i d e s h o w : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. ■ Set the time interval of the slide show in O p t i o n.
Using the Photo List function Choose Options. Set Photo View Set Video. Set Audio. 1/17 Slideshow 1 Q.MENU Delete Q.MENU Option Hide Previous Show the PopUp menu. 2 Select S e t P h o t o V i e w, S e t V i d e o or S e t A u d i o. OK TO USE A USB DEVICE G BGM When you select the S e t P h o t o V i e w , Set Photo View. F F Music Folder Fast F Slide Speed G ... Repeat F On F Random F Off F Previous 1 2 Show the S l i d e S p e e d or M u s i c F o l d e r.
TO USE A USB DEVICE When you select the S e t V i d e o , G Set Video. Vivid F • Contrast F Picture Mode 100 F • Colour 70 F F 70 F F • Sharpness F 50 F F • Brightness • Tint 0 F R G F • Colour Temp. 0 F W C F F Medium F • Noise Reduction • Picture Reset Previous TO USE A USB DEVICE 1 Make appropriate adjustments.(Refer to p. 76, 79, 81) When you select the S e t A u d i o , G Set Audio.
MUSIC LIST You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 to 320 • Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz • Sampling rate MPEG2 Layer3 : 16 kHz, 22.
TO USE A USB DEVICE Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. P l a y (During stop) : Play the selected music titles. One playback of a piece of music finishes, the next selected one will be played. When there are no selected music titles to play, the next one in the current folder will be played. If you go to a different folder and press the O K button, the current music in playback will stop. G P l a y M a r k e d : Play the selected music titles.
■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. Q. MENU Option ! NOTE TO USE A USB DEVICE When a music file is played, is displayed behind the title. G A damaged or corrupted music does not play but displays 00:00 in playtime.
TO USE A USB DEVICE Using the Music List function, play Page 2/3 No Marked E Music List Title Music S003 Duration Up Folder 00:00/01:34 S001 03:33 S002 04:45 S003 01:30 S004 02:37 Set Audio Play. 01:58 S005 Up Folder Choose Options. Set Audio. E Navigation 1 Q.MENU Popup Menu Page Change MARK Mark Q.MENU Option Exit Previous Show the PopUp menu. TO USE A USB DEVICE 2 G P Select S e t A u d i o P l a y or S e t A u d i o.
When you select the S e t A u d i o , G Set Audio. Standrd Off F Off • Balance 0 F L F F • Clear Voice II R F • Auto Volume F F F Sound Mode Previous 1 Make appropriate adjustments.(Refer to p. 85 to 89) TO USE A USB DEVICE 2 Show the S o u n d M o d e, A u t o V o l u m e, C l e a r V o i c e I I, B a l a n c e.
TO USE A USB DEVICE MOVIE LIST(Except for 42/50PJ3**) You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
File Extension name mpg, mpeg, vob Max Resolution Video Decoder Audio Codec MPEG1, MPEG2 Dolby Digital,MPEG,MP3,LPCM dat MPEG1 Dolby Digital,MPEG,MP3,LPCM ts,trp,tp MPEG2, H.264/AVC Dolby Digital,AAC,MPEG mp4 MPEG4 SP, MPEG4 ASP, DivX 3.11, Dvix 4.12, Dvix 5.x Dolby Digital,HE-AAC, AAC,MPEG,MP3,LPCM Dvix 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03 Xvid 1.10–beta 1, Xvid 1.10-beta 2, H.264/AVC avi MPEG 2, MPEG 4 SP, MPEG4 ASP, DivX 3.
TO USE A USB DEVICE Movie Selection and PopUp Menu Page 2/3 No Marked Movie M002 E Movie List Duration Title Up Folder 640x480, 720KB Up Folder Favorite Music 00:03:33 M001 00:04:45 M002 00:01:30 M003 00:03:13 00:02:51 M004 E Navigation Popup Menu P Page Change MARK Mark Exit Play : Play the selected movie. DivX Play is executed while screen changes. G M a r k A l l : Mark all Movie in the folder. G U n m a r k A l l : Deselect all marked movies.
Using the Movie List function, play Choose Options. Set Video Play. Set Video. Set Audio. Q. MENU Option 1 Q.MENU Show the PopUp menu. 2 Select S e t V i d e o P l a y, S e t V i d e o or S e t A u d i o. OK Picture Size F Full Subtitle Language G 1 Audio Language Off . Sync 0 . Position 0 . Size Normal Previous 1 P i c t u r e S i z e : Selects your desired picture format during movie play.
TO USE A USB DEVICE When you select the S e t V i d e o , G Set Video. Vivid F • Contrast F Picture Mode 100 F • Colour 70 F F 70 F F • Sharpness F 50 F F • Brightness • Tint 0 F R G F • Colour Temp. 0 F W C F F Medium F • Noise Reduction • Picture Reset Previous 1 Make appropriate adjustments.(Refer to p. 76, 79, 81) TO USE A USB DEVICE When you select the S e t A u d i o , G Set Audio.
Using the remote control When playing, FF / GG repeatedly, press the R E W( FF) button to speed up FF(x2) -> FFF(x4) -> FFFF(x8) -> FFFFF(x16) ->FFFFFF(x32) . repeatedly, press the F F( GG) button to speed up GG(x2)-> GGG(x4) -> GGGG(x8) -> GGGGG(x16) -> GGGGGG(x32). ■ II During playback, press the P a u s e ( I I) button. ■ Still screen is displayed. ■If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state.
TO USE A USB DEVICE DIVX REGISTRATION CODE(Except for 42/50PJ3**) Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) USB Move OK USB Photo List Photo List Music List Music List Movie List Movie List DivX DivXReg. Reg.
DEACTIVATION(Except for 42/50PJ3**) The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
Button Function in 8 Day Guide Mode Programme Guide 1 YLE TV1 DTV ALL DTV DTV DTV GREEN Enter Date setting mode. 15:00 Kungskonsumente Antigues Roadshow Mint Extra TV2: Farmen The Drum The Drum You Call The Hits Fashion Essentials ... ... ... Tänään otsikoissa 4 TV.. DTV DTV DTV 5 YLE FST 6 CNN DTV DTV DTV DTV DTV DTV 8 YLE24 DTV DTV mode. 14:00 2 YLE TV2 DTV DTV YELLO YELLOW Enter Timer Record/Remind setting Fri. 6 Apr. 1 YLE TV1 DTV 6 Apr. 2007 15:09 E RED Change EPG mode. ...
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE) Button Function in Extended Description Box DTV Information Text Up/Down. DTV 6 Apr. 2007 YELLO YELLOW Enter Timer Record/Remind setting mode. The detail information on or off. INFO or GUIDE Switch off EPG. BACK 6 Apr. 2007 15:09 DTV E INFO i Info. Exit Schedule Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 1 6 : 9, J u s t S c a n, O r i g i n a l, F u l l W i d e, 4 : 3, 1 4 : 9, Z o o m and C i n e m a Z o o m. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. 1 2 Q.MENU Select A s p e c t R a t i o.
PICTURE CONTROL • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen.
PICTURE WIZARD This feature let you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example. In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the E n e r g y S a v i n g l e v e l or by setting the P i c t u r e M o d e. When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished. S c r e e n O f f’ while tuned to a radio station channel will reduce power consumption.
PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Standard Strengthen the contrast, brightness, colour and sharpness for vivid picture. The most general screen display status. Optimizes power consumption. Optimizes video for watching movies. Optimizes video for watching sports events. Optimizes video for playing games.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Colour Adjusts intensity of all colours.
PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “ P i c t u r e R e s e t ” function for each P i c t u r e M o d e.
PICTURE CONTROL EXPERT PICTURE CONTROL By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos.
*This feature is not available for all models. Dynamic Contrast (Off/Low/High/Auto(Onl y APS mode) ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Colour (Off/Low/High/Medium) ■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
PICTURE CONTROL Colour Standard (SD/HD) ■ Expert Pattern (Off/Expert1/Expert2) A Colour Filter (Off/Red/Green/Blue) ■ A ■ Colour Temperature (Medium/Warm/Cool) Converts the colour of a different video to HD colour. This function is set for SD video (BT-601) and HD video (BT-709) colour format. This is the pattern necessary for expert adjustment. This function is enabled in "Picture Mode - Expert" when you watch DTV. This is the function to filter the specific colours of the video.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move PICTURE OK E E 50 • Brightness 50 • Sharpness 70 • Sharpness 70 • Colour 70 • Colour 70 0 • Colour Temperature 0 R G All picture setting ?• Tint G 0 Rwill be resetted.
PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
DEMO MODE Display the slide show to explain the various logo of this TV. It is not possible to use D e m o M o d e in H o m e U s e mode. In S t o r e D e m o, D e m o M o d e is automatically set to O n. Once D e m o M o d e is set to O f f in S t o r e D e m o, D e m o M o d e does not run and only the screen is reset. The screen is reset automatically after 5 minutes in D e m o M o d e.
PICTURE CONTROL MODE SETTING H o m e U s e ” mode for the best picture in your home environment. We recommend setting the TV to “H S t o r e D e m o ” mode is an optimal setting for displaying at stores..
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Move Auto Volume : Off ClearVoice VoiceIIII Clear Off : :Off 33 Balance Sound Mode AUDIO OK 0 L ClearVoice VoiceIIII Clear Off : :Off Sound Mode : Standard 33 : Standard 0 L • Level : Off • Infinite Sound : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O.
PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; S t a n d a r d, M u s i c, C i n e m a, S p o r t or G a m e and you can also adjust the T r e b l e, B a s s. S o u n d M o d e lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. S t a n d a r d, M u s i c, C i n e m a, S p o r t and G a m e are preset for optimum sound quality at the factory.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE AUDIO Move Auto Volume : Off Clear Voice II : Off 3 Balance 0 Sound Mode AUDIO OK L R Standard (User) :: Standard Auto Volume : Off Clear Voice II : Off Sound Mode 2 0 Standard (User) :: Standard L R Standard Standard (User) • Infinite Sound : Off • Infinite Sound : Off Music • Treble 50 • Treble 50 Cinema • Bass 50 • Bass 50 Sport • Reset E MENU OK 3 Balance • Reset 1 Move Game E Select A U D I O.
BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Move Auto Volume : Off Clear Voice II : Off 3 Balance 00 Sound Mode AUDIO OK L R : Standard Auto Volume : Off Clear Voice II : Off 00 : Standard L Balance • Infinite Sound : Off • Infinite Sound : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 E Select A U D I O. OK Select B a l a n c e. OK Make desired adjustment.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In A V 1, A V 2, A V 3(Except for 42/50PJ2**, 50/60PK2**), C O M P O N E N T, R G B(Except for 42/50PJ2**, 50/60PK2**) and H D M I 1 or H D M I with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want.
SOUND & LANGUAGE CONTROL SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM(Pulse-code modulation).
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move OK AUDIO Move E E Balance 0 Sound Mode Balance 0 Sound Mode : Standard • Infinite Sound : Off • Treble 50 • Bass 50 1 MENU 2 OK OK • Bass 50 • Reset Digital Audio Out : PCM Digital Audio Out : PCM TV Speaker TV Speaker E : Off • Treble 50 configuration... Resetting sound mode : On E Select A U D I O. Select R e s e t.
SOUND & LANGUAGE CONTROL AUDIO DESCRIPTION (IN DIGITAL MODE ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.
I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Q.MENU Select A u d i o. 2 Select the sound output. OK Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I, DUAL II, DUAL I+II Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
SOUND & LANGUAGE CONTROL NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. SOUND & LANGUAGE CONTROL 96 1 When NICAM mono is received, you can select N I C A M M O N O or M O N O. 2 When NICAM stereo is received, you can select N I C A M S T E R E O or M O N O.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 OK Select your desired language. OK Select your country. 2 * If you want to change Language/ Country selection 1 Select O P T I O N. MENU 2 OK Select M e n u L a n g u a g e or C o u n t r y. OK Select your desired language or country. 3 4 Save. • Press the M E N U / E X I T button to return to normal TV viewing.
SOUND & LANGUAGE CONTROL LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
TIME SETTING AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work.
SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. 1 2 Q.MENU Select S l e e p T i m e r. Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 m i n.. • When you switch the TV off, the preset sleep timer is cancelled. • You can also adjust S l e e p T i m e r in the T I M E menu.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’, ‘0’, ‘0’, ‘0’. If a channel is locked, enter the password to unlock it temporarily.
BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. O n”. It is available to use this function in L o c k S y s t e m ”O Enter a password to watch a blocked programme.
PARENTAL CONTROL / RATINGS PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
EXTERNAL INPUT BLOCKING Enables you to block an input. O n”.
PARENTAL CONTROL / RATINGS KEY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. LOCK Move OK LOCK Move OK Set Password Set Password Lock System : On Lock System : On • Block Programme • Block Programme • Parental Guidance • Parental Guidance • Input Block • Input Block KeyLock Lock Key Off : :Off Key Lock Key Lock : Off : Off Off On On 1 Select L O C K.
TELETEXT This feature is not available in all countries. ENERGY AV MODE INPUT TV/RAD TV/ RAD SAVING Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TELETEXT FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the T . O P T button and then use button to select i menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
DIGITAL TELETEXT *This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
APPENDIX TROUBLESHOOTING The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Install new batteries. A The remote control does not work Power is suddenly turned off Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted.
The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers + or - button. Press the Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust B a l a n c e in menu option. Unusual sound from inside the TV A A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) Weight (Width x Height x Depth) Weight 42PJ3** 42PJ350-ZA 42PJ350N-ZA 50PJ3** 50PJ350-ZA 50PJ350N-ZA 988.0 mm x 678.7 mm x 260.0 mm 1171.4 mm x 781.8 mm x 309.7 mm 988.0 mm x 678.7 mm x 260.0 mm 1171.4 mm x 781.8 mm x 309.7 mm without stand 988.0 mm x 617.8 mm x 55.3 mm 1171.4 mm x 720.9 mm x 55.3 mm 988.0 mm x 617.8 mm x 55.3 mm 1171.4 mm x 720.9 mm x 55.3 mm with stand without stand 21.6 kg 20.0 kg 30 kg 27.6 kg 21.
APPENDIX MODELS 42PJ5** 50PJ5** 42PJ550-ZD / 42PJ560-ZA 50PJ550-ZD / 50PJ560-ZA 42PJ550N-ZD 50PJ550N-ZD 50PJ6** 42PJ6** 42PJ650-ZA 42PJ650N-ZA 50PJ650-ZA 50PJ650N-ZA with stand 988.0 mm x 682.7 mm x 260.0 mm 1171.4 mm x 786.2 mm x 309.7 mm 999.6 mm x 683.2 mm x 260.0 mm 1184.0 mm x 801.0 mm x 309.7 mm (Width x Height x Depth) without stand 988.0 mm x 621.8 mm x 55.3 mm Weight with stand without stand 21.6 kg 20.
IR CODES *This feature is not available for all models. Code (Hexa) 95 08 0B 79 F0 45 43 AB 40 41 07 06 44 28 AA 30 02 03 1E 09 00 01 10 to 19 53 1A 72 71 63 61 20 21 39 7E 5B 91 BA B1 B0 8F 8E Function Energy Saving POWER INPUT RATIO TV/RAD Q.MENU MENU GUIDE Up ( ) Down ( ) Left ( ) Right ( ) OK( ) BACK INFO i AV MODE + FAV ( MARK ) MUTE P P Number Key 0 to 9 LIST Q.VIEW RED Key GREEN Key YELLOW Key BLUE Key TEXT T.OPT(T.
APPENDIX COMPONENT IN EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. N 1 IN Type of Connector; D-Sub 9-Pin Male No.
Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p .121 OPTION Move OK OPTION E E SIMPLINK : On Set ID ID Set ::11 Simple Manual Set ID ID Set ::11 ISM Method : Normal ISM Method : Normal Demo Mode : Off Demo Mode : Off Mode Setting : Home Use Mode Setting : Home Use Simple Manual F 1 G Close Factory Reset Factory Reset MENU OK : On SIMPLINK 1 Move Input Label Input Label Select O P T I O N. 2 OK 3 OK Select S e t I D.
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Command Reference List COMMAND COMMAND DATA 1 2 (Hexadecimal) 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07. Brightness 08. Colour 09. Tint 10. Sharpness 11. OSD Select 12.
01. Power (Command: k a) 0 4 . V o l u m e M u t e (C o m m a n d : k e ) G To control Power On/Off of the set. G To control volume mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] You can also adjust mute using the MUTE button on remote control. Transmission Data 00 : Power Off Ack [k][e][ ][Set ID][ ][Data][Cr] 01 : Power On G To show Power On/Off.
APPENDIX 0 9 . T i n t (C o m m a n d : k j ) G To adjust the screen tint. You can also adjust tint in the PICTURE menu. 13. Treble (Command: k r) G To adjust treble. Transmission You can also adjust treble in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][r][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping 1’. See page 121. Ack Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 121.
17. ISM Method(Command: j p) 19. Auto Configure(Command: j u) G To adjust picture position and minimize image shaking G To control the ISM method. You can also adjust ISM Method in OPTION menu. Transmission automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] [j][p][ ][Set ID][ ][Data][Cr] Data 01: To set Ack Data 02: Orbiter 04: White wash 08: Normal 20: Colour Wash [u][ ][Set ID][ ][OK/NG][Data][x] 20.
APPENDIX 22. Key(Command: m c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 115. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 2 3 . I n p u t s e l e c t (C o m m a n d : x b ) (Main Picture Input) G To select input source for main picture.
Open source software notice The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements: GPL EXECUTABLES: • Linux kernel 2.6 • busybox • lzo • u-boot LGPL LIBRARIES: • uClibc MPL LIBRARIES: • nanox LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.
APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library".
APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
MOZILLA PUBLIC LICENSE Version 1.1 --------------1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3.
APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License. (d) Notwithstanding Section 2.
(b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.
APPENDIX 6.3. Derivative Works.
10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No.
