PLASMA TV OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back mation to your dealer when you Model number : Serial number : P/NO : 38289U0561A (MF056B, require 141K and quote this inforservice.
Safety Warnings Instructions Safety Safety It is recommended that 42PX4RH / 42PX5RH / 50PX4RH / 50PX5RH model ? than 6561 feet (2000m) to the best get quality picture only be used at an altitude of less and sound. W WARNING Do not place the sources such This may - use or place This may - heat cause a Do not any as set in direct registers, sunlight stove and or heat so on. Do not - fire.
Safety Warnings * Safety instructions have two kinds of WARNING NOTES information, and each meaning of it is as below. The violation of this instruction may cause serious The violation of this instruction may cause light injuries injuries and even of the damage or death. product. Take care of under danger that may happen specific condition. NOTES Never touch the power - This may cause an plug with a wet hand. Ensure the power cord doesn't trail objects like a heater.
Contents Contents Contents Special Safety Warnings SafetyInstructions.......................2~3 Menu Options ChildLock..............................27 ISM Method (Image Sticking Minimization) . . . . . .27 LowPower..............................28 Introduction RemoteControlKeyFunctions................6 LocationandFunctionofControls . . . . . . . . . . .7~8 Demo.............................28 Index..................................28 Screen Menu HDMI..............................
Introduction Introduction What is If a Plasma Display ? inputted to gas in glass panels, ultraviolet rays is outputted and fused with a fluorescent moment, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. voltage 160° is Wide - A Plasma angle substance. At this range of vision Display provides than 160° more angle range of vision so that you can get a picture without distortion from any direction.
Introduction Remote Control Control - - When There Key Functions using the remote control aim it at the remote control sensor of the set. maybe a defect in consecutive operation of remote control in a specified brightness according INPUT Selects the TV, AV, Component, RGB or HDMI modes. switches the set on from standby. POWER switches the set INPUT MULTIMEDIA screen watching the TV.
Introduction Location and Function of of Controls Controls - - Shown is a simplified representation of the set. Here shown may be somewhat different from your set. 10 7 8 9 MENU 3 4 2 1 1. INPUT Remote Control Sensor OK VOL PR 5 6 7. INDEX Switches FRONT 2. Power Button Switches the set on from standby or off to standby. 8. INPUT Button Selects the TV, the set is turned AV, Component, RGB Switches the set 4.
Introduction Location and Function of of Controls Controls AVNPU2 S-VIDEO VIDEO L/MON AUDIO 9 R AUD VDO AUD VDO O O AC INPUT L HDMI/ MNNTNUT RGB INPUT AUDIO INPUT DVI(VIDEO) R L MNT Antenna R UTUT AUD O L R A A D VA RS-232C INPUT REMOTE CONTROL (CONTROL/SERVICE) (MONO) MNNTNUT 1 1. 2 HDMI(DVI VIDEO) 3 COMPUTER, DVD 4 / AUDIO INPUT / RGB INPUT Connect the monitor AVNUT SVIDO 5 or 2. REMOTE CONTROL 3. RS-232C STB to this socket.
Installation External Equipment Setups Setups V iewing Viewing Antenna Connection - Be careful for the bronze wire not to be banded in Apartments (connecting to wall antenna connecting to antenna input port.
Installation External Watching After - Equipment Cable TV for subscribing local cable TV station and a For further information of cable - Setups Setups V iewing Viewing installing a converter you can contact the local cable TV station. TV, < Back of the set panel To watch cable TV > 1. O AUD L CO D O O L PONNNPU2 ONO select AV1 R OU Use the INPUT button the remote control to on O AUD R watch cable TV. PU - AUD L A O or AV2.
Installation DVD Watching How to connect < Connect DVD video Y, PB, PR of COMPONENT INPUT and audio outputs outputs Back of the set panel > to to Audio sockets of AUDIO INPUT. O AUD D O L How to Turn 1. Use INPUT 2. O L ONO R OU PU AUD the DVD on AUD R COPONNNPU2 RGB INPUT use O player, and insert DVD.
Installation External Connecting - - - - - V iewing Viewing Equipment Setups Setups PC To enjoy vivid picture and sound, connect a PC to the set. Avoid keeping a fixed image on the set's screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. Connect PC to the RGB INPUT(PC INPUT) or HDMI INPUT(DIGITAL RGB INPUT) port of the set; change the resolution output of PC accordingly.
Installation Displayable Monitor Specification Specification RGB / HDMI mode 42PX4R / 42PX5R Series Resolution Horizontal 50PX4R / 50PX5R Series Vertical Frequency(KHz) Frequency(Hz) 31.468 70.09 640x350 848x480 852x480 800x600 832x624 31.468 70.09 85.08 37.861 85.08 31.469 70.08 31.469 70.08 720x400 37.927 85.03 37.927 85.03 31.469 59.94 31.469 59.94 35.000 66.66 35.000 66.66 37.861 72.80 37.861 72.80 37.500 75.00 37.500 75.00 43.269 85.00 43.269 85.00 31.
Installation - HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing. - - - - This set High-Definition Multimedia Interface (HDMI) or Input of Digital Visual Interface(DVI). This set supports HDCP (High-bandwidth Digital Contents Protection) Protocol for the set (480p, 720p, 1080i) modes.
Installation Reference Cable sample HDMI Cable (not supplied with the Analog product) (not supplied How to with the 3. 4. with the product) product) use 1. Connect the HDMI/DVI Source 2. Turn (RCA type) Analog Audio Cable (Stereo to RCA type) (not supplied with the product) HDMI to DVI Cable (not supplied Audio Cable Devices(DVD Player or Set Top Box or PC) and the set. display by pressing the POWER button on the set and HDMI/DVI Source Devices remote control.
Installation Accessories M ? LG TV ASmark Remote Control handset Owner's Manual 2-Eye Bolts 1.5V 1.5V Power Cord Alkaline batteries Joining - the set Secure the set assembly to the wall to assembly by joining it to a prevent the wall by using tumbling Eye Bolts/Wall brackets. Secure the set assembly to the (not supplied with the product), ? - set If the set is to be mounted on a desk top, insert the 2 Eye-Bolts and tighten them securely in the upper holes as shown.
Installation Installation ? ? The set Options Options be installed in different ways such as on a wall, or on a desktop etc. Install this set only in a location where adequate ventilation is available. can Wall Mount: Horizontal Installation The set ? can be installed on a (For further information, refer Mounting Bracket Installation To Mount on a wall Desktop as shown above. ? Pedestal Installation The set can be mounted on a desk as shown above.
Operation T urning Turning - When using Turning on the remote the set If the set on the set was or the set is switched to PR D / E button (power cord is still on or menus can be shown on the screen 2. Press the G button and then use D 3. Press the G button and then use D point on or mode. press the PLASMA TV the set on, the on-screen or press the POWER, INPUT, MULTIMEDIA, PR D / E or D / E or on. in the selected use D / E r / language.
Operation Channel Channel Menu Auto - Options Options Programme Tuning All stations that be received are stored 1. Press the MENU button and then use D can by this method. It is recommended that you use auto programme during installation of this set. 2. Press the G button and then D / E button to select the STATION menu. STATION BG PAL : / E : PICTURE BG 2 Start SOUND TIME B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa /Australia) PAL I/II (U.K.
Operation Channel Channel Menu Fine - Options Options Tuning Normally fine tuning is only necessary if reception is poor. the 'Manual programme tuning' steps 1 to 2. 2. Press the G button and then D / E button to select Fine. 1. Repeat STATION PICTURE 3. Press the F / G button to fine tune for the best picture and sound. finely tuned programme will be indicated by yellow Programme edit Favourite programme SOUND 4. Press the OK button.
Operation Edit Programme - This function enables you to delete or skip the stored programmes. Also you can move gramme numbers or copy a blank station data into the selected programme number. 1. Press the MENU button and then use D / E button to select the STATION 2. Press the G button and then D / E button to select Programme edit. 3. Press the Deleting G button to display the Programme edit some stations to other pro- menu. Programme 0- menu. are shifted up 1. 2. 3. 4.
Operation Picture Menu PSM - - Options Options (Picture Status Memory) This function adjusts the set to the best picture appearance. When adjusting picture options (contrast, brightness, colour, sharpness is automatically changed to User. and tint (NTSC input only)) manually, PSM 1. Press the PSM button ? Each press of the PSM button Intelligent Eye ? ? ? You the screen display shown below.
Operation sRGB - When the set is connected to external equal image - equipment with the sRGB function, the colour difference is adjusted the of each other. This function works in the following mode 1. Press the MENU button and then RGB[PC], HDMI[PC]. : use D / E button to select the PICTURE menu. STATION PSM CSM 2. Press the G button and then use D / E PICTURE button to select sRGB. SOUND 3. Press the G button and then use D / E button to select On or G sRGB Off.
Operation Sound Sound Menu SSM - - Options Options (Sound Status Memory) This function lets you enjoy the best sound without any special adjustment because the set automatically selects the appropriate sound option based on the program content. When adjusting sound options (treble and bass) manually, SSM is automatically changed to User. 1. Press the SSM button. 2. Press the SSM button to select your desired sound.
Operation TV - - - Speaker You the internal speaker status. In COMPONENT 1/2, RGB[PC] and HDMI[PC] mode, there is no video signal. adjust can If you want to your external hi-fi stereo use 1. Press the MENU button and then system, TV speaker and/or variable audio turn off the internal speakers button to select the SOUND use D / E can be outputted even though of the set. menu. STATION SSM BBE 2. Press the G button and then use D / E PICTURE button to select TV Speaker.
Operation T ime Menu Setting - Options Options the Clock If current time setting is erased by a power failure 1. Press the MENU button and then the set is or / E button to select the TIME use D reset the clock. unplugged, menu. STATION G Clock -- : -- Off time 2. Press the G button and then / E use D PICTURE button to select Clock. On time Auto sleep SOUND 3. Press the G button and then 4. Press the G button and then use D use D / E button to adjust the hour.
Operation Menu Special Special Options Options Child Lock - The set be set up can so that it can only be used with the remote control. 1. Press the MENU button and then D / E button to select the SPECIAL menu. STATION Language Child lock 2. Press the G button and then D / E button to select Child lock. 3. Press the G button and then D / E button to select On PICTURE Set ID Off. Demo TIME 4.
Operation Special Special Menu Options Options Low Power - This is the function to reduce the power 1. Press the MENU button and then consumption of the set. button to select the SPECIAL use D / E menu. STATION Language Child lock 2. Press the G button and then 3. Press the G button and then button to select Low power. use D / E use D / E button to select On PICTURE Low power SOUND or GOn Off Set ID Off. Demo TIME 4. Press the EXIT button to return to normal TV ISM Method viewing.
Operation Screen Screen Menu Auto - - Options Options Configure Automatically adjusts picture position and minimizes image shaking. This function works in the following mode : RGB[PC]. 1. Press the MENU button and then use D button to select the SCREEN / E menu. STATION Auto config. Manual 2. Press the G button and then use D button to select Auto / E position of the image is still not correct, 4. If picture needs to be adjusted the Manual config..
Operation Screen Screen Menu the Picture Format Setting - You Options Options watch the can screen in various picture formats; Spectacle, Full 14:9 and (option), Original, 4:3, 16:9 (Wide), Zoom. 1. Press the MENU button and then 2. Press the G button and then use D 3. Press the G button and then Original, 4:3, 16:9, 14:9 or use D / E / E button to select the SCREEN menu. button to select ARC.
Operation Screen Position - This function is available after adjusting Zoom +/-. 1. Press the MENU button and then D / E button to select the SCREEN menu. 2. Press the G button and then D / E button to select Position. 3. Press the G button and then D / E or F / G button to 4. Press the EXIT button to return to normal TV STATION Auto PICTURE XGA Mode ARC SOUND the adjust config. Manual config. position. Zoom +/Position D G F G E TIME Cinema NR viewing.
Operation PIP - - Feature (Picture-in-Picture) (Picture-in-Picture) PIP lets you view 2 different inputs (sources) on your set screen at the It's not available to use this function in TELETEXT mode. PIP Watching Press the PIP button to show the sub ? time. same Each press of PIP button changes picture. the screen display as shown below.
Operation eletext (option) Teletext T (option) - Teletext TOP (or is text) an optional function, therefore the set with the teletext only system can receive the teletext broadcast. - - Teletext is a free service broadcast by most TV stations which gives up-to-the-minute prices and many other topics. television programmes, share The teletext decoder of this set consists of TEXT information on news, weather, support the SIMPLE, TOP and FASTEXT systems.
Operation eletext (option) Teletext T (option) FASTEXT The teletext pages are colour coded along the bottom of the pressing the corresponding coloured button. screen and are selected by Page selection 1. Press the 2. You can button to select the index page. select the pages which are colour coded i the bottom line with the along same coloured buttons. 3. 4.
Operation - You the JPEG and MP3 file can use Notes When Memory on on removing or memory card may Memory a camera, device - - - - - - - use only in mode. your hands. Do not equipped to communicate the data between AV external the Memory or other devices use or the equipment. It's used in a digital PDA. Card to insert the correct memory card type in the between the two memory slots before insertion.) sure Do not bend, After drop or right direction.
Operation Notes on on Available Memory Memory Card Card Slot 2 * Check the direction of the (refer Memory - - - Card to the Memory card. pictures below) Slot 1 type Use the specified card based on the slot 8 types of Memory Card can be used for NTFS file system is not supported. location. this set.
Operation The JPEG Preview Decoding/The Image Supplied Spec Method Compression 4:4:4 Baseline JPEG Preview Image Display If How to insert and W W when an error occurs Inserting eject O O Image invalid format invalid format Image Image Display Display when there is when there is when there is thumbnail. decoding no "Corrupted file" the JPEG, based button If 3. again on button to Select the thumbnail. on screen. softly and slowly. mode. to exit the mode.
Operation Notes * on on Memory In this manual, the OSD (On Screen Display) may example to help you with the set operation. Select the Photo - Card When you plug a or be different from your set's because it is Music Media memory card or press the button, the below Please select where to Memory Memory screens move 1 MS/Pro Photo Music 2 CF/MD Photo Music Exit 1. Press D / E / F / G button to select 2. Press the OK button to enter the 3.
Operation JPEG JPEG File Viewing V iewing - * Options Options When you select Photo in In this Screen menu, you will OSD manual, the help you with the entry set (On Screen Display) may operation. now see a screen filled with thumbnail be different from your set's because it is photo just an media.
Operation JPEG JPEG File Viewing V iewing Options Options Mark/Unmark for JPEG file - - You can mark/unmark the file to view the desired file The selected file When pressing displays orange or use slide show for desired file conveniently. in colour. the OK button after marking a file, the marked file displays green in colour. W W Mark/Unmark for all files 1. In photo media, repeatedly 2.
Operation The - Image Adjustment You can display the selected image on the entire screen and do the various adjustments for the JPEG file. View Slide Show Delete Cancel 1. Press the D / E / F / G 2. Press the D / E 3. Adjust button to select JPEG file and then press the OK button. button to select View and then press the OK button The selected image will display on entire screen. the JPEG file. 1/15 F G Prev.
Operation JPEG JPEG File Viewing V iewing Options Options Slide Show 1.PresstheD/E/F/GbuttontoselectJPEGfileandthen press the OK button. 2. Press the button to select Slide Show / E D Marked and then press the OK button. with MARK using screen.) View Slide Show (If or Show you mark the file button, Show Marked is displayed on Delete Cancel 3. You choose the slide show can delayed time and effect. PresstheD/E/F/Gbuttontochoosetheslideshow delayed Delay 4.
Operation JPEG file Deletion and Cancel View Slide show Delete Cancel 1. Use the D / E / F / G 2. To delete the file, press the file?" message is up button to select JPEG file and then press the OK button. displayed, button to select Delete and then press the OK button. When "Do you want to delete the select YES (YES or NO) with F / G button. The file is deleted, all the following files are shifted D / E position.
Operation MP3 File - Playing Operation Operation Purchased MP3/music files may contain supported by this model. Screen copyright restrictions.
Operation * In this manual, the OSD (On Screen Display) may example to help you with the set operation. be different from your set's because it is just an Stop/Pause Playback W W Stop Playback To stop playback, press the To stop playback, press the OK, PR (D A button on / the remote control. E) button the set.
Operation MP3 File Jump - Playing Operation Operation Media Use this function to jump to other media during using music media. Please select where to Memory 1 MS/Pro Photo Memory move Music 2 CF/MD Photo Music Cancel 1. In music media, press the 2. Press the D / E 3. Press the D / E / F / G F button. button to select Jump media and then press the OK button. button to select desired media and then press the OK button. The screen displays each media list.
Operation MP3 file deletion and Cancel - It's to delete the music impossible during playback. Play Delete Cancel 1. Use the D button to select MP3 file and then press the OK button. / E 2. To delete the button to select Delete and then press the OK button. When "Do you want to delete the file?" message is displayed, select YES (YES or NO) with F / G button. The file is deleted, all the following files are shifted up one position.
Miscellaneous External Control Control Device Setup Setup Connect the RS-232C - input jack to an external functions externally. and control the set's How to connect external control ? Connect the serial ? RS-232C connection cables ? The set remote control and front computer or computer or an A/V control system) to the RS-232C jack on supplied with the set. panel controls (except main power) the Monitor back panel.
Miscellaneous Set ID - - Use this function to specify a set ID number. Mapping 1'. See page 53. Refer to 'Real Data 1. Press the MENU button and then use the D button to select the SPECIAL / E menu. STATION Language Child lock 2. Press the G button and then 3. Press the G button and then use D / E use button to select Set ID. F / G button to adjust ISM Method SOUND Low power Set ID Set ID to choose the desired PICTURE G 1 Demo TIME monitor ID number.
Miscellaneous 01. Power 04. Screen Mute (Command G To control Power On/Off of the TV. G To select mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 0 2 (Command : a) Power Off : 1:PowerOn screen Data 0 : Screen mute off 1 : Screen mute 2 d) : (Picture on) (Picture off) on Ack Ack [a][ ][Set ID][ ][OK][Data][x] [d][ ][Set ID][ ][OK][Data][x] G To show Power On/Off. Transmission 05.
Miscellaneous 09. Colour G To adjust the You can 2 (Command also screen adjust i) : 14.PIP/DW(Command2:n) G To control the PIP (Picture In picture)/DW. colour. colour in the PICTURE You menu. also control the PIP/DW can the remote control Transmission or in the PIP/DW [k][i][ ][Set ID][ ][Data][Cr] Transmission Data [k][n][ ][Set ID][ ][Data][Cr] Min:0~Max:64 * Refer to 'Real data mapping 1'. See page 53.
Miscellaneous 18. Balance (Command 2 : 23. PIP t) G To adjust balance. You can also adjust G balance in the SOUND Input To select Select input source ture mode. You menu. Transmission also can [k][t][ ][Set ID][ ][Data][Cr] Transmission Data [k][y][ ][Set ID][ ][Data][Cr] Min:0~Max:64 * Refer to 'Real data mapping 1'. See page 53.
Miscellaneous 26. Low Power (Command 30. Auto 1 : j, Command 2 : Configure (Command 1 : j, q) G To reduce the power consumption of the TV. You also adjust Low Power in SPECIAL can 1 :On It works only in RGB (PC) mode. [j][u][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][ ][Cr] :Off u) Transmission Transmission Data 0 : G To adjust picture position and minimize image shaking automatically. menu.
Miscellaneous 32. Key (Command G To send IR 34. 1 : remote m, Command 2 key : c) code. (Command source for sub 1 : x, Command 2 picture in PIP mode Transmission [x][y][ ][Set ID][ ][Data][Cr] [m][c][ ][Set ID][ ][Data][Cr] Key select G To adjust input Transmission Data Input code - Data Structure Refer to page 56~57.
Miscellaneous IR Code Code (NEC (NEC Format) How to connect G Connect your wired remote control to the Remote Control Remote Control IR Code port on the Monitor. (NEC Format) G Output waveform Single pulse, modulated with 37.
Miscellaneous Code Note 00 PRD R/C Button 01 PRE R/C Button 02 VOL D R/C Button 03 VOL E R/C Button 40 D R/C Button 41 E R/C Button 06 G R/C Button 07 F R/C Button 08 POWER R/C Button C4 POWER ON Discrete IR C5 POWER OFF Discrete IR 09 MUTE R/C Button 10 Number 11 Number 12 Number 13 Number 14 Number 15 Number 16 Number 17 Number 18 Number 19 Number 0B INPUT R/C Button 98 MULTIMEDIA R/C Button BF COMPONENT1 Discrete IR Code D4 COMPONENT2
Miscellaneous Code (Hexa) Function Note C8 EPF MENU R/C Button 7D MARK R/C Button AA INFO R/C Button BO PLAY R/C Button B1 STOP R/C Button BA PAUSE R/C Button Owner's Manual 57
Miscellaneous Programming G The remote is a multi-brand or a the Remote universal remote. It can be programmed to operate most remote-controllable devices of turn the device such other manufacturers. Note that the remote may not control all models of other brands. Programming a a code into a a 1. To find out whether your remote remote mode can operate the device without programming, on as a VCR and press the corresponding mode button on the remote.
Miscellaneous Programming Codes Codes VCRs VCRs Brand Codes Brand Codes AIWA 034 KENWOOD 014 034 AKAI 016 043 047 048 125 146 001 012 013 101 106 114 046 124 LG AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 043 (GOLDSTAR) 039 Brand Codes Brand Codes PORTLAND 108 TATUNG 039
Miscellaneous HDSTB Brand Codes Brand Codes Brand Codes PACE SKY SATELLITE 143 PANASONIC 060 PANSAT 121 ALPHASTAR DSR 123 133 134 AMPLICA 050 GENERAL INSTRUMENT 003 004 016 BIRDVIEW 051 126 129 031 059 101 CHANNEL MASTER 013 014 015 HITACHI 139 140 036 055 HOUSTON TRACKER 033 037 CHAPARRAL 008 009 057 104 CITOH 054 CURTIS MATHES 050 145 DRAKE 005 006 007 011 052 112 012 018 077 029 PERSONAL CABLE 039 051 080 086 PRESIDENT 019 102 101 135
Miscellaneous Notes Owner's Manual 61
Miscellaneous Checklist T Checklist roubleshooting Troubleshooting No picture & ? Check whether the set is turned ? Power cord inserted into wall outlet? ? Plug another cord was on. No sound Picture OK & product's plugged power cord into the wall outlet where the set's power in. ? Press the VOLUME ? Sound muted? Press MUTE button. ? Check whether the TV ? Check to (D) button. No sound causing ? The remote control doesn't work see to p.
Miscellaneous Product Specifications Specifications MODEL Width 42PX4R / 42PX4RH 50PX4R / 50PX4RH 42PX4R-TB / 42PX4RH-TB 50PX4R-TB / 50PX4RH-TB (inches / mm) 49.3 / 1252 57.6 / 1461 Height (inches / mm) 27.78 / 705.5 32.9 / 835 Depth (inches / mm) 11.29 / 286.7 13.1 / 331.3 / 70.06 / 31.78 121.7 / 55.
